Page 2 - © 2014 Seagate Technology LLC. All rights reserved.; Document Revision History; Revision
© 2014 Seagate Technology LLC. All rights reserved. Publication number: 100726011, Rev. A May 2014 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Enterprise Capacity 3.5 HDD and SeaTools are either tradem...
Page 3 - Seagate Enterprise Capacity 3.5 HDD v4 SAS Product Manual, Rev. A; Contents; PowerChoice
Seagate Enterprise Capacity 3.5 HDD v4 SAS Product Manual, Rev. A Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 6 - Seagate Technology Support Services
Seagate Enterprise Capacity 3.5 HDD v4 SAS Product Manual, Rev. A 1 For information regarding online support and services, visit: http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers &...
Page 7 - SAS P; COPE; This manual describes Seagate; other forms of encryption was necessary.; Computing Group (see
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 2 1.0 S COPE This manual describes Seagate ® Enterprise Capacity 3.5 HDD v4 SAS (Serial Attached SCSI) disk drives. Enterprise Capacity 3.5 HDD v4 drives support the SAS Protocol specifications to the extent described in this...
Page 8 - PPLICABLE STANDARDS AND REFERENCE DOCUMENTATION; TANDARDS; SAS Interface Manual; Electromagnetic compatibility
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 3 2.0 A PPLICABLE STANDARDS AND REFERENCE DOCUMENTATION The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depends on host equipment ...
Page 9 - Australian RCM Mark; Korean KCC
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 4 2.1.2 Electromagnetic compliance Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical appl...
Page 10 - European Union Restriction of Hazardous Substances (RoHS)
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 5 2.1.3 European Union Restriction of Hazardous Substances (RoHS) The European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical substances, including Lead, Cadmium, Mercury, Hexav...
Page 12 - ENERAL DESCRIPTION
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 7 3.0 G ENERAL DESCRIPTION Enterprise Capacity 3.5 HDD v4 drives provide high performance, high capacity data storage for a variety of systems including engineering workstations, network servers, mainframes, and supercomputer...
Page 13 - Seagate; EDIA DESCRIPTION
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 8 3.1 S TANDARD FEATURES Enterprise Capacity 3.5 HDD v4 drives have the following standard features: • Perpendicular recording technology• 1.5 / 3.0 / 6.0/12.0 Gb Serial Attached SCSI (SAS) interface• Integrated dual port SAS...
Page 14 - ROGRAMMABLE DRIVE CAPACITY; ACTORY
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 9 3.4 R ELIABILITY • Annualized Failure Rate (AFR) of 0.63%• Mean time between failures (MTBF) of 1,400,000 hours• Balanced low mass rotary voice coil actuator• Incorporates industry-standard Self-Monitoring Analysis and Repo...
Page 15 - ERFORMANCE CHARACTERISTICS; NTERNAL DRIVE CHARACTERISTICS; Format command execution time
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 10 4.0 P ERFORMANCE CHARACTERISTICS This section provides detailed information concerning performance-related characteristics and features of Enterprise Capacity 3.5 HDD v4 drives. 4.1 I NTERNAL DRIVE CHARACTERISTICS Drive ca...
Page 16 - Case A; Drive transfers the requested logical blocks to the initiator.; Case B; Refer to the
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 11 4.2 S TART / STOP TIME The drive accepts the commands listed in the SAS Interface Manual less than 3 seconds after DC power has been applied. If the drive receives a NOTIFY (ENABLE SPINUP) primitive through either port and...
Page 17 - Caching write data
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 12 4.4.1 Caching write data Write caching is a write operation by the drive that makes use of a drive buffer storage area where the data to be written to the medium is stored while the drive performs the Write command. If rea...
Page 18 - ELIABILITY SPECIFICATIONS; RROR RATES; The error rates stated in this manual assume the following:; Recoverable Errors
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 13 5.0 R ELIABILITY SPECIFICATIONS The following reliability specifications assume correct host and drive operational interface, including all interface timings, power supply voltages, environmental requirements and drive mou...
Page 19 - Hot plugging the drive
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 14 5.2 R ELIABILITY AND SERVICE Users can enhance the reliability of Enterprise Capacity 3.5 HDD v4 disk drives by ensuring that the drive receives adequate cooling. Section 6.0 provides temperature measurements and other inf...
Page 20 - Performance impact; over time but can’t predict instantaneous drive failures.; Maximum processing delay
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 15 5.2.3 S.M.A.R.T. S.M.A.R.T. is an acronym for Self-Monitoring Analysis and Reporting Technology. This technology is intended to recognize conditions that indicate imminent drive failure and is designed to provide sufficien...
