Page 2 - Revision history; © 2011 Seagate Technology LLC. All rights reserved.
Revision history © 2011 Seagate Technology LLC. All rights reserved. Publication number: 100516232, Rev. G, February 2011 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Constellation ES and SeaTools are e...
Page 3 - Constellation ES Serial ATA Product Manual, Rev. G; Contents
Constellation ES Serial ATA Product Manual, Rev. G i Contents 1.0 Seagate Technology support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - List of Figures
Constellation ES Serial ATA Product Manual, Rev. G iii List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . ....
Page 7 - Seagate Technology support services; SEAGATE ONLINE SUPPORT and SERVICES
Constellation ES Serial ATA Product Manual, Rev. G 1 1.0 Seagate Technology support services SEAGATE ONLINE SUPPORT and SERVICES For information regarding products and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: Presales & Technical support Glob...
Page 8 - Introduction
2 Constellation ES Serial ATA Product Manual, Rev. G 2.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Constellation ® ES Serial ATA model drives: These drives provide the following key features: • 7200 RPM spindle speed. • Power...
Page 9 - About the Serial ATA interface; ers or other configuration options.
Constellation ES Serial ATA Product Manual, Rev. G 3 2.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It i...
Page 10 - Drive specifications; the drive; Specification summary tables
4 Constellation ES Serial ATA Product Manual, Rev. G 3.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following ...
Page 12 - Formatted capacity; Default logical geometry; LBA mode; Recording and interface technology; Interface
6 Constellation ES Serial ATA Product Manual, Rev. G 3.2 Formatted capacity Model Formatted capacity* Guaranteed sectors Bytes per sector ST32000644NS 2TB 3,907,029,168 512 ST31000524NS 1TB 1,953,525,168 ST3500514NS 500GB 976,773,168 *One GB equals one billion bytes when referring to hard drive capa...
Page 13 - Physical characteristics; Cache buffer; Seek time; Read; Average; TB models
Constellation ES Serial ATA Product Manual, Rev. G 7 3.5 Physical characteristics weight: (maximum) ST32000644NS 710g (1.565 lb) ST31000524NS 640g (1.411 lb) ST3500514NS 610g (1.345 lb) Cache buffer ST32000644NS ST31000524NS and ST3500514NS 64MB (64,768KB) 32MB (32,768KB) 3.6 Seek time Seek measurem...
Page 14 - Power specifications
8 Constellation ES Serial ATA Product Manual, Rev. G 3.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 4 on page 26. 3.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measureme...
Page 15 - DC power requirements
Constellation ES Serial ATA Product Manual, Rev. G 9 Table 2: 2000GB Drive DC power requirements 1.5Gb mode 3.0Gb mode Voltage +5V +12V Power +5V +12V Power Regulation ±5% ±5% (Watts) ±5% ±5% (Watts) Avg Idle Current * 0.26 0.42 6.38 0.27 0.42 6.39 Advanced Idle Current * Idle_A 0.13 0.35 4.83 0.14 ...
Page 18 - Typical current profiles
12 Constellation ES Serial ATA Product Manual, Rev. G 3.8.1.1 Typical current profiles
Page 19 - Conducted noise; injected noise at up to 10MHz.; Voltage tolerance
Constellation ES Serial ATA Product Manual, Rev. G 13 Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile 3.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load...
Page 21 - Extended Power Conditions - PowerChoice; PowerChoice is invoked using one of two methods; Power Condition Name; Reduced electronics
Constellation ES Serial ATA Product Manual, Rev. G 15 3.8.4.1 Extended Power Conditions - PowerChoice TM Utilizing the load/unload architecture a programmable power management interface is provided to tailor sys-tems for reduced power consumption and performance requirements. The table below lists t...
Page 22 - PowerChoice Manufacture Default Power Condition Timer Values
16 Constellation ES Serial ATA Product Manual, Rev. G S.M.A.R.T. Read Data Reports • Attribute 192 - Emergency Retract Count • Attribute 193 - Load/Unload Cycle Count PowerChoice Manufacture Default Power Condition Timer Values Default power condition timer values have been established to assure pro...
Page 23 - Environmental limits; Temperature; Figure 3. HDA temperature checkpoint
Constellation ES Serial ATA Product Manual, Rev. G 17 3.9 Environmental limits Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C...
