Page 2 - Revision history; © 2011 Seagate Technology LLC. All rights reserved.
Revision history © 2011 Seagate Technology LLC. All rights reserved. Publication number: 100625253, Rev. C January 2011 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus and SeaTools are either trad...
Page 3 - Contents
Momentus Thin Product Manual, Rev. C Gen-2 i Contents 1.0 Seagate Technology support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - ii
Page 5 - iii; List of Figures
Momentus Thin Product Manual, Rev. C Gen-2 iii List of Figures Figure 1. Typical +5V only startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Figure 2. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 7 - Seagate Technology support services; SEAGATE ONLINE SUPPORT and SERVICES
Momentus Thin Product Manual, Rev. C Gen-2 1 1.0 Seagate Technology support services SEAGATE ONLINE SUPPORT and SERVICES For information regarding products and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: Presales & Technical support Global Suppo...
Page 8 - Introduction; Standard models
2 Momentus Thin Product Manual, Rev. C Gen-2 2.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus ® Thin model drives: Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE...
Page 9 - • Authenticated firmware download; About the Serial ATA interface; any jumpers or other configuration options.
Momentus Thin Product Manual, Rev. C Gen-2 3 Momentus Thin Self-Encrypting Drive models have the following additional features: • Automatic data encryption/decryption• Controlled access• Random number generator• Drive locking• 16 independent data bands• Cryptographic erase of user data for a drive t...
Page 10 - the drive; Specification summary table; Drive specifications
4 Momentus Thin Product Manual, Rev. C Gen-2 3.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate all models. 3.1 Specif...
Page 12 - Formatted capacity; Bytes per physical sector; Default logical geometry; Cylinders; LBA mode; Physical organization; Models
6 Momentus Thin Product Manual, Rev. C Gen-2 3.2 Formatted capacity Formatted capacity* Guaranteed logical blocks (LBA) - 512 emulation Bytes per physical sector ST320LT007 - 9ZV142 ST320LT009 - 9WC142 ST320LT011 - 9ZVG42 ST320LT014 - 9YK142 625,142,448 4096 ST250LT007 - 9ZV14C ST250LT009 - 9WC14C S...
Page 13 - Recording and interface technology; K sector models; Physical characteristics; Seek time; Typical seek times; Read
Momentus Thin Product Manual, Rev. C Gen-2 7 3.5 Recording and interface technology 4K sector models Interface Serial ATA (SATA) Recording method Perpendicular Recording density BPI (bits/in avg) 1397k Track density TPI (tracks/in avg) 315k Areal density (Gb/in 2 avg) 425 Spindle speed (RPM) ( ± 0.2...
Page 14 - Power specifications; Power dissipation; Seek
8 Momentus Thin Product Manual, Rev. C Gen-2 3.8 Start/stop times Time to ready Typical Max @ 25 ° C Power-on to Ready (sec) 3.5 4.0 Standby to Ready (sec) 3.0 3.0 3.9 Power specifications The drive receives DC power (+5V) through a native SATA power connector. 3.9.1 Power consumption Power requirem...
Page 16 - Typical current profile; Figure 1. Typical +5V only startup and operation current profile; Deferred spinup
10 Momentus Thin Product Manual, Rev. C Gen-2 3.9.1.1 Typical current profile Figure 1. Typical +5V only startup and operation current profile 3.9.2 Deferred spinup Momentus Thin drives do not support the deferred spinup option. If you require this option, refer to the Momen-tus 5400.3 SATA Blade Se...
Page 18 - Environmental specifications
12 Momentus Thin Product Manual, Rev. C Gen-2 3.10 Environmental specifications 3.10.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Above 1000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 10...
Page 20 - Acoustics; Electromagnetic immunity; Performance seek; Radio frequency environments; Test
14 Momentus Thin Product Manual, Rev. C Gen-2 3.11 Acoustics Drive emission of sound is measured consistent with the ECMA-74 and its’ referenced standards. Testing is conducted at room temperature (approximately 25 ° C). Emission levels are reported as the total A-weighted sound power levels for ste...
Page 21 - Reliability; Measurement type; Nonrecoverable read errors; Agency certification; Safety certification; • Certificate number:
Momentus Thin Product Manual, Rev. C Gen-2 15 3.13 Reliability Measurement type Specification Nonrecoverable read errors 1 per 10 14 bits read, max Annualized Failure Rate (AFR) <0.50% Load/Unload (U/UL) 25°C, 50% relative humidity 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10% r...
Page 22 - • Reorient the receiving antenna.
16 Momentus Thin Product Manual, Rev. C Gen-2 Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA). 3...
Page 23 - Environmental protection; European Union Restriction of Hazardous Substances (RoHS); Corrosive environment; 表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国; 表示该部件(于同类物品程度上)所含的危险和有毒物质超出中国
Momentus Thin Product Manual, Rev. C Gen-2 17 3.15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 3.15.1 European Union Restriction of Hazardous Substances (RoHS) The Europe...
Page 24 - Configuring and mounting the drive; Handling and static-discharge precautions; • Handle the drive only by its edges or frame.; Configuring the drive; Figure 2. Serial ATA connectors
18 Momentus Thin Product Manual, Rev. C Gen-2 4.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 4.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to p...
Page 25 - Serial ATA cables and connectors; Figure 3. Attaching SATA cabling; Drive mounting; • Use only M3 UNC mounting screws.; Non-operating with no hard errors
Momentus Thin Product Manual, Rev. C Gen-2 19 4.3 Serial ATA cables and connectors The Serial ATA interface cable consists of four conductors in two differential pairs, plus three ground connec-tions. The cable size may be 30 to 26 AWG with a maximum length of one meter (39.37 inches). See Table 7fo...
Page 26 - Measurements shown in Figures 4 and 5 are in inches.
20 Momentus Thin Product Manual, Rev. C Gen-2 Measurements shown in Figures 4 and 5 are in inches. Figure 4. Mounting dimensions (for FIPS 140-2 models) — top, side and end view Warning: FIPS 140-2 Models Contain 3 Tamper Evident Stickers with the marking "Tamper Indicator - Do Not Remove". ...
Page 28 - About FIPS; Purpose; Figure 6. Example of FIPS tamper evidence labels.
22 Momentus Thin Product Manual, Rev. C Gen-2 5.0 About FIPS The Federal Information Processing Standard (FIPS) Publication 140-2, FIPS PUB 140-2, is a U.S. govern-ment computer security standard used to accredit cryptographic modules. It is titled “Security Requirements for Cryptographic Modules”. ...
Page 29 - May not represent actual drive.
Momentus Thin Product Manual, Rev. C Gen-2 23 Note. May not represent actual drive.
Page 30 - Serial ATA connector pin definitions; Segment; Key and spacing separate signal and power segments
24 Momentus Thin Product Manual, Rev. C Gen-2 6.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also suppor...
Page 32 - Supported ATA commands; See
26 Momentus Thin Product Manual, Rev. C Gen-2 6.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification . See “S.M.A.R.T. comman...
Page 34 - Identify Device command; The Identify Device command (command code EC
28 Momentus Thin Product Manual, Rev. C Gen-2 6.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table on page 2...
Page 41 - Index
Momentus Thin Product Manual, Rev. C Gen-2 35 Index A ACA 16 acoustics 5 , 14 Active mode 11 Address 26 AFR 15 Agency certification 15 Altitude 12 Altitude, nonoperating 5 Altitude, operating 5 Ambient temperature 5 , 12 ambient temperature 7 Annualized Failure Rate 15 Annualized Failure Rate (AFR) ...