Page 21 - Thermal monitor; Primary Temperature
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 16 5.2.4 Thermal monitor Enterprise Capacity 3.5 HDD v4 drives implement a temperature warning system which: 1. Signals the host if the temperature exceeds a value which would threaten the drive. 2. Signals the host if the te...
Page 22 - DST failure definition; The following conditions are considered DST failure conditions:; Implementation; DST has two testing options:
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 17 5.2.5.1 DST failure definition The drive will present a “diagnostic failed” condition through the self-tests results value of the diagnostic log page if a functional failure is encountered during DST. The channel and servo...
Page 23 - See “Seagate Technology Support Services” on page
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 18 5.2.5.2.4 Log page entries When the drive begins DST, it creates a new entry in the Self-test Results Log page. The new entry is created by inserting a new self-test parameter block at the beginning of the self-test result...
Page 24 - HYSICAL; OWER; POWER MANAGEMENT; PowerChoice modes
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 19 6.0 P HYSICAL / ELECTRICAL SPECIFICATIONS This section provides information relating to the physical and electrical characteristics of the drive. 6.1 P OWER C HOICE TM POWER MANAGEMENT Drives using the load/unload architec...
Page 25 - PowerChoice reporting methods; provides these reporting methods for tracking purposes:; Request Sense command reports; • Specified and accumulated Start/Stops and Load/Unload cycles; AC; DC; POWER REQUIREMENTS
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 20 6.1.1 PowerChoice reporting methods PowerChoice TM provides these reporting methods for tracking purposes: Request Sense command reports • Current power condition• Method of entry . Mode Sense command reports (mode page 0x...
Page 26 - Table 2
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 21 Table 2 6TB drive DC power requirements Notes 6.0Gb mode 12.0Gb mode (Amps) (Amps) (Watts) (Amps) (Amps) (Watts) Voltage +5V +12V [2] +5V +12V [2] Regulation [5] ± 5% [2] ± 5% [2] Avg idle current DCX [1] [7] 0.29 0.58 8.3...
Page 27 - Table 3
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 22 Table 3 4TB drive DC power requirements Notes 6.0Gb mode 12.0Gb mode (Amps) (Amps) (Watts) (Amps) (Amps) (Watts) Voltage +5V +12V [2] +5V +12V [2] Regulation [5] ± 5% [2] ± 5% [2] Avg idle current DCX [1] [7] 0.33 0.41 6.5...
Page 28 - Table 4
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 23 Table 4 2TB drive DC power requirements Notes 6.0Gb mode 12.0Gb mode (Amps) (Amps) (Watts) (Amps) (Amps) (Watts) Voltage +5V +12V [2] +5V +12V [2] Regulation [5] ± 5% [2] ± 5% [2] Avg idle current DCX [1] [7] 0.30 0.26 4.5...
Page 29 - Operating condition is defined as random 8 block reads.; General DC power requirement notes.; Conducted noise immunity
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 24 [1] Measured with average reading DC ammeter. Instantaneous +12V current peaks will exceed these values. Power supply at nominal voltage. N (number of drives tested) = 6, 35 Degrees C ambient. [2] For +12 V, a –10% toleran...
Page 30 - Current profiles; TB model current profiles
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 25 6.3.3 Current profiles The +12V (top) and +5V (bottom) current profiles for the Enterprise Capacity 3.5 HDD drives are shown below. Figure 1. 6TB model current profiles Note: All times and currents are typical. See Table 2...
Page 31 - TB model current profiles
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 26 The +12V (top) and +5V (bottom) current profiles for the Enterprise Capacity 3.5 HDD drives are shown below. Figure 2. 4TB model current profiles Note: All times and currents are typical. See Table 3 for maximum current re...
Page 32 - TB model current profiles
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 27 The +12V (top) and +5V (bottom) current profiles for the Enterprise Capacity 3.5 HDD drives are shown below. Figure 3. 2TB model current profiles Note: All times and currents are typical. See Table 4 for maximum current re...
Page 33 - TB models in 6Gb operation; TB models in 12Gb operation; Please refer to Table 2 for power dissipation numbers.
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 28 6.4 P OWER DISSIPATION 6TB models in 6Gb operation Please refer to Table 2 for power dissipation numbers. To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 4). ...
Page 34 - TB models in 6Gb operation; TB models in 12Gb operation; Please refer to Table 3 for power dissipation numbers.