Page 25 - Vibration; * Rotary Random Operating Vibration; Nonoperating vibration; Acoustics; Fluid Dynamic Bearing (FDB) motor acoustics; Performance seek; Linear Random
Constellation ES Serial ATA Product Manual, Rev. G 19 3.9.5 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. 3.9.5.1 Operating vibration The maximum vibratio...
Page 26 - Electromagnetic immunity; Radio frequency environments; Test; 0% AM with 1 kHz sine
20 Constellation ES Serial ATA Product Manual, Rev. G 3.11 Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (origi...
Page 27 - Reliability; • Operations at nominal voltages.; Nonrecoverable read errors
Constellation ES Serial ATA Product Manual, Rev. G 21 3.13 Reliability 3.13.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) The product shall achieve an Annualized Failure Rate (AFR) of 0.73% (MTBF of 1.2 million hours) when oper-ated nominal power and typical case temperatures...
Page 28 - Agency certification; Safety certification; • Family name: Constellation ES; FCC verification
22 Constellation ES Serial ATA Product Manual, Rev. G 3.14 Agency certification 3.14.1 Safety certification These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency. 3.14.2 Electromagnetic compatibility Hard drives that display...
Page 29 - Environmental protection; China Restriction of Hazardous Substances (RoHS) Directive; 表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国
Constellation ES Serial ATA Product Manual, Rev. G 23 equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures: • Reorient the receiving antenna. • Move the device...
Page 30 - Corrosive environment
24 Constellation ES Serial ATA Product Manual, Rev. G 3.16 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B84...
Page 31 - Configuring and mounting the drive; Handling and static-discharge precautions; • Handle the drive by its edges or frame
Constellation ES Serial ATA Product Manual, Rev. G 25 4.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 4.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be expo...
Page 32 - Configuring the drive; Figure 4. Attaching SATA cabling
26 Constellation ES Serial ATA Product Manual, Rev. G 4.2 Configuring the drive Each drive on the Serial ATA interface connects point-to-point with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relationship. If two dr...
Page 33 - Drive mounting; Figure 5. Mounting dimensions—top, side and end view
Constellation ES Serial ATA Product Manual, Rev. G 27 4.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precau-tions when ...
Page 34 - Hot-Plug compatibility; The drive motor must come to a complete stop
28 Constellation ES Serial ATA Product Manual, Rev. G 5.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. For detailed ...
Page 35 - Serial ATA device plug connector pin definitions; • the ground pins P4 and P12.; Serial ATA connector pin definitions
Constellation ES Serial ATA Product Manual, Rev. G 29 5.2 Serial ATA device plug connector pin definitions Table 7 summarizes the signals on the Serial ATA interface and power connectors. Notes: 1. All pins are in a single row, with a 1.27mm (0.050”) pitch. 2. The comments on the mating sequence app...
Page 36 - See; Supported ATA commands; Command name
30 Constellation ES Serial ATA Product Manual, Rev. G 5.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification . See “S.M.A.R.T...
Page 38 - Identify Device command; The Identify Device command (command code EC; xxxx
32 Constellation ES Serial ATA Product Manual, Rev. G 5.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 8 on ...
Page 39 - xx; Word
Constellation ES Serial ATA Product Manual, Rev. G 33 60–61 Total number of user-addressable LBA sectors available(see Section 3.2 for related information)*Note: The maximum value allowed in this field is: 0FFFFFFFh (268,435,455 sectors, 137GB). Drives with capacities over 137GB will have 0FFFFFFFh ...
Page 40 - Bit
34 Constellation ES Serial ATA Product Manual, Rev. G Note. See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. 108–111 The mandatory value of the world wide name (WWN) for the drive. NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN suppor...
Page 42 - Set Features command
36 Constellation ES Serial ATA Product Manual, Rev. G 5.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter-ru...
Page 45 - Index
Constellation ES Serial ATA Product Manual, Rev. G 39 Index A ACA 22 acoustics 19 Active 14 Active mode 14 actuator arm 8 Agency certification 22 altitude 18 ambient 17 ambient temperature 7 , 8 Annualized Failure Rate (AFR) 21 areal density 2 , 6 ATA commands 30 Australia/New Zealand Standard AS/NZ...
Page 50 - Seagate Technology LLC
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100516232, Rev. G
