Page 2 - Index
Page 2 Index 1. Welcome 3 2. Important Safety Information 4 Before Installation 5 Product Use 6 Electrical Cord 6 3. Description 7 Rangehood 7 4. Cleaning & Maintenance 8 Cleaning the Interior 8 Cleaning the Exterior 8 Filters 9 Replacing the LED Strip Light 10 5. Installation 11 Rangehood Size ...
Page 3 - Welcome; Your State Regulatory Authority
Page 3 1. Welcome Thank you for purchasing your new Schweigen rangehood. To get the maximum output from this unit, please read through this guide before use. The guide contains important information on the use and maintenance of the unit, as well as important safety notes. This will ensure your pers...
Page 4 - Important Safety Information; WARNING
Page 4 2. Important Safety Information WARNING Please read this section thoroughly before attempting to operate the appliance. Inspect your product upon receipt. Any damage or defects MUST be reported within 48 hours, or no claim will be recognised. DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAG...
Page 5 - Before Installation
Page 5 2. Important Safety Information Before Installation 1. We recommend this appliance be installed or repaired by an experienced Home Appliances technician. 2. Please see our website www.schweigen.com.au for experienced installers. 3. It is dangerous to modify any part of this appliance. Modific...
Page 6 - Product Use; Electrical Cord
Page 6 2. Important Safety Information Product Use This product is designed for household use and should not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take particular care not to allow the oil or grease in...
Page 7 - Description; Rangehood
Page 7 3. Description Rangehood 1. 200mm outlet 2. Twin Side Ports 3. P.A. Filter Cover Panel 4. Filters 5. 2x Side adaptors 6. 2x Rectangle to round adators NOTE: Filter and light quantity may vary from model to model. 1 2 3 4 5 6
Page 8 - Cleaning & Maintenance; Cleaning the Interior; OK; Warning
_n_. _LH Section_ Page 8 4. Cleaning & Maintenance Cleaning the Interior Clean the interior of the rangehood with a damp cloth and a neutral detergent or denatured alcohol. NOTE: Do not use denatured alcohol on the exterior of the rangehood. Do not clean the electric parts or the motor with liqu...
Page 9 - Filters
_n_. _RH Section_ Page 9 4. Cleaning & Maintenance Filters For this appliance to function effectively, regular maintenance is a must. • The function of the filter is to absorb the grease particles given off during cooking.• Clogged filters and heavy oil deposits restrict airflow and may cause th...
Page 10 - Danger
Page 10 4. Cleaning & Maintenance Danger Always switch off and disconnect the power cord before replacing any light bulbs. Failure to do so may cause serious injury. Please be aware that the light bulb will retain heat for a short period of time after being switched off. Never attempt to replace...
Page 11 - Installation; Rangehood Size vs Cooktop Size
_n_. _RH Section_ Page 11 5. Installation Rangehood Size vs Cooktop Size In addition to the size, the height of the rangehood above the cooktop is important to obtain the best performance. INADEQUATE Rangehood smaller than cooking zone ADEQUATE Rangehood same size as cooking zone OPTIMAL Rangehood l...
Page 12 - In addition to the information in this manual,
_n_. _LH Section_ Page 12 5. Installation MINIMUM 1200mm Optimal 1500mm MAXIMUM 1800mm 900mm * Important: In addition to the information in this manual, please check all relevant state requirements for minimum– maximum heights, as well as regulations regarding the expelling of air. Schweigen is not ...
Page 13 - DANGER
_n_. _RH Section_ Page 13 5. Installation DANGER Always switch off and disconnect the power supply before installing the rangehood. Failure to do so may cause serious injury. WARNING Please remove filters before installation. Failure to do so may damage the clips. Ceiling Cassette Installation Guide...
Page 16 - Single Isodrive
Page 16 5. Installation Single Isodrive ® Motor Installation 1. Isodrive ® Motor 2. Roof Seal Kit (Dektite) (Not supplied)* 3. Support Straps (Not supplied)* 4. Attach Duct to Bell-Mouth Adaptor using ring clamp. Please DO NOT rip the ducting. 5. Isodrive ® Motor Power Lead (Plug) 6. Switch to Isodr...
Page 17 - Twin Isodrive
_n_. _RH Section_ Page 17 5. Installation 8 9 LIGHT MOTOR Twin Isodrive ® Motor Installation 1. Isodrive ® Motors 2. Roof Seal Kit (Dektite) (Not supplied)* 3. Support Straps (Not supplied)* 4. Attach Duct to Bell-Mouth Adaptor using ring clamp. Please DO NOT rip the ducting. 5. Isodrive ® Motor Pow...
Page 18 - Ducting
Page 18 5. Installation Ducting Please DO NOT crush or kink the ducting. 1. Crushed or kinked ducting creates sharp corners that creates turbulence. This reduces the size and efficiency of the ducting, lowers extraction and may cause excessive noise. 2. Sweeping curves and taut ducting reduces resis...
Page 19 - Condensation Information; Cooking with Induction Cooktops
_n_. _RH Section_ Page 19 6. Condensation Information Cooking with Induction Cooktops Cooking with an induction or similar cooktop, may produce condensation on the rangehood. Unlike basic electric or gas cooking, induction cooktops heat food and liquid instantly, which in turn, produces vapours rapi...
Page 20 - Troubleshooting; IMPORTANT
_n_. _LH Section_ Page 20 7. Troubleshooting Before you contact the technical service department, make sure that the product is plugged in and power is supplied. • Do not take any action that will damage the product. Check electric c onnection. V oltage o f the electric ne tw ork should be be tw een...
Page 21 - Faulty Installation
_n_. _RH Section_ Page 21 7. Troubleshooting Faulty Installation It is not the responsibility of Schweigen to rectify any incorrect installations. A service call out fee will be charged for any Schweigen technician that attends a call, whereby it is established that the fault is due to an incorrect ...
Page 22 - Specifications; Dimensions
_n_. _LH Section_ Page 22 8. Specifications Dimensions 1200 1155 700 655 18 0 18 0 655700 52 Technical Specifications Model SCC1200-S / SCC1200B-S / SCC1200W-S Feeding Voltage 220-240V 50Hz Light Power – LED Strip (W) 3 x 10.5W
Page 23 - Disclaimer
_n_. _RH Section_ Page 23 9. Disclaimer Disclaimer Under our policy of continuous product development, product specifications may change without notice. Prospective purchasers should therefore check with the retailer to ensure this publication correctly describes the products being offered for sale....