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 29 4TB models in 6Gb operation Please refer to Table 3 for power dissipation numbers. To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 4). Locate the typical I/O ...
Page 35 - TB models in 6Gb operation; TB models in 12Gb operation; Please refer to Table 4 for power dissipation numbers.
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 30 2TB models in 6Gb operation Please refer to Table 4 for power dissipation numbers. To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 4). Locate the typical I/O ...
Page 36 - Temperature; Check Point; Location of the HDA temperature check point; Humidity; Image is for reference only, may not represent actual drive.
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 31 6.5 E NVIRONMENTAL LIMITS Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a stand...
Page 37 - Shock and vibration; b. Operating—abnormal
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 32 6.5.4 Shock and vibration Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is a...
Page 38 - Any; Recommended mounting
P ACKAGE SIZE P ACKAGED / PRODUCT WEIGHT D ROP HEIGHT <600 cu in (<9,800 cu cm) Any 60 in (1524 mm) 600-1800 cu in (9,800-19,700 cu cm) 0-20 lb (0 to 9.1 kg) 48 in (1219 mm) >1800 cu in (>19,700 cu cm) 0-20 lb (0 to 9.1 kg) 42 in (1067 mm) >600 cu in (>9,800 cu cm) 20-40 lb (9.1 to...
Page 39 - Vibration; Acoustics
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 34 6.5.4.2 Vibration a. Operating—normal The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding5 - 22 Hz 0.25 Gs, limited displa...
Page 41 - Mounting configuration dimensions (6TB models)
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 36 Figure 13. Mounting configuration dimensions (6TB models) N OTE The image is for mechanical dimension reference only and may not represent the actual drive.
Page 42 - BOUT; FIPS; Purpose; Example of FIPS tamper evidence labels.
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 37 7.0 A BOUT FIPS The Federal Information Processing Standard (FIPS) Publication 140-2 is a U.S. Government Computer Security Standard used to accredit cryptographic modules. It is titled 'Security Requirements for Cryptogra...
Page 43 - BOUT SELF; ATA ENCRYPTION; always in operation and cannot be disabled.; ONTROLLED ACCESS; authorized to perform the command.; Admin SP; ANDOM NUMBER GENERATOR
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 38 8.0 A BOUT SELF - ENCRYPTING DRIVES Self-encrypting drives (SEDs) offer encryption and security services for the protection of stored data, commonly known as “protection of data at rest.” These drives are compliant with th...
Page 44 - - CRYPTOGRAPHIC ERASE
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 39 8.5 D ATA BANDS When shipped from the factory, the drive is configured with a single data band called Band 0 (also known as the Global Data Band) which comprises LBA 0 through LBA max. The host may allocate Band1 by specif...
Page 45 - EFECT AND ERROR MANAGEMENT; RIVE INTERNAL DEFECTS; RIVE ERROR RECOVERY PROCEDURES
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 40 9.0 D EFECT AND ERROR MANAGEMENT Seagate continues to use innovative technologies to manage defects and errors. These technologies are designed to increase data integrity, perform drive self-maintenance, and validate prope...
Page 46 - SAS; SYSTEM ERRORS; Write retry count
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 41 * For read retry count, every tick ~ 5% of total error recovery. Valid range setting is 1-20. e.g. 1 ~ 5% 5 ~ 25% 20 ~ 100% Setting these retry counts to a value below the default setting could result in degradation of the...
Page 48 - Levels of PI; There are 4 types of Protection Information.; Setting and determining the current Type Level
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 43 9.8 P ROTECTION I NFORMATION (PI) Protection Information is intended as a standardized approach to system level LRC traditionally provided by systems using 520 byte for-matted LBAs. Drives formatted with PI information pro...
Page 49 - NSTALLATION; Power is supplied through the SAS connector.; Physical interface; RIVE ORIENTATION
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 44 10.0 I NSTALLATION Enterprise Capacity 3.5 HDD v4 disk drive installation is a plug-and-play process. There are no jumpers, switches, or terminators on the drive. SAS drives are designed to be used in a host system that pr...
Page 50 - Air flow
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 45 10.2 C OOLING Cabinet cooling must be designed by the customer so that the ambient temperature immediately surrounding the drive will not exceed temperature conditions specified in Section 6.5.1, "Temperature." The...
Page 51 - Breather hole location - top cover; ROUNDING; Do not cover breather hole on top cover.
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 46 10.3 D RIVE MOUNTING Breather Hole Do Not Cover Mount the drive using the bottom or side mounting holes. If mounting the drive using the bottom holes, ensure the drive is not physically distorted by attempting to mount it ...
