Page 2 - Index
Page 2 Index 1. Welcome ____________________________________________________________________________________________________ 3 2. Your Safety Warning ______________________________________________________________________________________________________ 4 Before Installation _________________________...
Page 4 - WARNING
Page 4 2. Your Safety WARNING Please read this section thoroughly before attempting to operate the appliance. Inspect your product upon receipt. Any damage or defects MUST be reported within 48 hours, or no claim will be recognised. DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAGED. If this produ...
Page 5 - Before Installation
Page 5 2. Your Safety Before Installation 1. We recommend this appliance be installed or repaired by a qualified Schweigen Home Appliances technician. 2. Please see our website www.schweigen.com.au for recommended installers. 3. It is dangerous to modify any part of this appliance. Modification of a...
Page 6 - Product Use; Maintenance and Service
Page 6 2. Your Safety Product Use This product is designed for household use and should not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take particular care not to allow the oil or grease in the pan to catch...
Page 7 - For Users; For Installers and Users
Page 7 3. Tips & Suggestions OPTIMAL Rangehood bigger than the cooking area. ADEQUATE Rangehood equal to the cooking area. INADEQUATE Rangehood smaller than the cooking area. The Rangehood has one mode of operation: Air extraction: The air is drawn in and cleaned by the grease filters and direct...
Page 9 - Control Panel; Cleaning periods of metal filters — “C” Signal
Page 9 5. Operation Control Panel Schweigen silent rangehoods are recognised for their silent operation. Although this holds true for all of our rangehoods with external motors, one must note that the rangehoods are silent when they are used for regular cooking on the lower fan setting. Therefore, y...
Page 10 - Surfaces
Page 10 6. Cleaning & Maintenance WARNING Always switch off and disconnect power before cleaning. Surfaces Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance, Always make sure to dry the appliance after ...
Page 11 - Cleaning the Interior
Page 11 6. Cleaning & Maintenance WARNING • If the grease filters are very dirty, the motor will extract only a small quantity of air, which reduces its efficiency; • The grease deposits that build up on the filter are highly flammable and COULD EASILY CATCH FIRE. • The manufacturer is exonerate...
Page 13 - Replacing the GU10 Light Bulb; DANGER
Page 13 6. Cleaning & Maintenance Replacing the GU10 Light Bulb Step 2 Gently push light holder down, turn light bulb anti-clockwise, pull the light bulb down and remove it from the light holder. Step 3 Gently push light holder down. Insert a new light bulb by lining up the pins of the light bul...
Page 15 - Island Mount Installation
Page 15 7. Installation 1. Fix the mounting bracket to the ceiling. Please ensure that the round space “O” is facing front. NOTE: Mounting bracket should be secured to the timber frame in the ceiling. 2. Attach aluminium flexi duct to the outlet on the rangehood and screw the four corner pieces to t...
Page 18 - Condensation Information
Page 18 8. Maintenance Condensation Information The induction cooktop is designed to provide rapid heating, improved thermal efficiency and greater heat consistency. For some customers with an induction cooktop, condensation can form on their rangehood filters while using their cooktop. The inductio...
Page 20 - Troubleshooting; Technical Specifications
Page 20 8. Maintenance Troubleshooting If the product does not work: Before you contact the technical service department, make sure that the product is plugged in, the electric fuse (on selected models) is in correctly and electric wiring is connected. (Fuses can be purchased from your local electri...
Page 21 - Faulty Installation
Page 21 8. Maintenance Calling the Technical Assistance Service Hotline In the event that the failure is not due to the faults mentioned in Trouble Shooting, contact the Technical Service 1300 829 066. A service request will require the following information:• The purchase date• The rangehood model ...
Page 24 - HOME APPLIANCES; schweigen
HOME APPLIANCES Distributed by: Unit 102/45 Gilby Road, Mt Waverley 3149 Victoria. 1300 881 693 (EST) www. schweigen .com.au