Page 52 - NTERFACE REQUIREMENTS; FEATURES; Table 6; Table 7
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 47 11.0 I NTERFACE REQUIREMENTS This section partially describes the interface requirements as implemented on Enterprise Capacity 3.5 HDD v4 drives. Additional information is provided in the SAS Interface Manual (part number ...
Page 53 - SCSI; COMMANDS SUPPORTED; Table 8; Protocol Specific Logical Unit Information (90h)
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 48 11.3 SCSI COMMANDS SUPPORTED Table 8 lists the SCSI commands supported by Enterprise Capacity 3.5 HDD v4 drives. Table 8 Supported commands C OMMAND NAME C OMMAND CODE S UPPORTED Change Definition 40h N Compare 39h N Copy ...
Page 57 - PP 10 = Inquiry data for an Inquiry command received on Port A.
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 52 11.3.1 Inquiry data Table 9 lists the Inquiry command data that the drive should return to the initiator per the format given in the SAS Interface Manual . Table 9 Enterprise Capacity 3.5 HDD v4 inquiry data B YTES D ATA (...
Page 62 - ISCELLANEOUS OPERATING FEATURES AND CONDITIONS; Table 13 Miscellaneous features; Table 14 Miscellaneous status
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 57 11.4 M ISCELLANEOUS OPERATING FEATURES AND CONDITIONS Table 13 lists various features and conditions. A “Y” in the support column indicates the feature or condition is supported. An “N” in the support column indicates the ...
Page 63 - SAS device plug dimensions; C OF DATUM B
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 58 Figure 18. SAS device plug dimensions C OF DATUM B L 5.08 1.27 (6X) 1.27 (14X) 15.875 0.35MIN 15.875 33.43 0.05 B 4.90 0.08 0.84 0.05 (22X) 0.15 B P15 P1 S7 S1 SEE Detail1 0.30 0.05 (4X) 4.00 0.08 0.15 D 0.30 0.05 (2X) 41....
Page 64 - This section defines physical interface connector.; Detail A
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 59 Figure 19. SAS device plug dimensions (detail) 11.4.2 Physical characteristics This section defines physical interface connector. 6.10 Detail A 0.30 0.05 x 45 (5X) 0.40 0.05 X 45 (3X) CORING ALLOWED IN THIS AREA. 2.25 0.05...
Page 65 - Table 15 SAS pin descriptions
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 60 11.4.3 Connector requirements Contact the preferred connector manufacturer for mating part information. Part numbers for SAS connectors will be provided in a future revision of this publication when production parts are av...
Page 66 - SAS transmitters and receivers; IGNAL CHARACTERISTICS; Table 16 Ready LED Out conditions; LED; Ready LED Meaning bit mode page 19h; Table 17 LED drive signal
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 61 11.4.6 SAS transmitters and receivers A typical SAS differential copper transmitter and receiver pair is shown in Figure 20. The receiver is AC coupling to eliminate ground shift noise. Figure 20. SAS transmitters and rece...
Page 67 - LED o; Table 18 General interface characteristics
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 SAS P RODUCT M ANUAL , R EV . A 62 11.5.2 Differential signals The drive SAS differential signals comply with the intra-enclosure (internal connector) requirements of the SAS standard. Table 18 defines the general interface characteristics. 11.6 SAS-3 S PEC...
Page 68 - Index; Numerics
Seagate Enterprise Capacity 3.5 HDD v4 SAS Product Manual, Rev. A 63 Index Numerics 12 volt pins 61 5 volt pins 61 A abort task set function 47 AC coupling 61 AC power requirements 20 ACA active status 57 ACA active, faulted initiator status 57 acoustics 34 active LED Out signal 61 actuator 9 assemb...
Page 69 - See
Seagate Enterprise Capacity 3.5 HDD v4 SAS Product Manual, Rev. A 64 DEK 38 description 7 DFE 62 dimensions 35 disk rotation speed 10 drive 34 drive characteristics 10 Drive Locking 38 drive mounting 35 , 46 drive select 60 dual port support 47 E electrical description of connector 60 signal charact...
Page 71 - See also
Seagate Enterprise Capacity 3.5 HDD v4 SAS Product Manual, Rev. A 66 protection of data at rest 38 Q queue tagging 57 R radio interference regulations 3 RAID Rebuild 8 Random number generator 38 RCD bit 11 read error rates 13 , 40 read errors 14 read/write data heads 10 ReadLockEnabled 38 receivers ...
Page 73 - Seagate Technology LLC
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA S...
