Page 2 - Index
Page 2 Index 1. Welcome 3 Your State Regulatory Authority 3 2. Important Safety Information 4 Before Installation 5 Product Use 6 Electrical Cord 6 3. Description 7 Rangehood 7 4. Operation 8 Touch Button Control Panel 8 Speed Control 8 Remote Control and Buttons 9 Cleaning periods of metal filters ...
Page 3 - Welcome; Your State Regulatory Authority
Page 3 1. Welcome Thank you for purchasing your new Schweigen rangehood. To get the maximum output from this unit, please read through this guide before use. The guide contains important information on the use and maintenance of the unit, as well as important safety notes. This will ensure your pers...
Page 4 - Important Safety Information; WARNING
Page 4 2. Important Safety Information WARNING Please read this section thoroughly before attempting to operate the appliance. Inspect your product upon receipt. Any damage or defects MUST be reported within 48 hours, or no claim will be recognised. DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAG...
Page 5 - Before Installation
Page 5 2. Important Safety Information Before Installation 1. We recommend this appliance be installed or repaired by experienced installers. 2. Please see our website www.schweigen.com.au for experienced installers. 3. It is dangerous to modify any part of this appliance. Modification of any kind, ...
Page 6 - Product Use; Electrical Cord
Page 6 2. Important Safety Information Product Use This product is designed for household use and should not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take particular care not to allow the oil or grease in...
Page 7 - Description; Rangehood
Page 7 3. Description Rangehood 1. Flue Wall Mounting Bracket 2. Extension Flue Piece 3. Main Flue 4. Socket lead for Isodrive ® motor 5. Main Power Cord 6. Single Outlet 200mm 7. Filter 8. Screw Pack 9. Remote NOTE: Filter and light quantity may vary from model to model. Important Electronics MUST ...
Page 8 - Operation; Touch Button Control Panel; Speed Control
Page 8 4. Operation Schweigen silent rangehoods are recognised for their silent operation. Although this holds true for all of our rangehoods with external motors, one must note that the rangehoods are silent when they are used for regular cooking on the lower fan setting. Therefore, you will only h...
Page 9 - Remote Control and Buttons
Page 9 4. Operation 2 3 4 1 Remote Control and Buttons 1. On/Off: Use this button for activating and deactivating the motor. 2. Speed + : The motor speed will be increased to the level above. (Maximum level is 5) 3. Speed — : The motor speed will be decreased to the next level down. (Minimum level i...
Page 10 - OK; Warning; Cleaning & Maintenance
Page 10 Cleaning the Interior Clean the interior of the rangehood with a damp cloth and a neutral detergent. NOTE: Do not use denatured alcohol on the exterior of the rangehood. Do not clean the electric parts or the motor with liquids or solvents Cleaning the Exterior We recommended using a soft cl...
Page 11 - Filters
Page 11 5. Cleaning & Maintenance Filters For this appliance to function effectively, regular maintenance is a must. • The function of the filter is to absorb the grease particles given off during cooking.• Clogged filters and heavy oil deposits restrict airflow and may cause the motor to overhe...
Page 12 - Installation; Rangehood Size vs Cooktop Size
Page 12 6. Installation Rangehood Size vs Cooktop Size In addition to the size, the height of the rangehood above the cooktop is important to obtain the best performance. INADEQUATE Rangehood smaller than cooking zone ADEQUATE Rangehood same size as cooking zone OPTIMAL Rangehood larger than cooking...
Page 13 - Mounting Instructions; In addition to the information in this manual,
Page 13 6. Installation Mounting Instructions It is STRONGLY RECOMMENDED that the rangehood be installed centrally over the cooktop. This will greatly improve its performance. Minimum height from the hob top surface to the underside face of the rangehood:• 650mm electric cooktop• 650mm gas cooktop A...
Page 14 - Wall Mount Installation; DANGER
Page 14 6. Installation Wall Mount Installation There are two primary mounting points and several secondary mounting points to firmly fix the rangehood in place. Suitable fixing screws must be used to mount the appliance on a secure surface. Please ensure that the holes for the two primary mounting ...
Page 15 - Installation Example
Page 15 6. Installation Step 1 There are 2 L-shaped suspension plates ( 2 ) to suspend the appliance to the wall. These plates are supplied with a screw set for ease of installation. Secure rangehood to the wall using only primary mounting points ( 1 ). Check the level of the rangehood and adjust ac...
Page 16 - IMPORTANT
Page 16 Ducting Please DO NOT crush or kink the ducting. 1. Crushed or kinked ducting creates sharp corners that creates turbulence. This reduces the size and efficiency of the ducting, lowers extraction and may cause excessive noise. 2. Sweeping curves and taut ducting reduces resistance and turbul...
Page 17 - System Overview
Page 17 6. Installation System Overview 1. Isodrive ® Motor 2. Roof Seal Kit (Dektite) (Not supplied)* 3. Support Straps (Not supplied)* 4. Attach Duct to Bell-Mouth Adaptor using ring clamp. Please DO NOT rip the ducting. 5. Isodrive ® Motor Power Lead (Plug) 6. Rangehood to Isodrive ® Motor Lead (...
Page 18 - Condensation Information; Cooking with Induction Cooktops
Page 18 7. Condensation Information Cooking with Induction Cooktops Cooking with an induction or similar cooktop, may produce condensation on the rangehood. Unlike basic electric or gas cooking, induction cooktops heat food and liquid instantly, which in turn, produces vapours rapidly. Because of th...
Page 19 - Troubleshooting
Page 19 8. Troubleshooting Troubleshooting Before you contact the technical service department, make sure that the product is plugged in and power is supplied. • Do not take any action that will damage the product. Check electric c onnection. V oltage o f the electric ne tw ork should be be tw een 2...
Page 20 - Faulty Installation
Page 20 8. Troubleshooting Faulty Installation It is not the responsibility of Schweigen to rectify any incorrect installations. A service call out fee will be charged for any Schweigen technician that attends a call, whereby it is established that the fault is due to an incorrect installation or no...
Page 21 - Specifications; Technical Specifications; Dimensions
Page 21 9. Specifications Technical Specifications Model DS3326-9S / DS3326B-9S Feeding Voltage 220-240V 50Hz Lamp Power – LED (W) 4 x 1.2W Dimensions 250 260 600 600 120 60 500 900 Min 650 Max 1130
Page 22 - Disclaimer
Page 22 10. Disclaimer Disclaimer Under our policy of continuous product development, product specifications may change without notice. Prospective purchasers should therefore check with the retailer to ensure this publication correctly describes the products being offered for sale. All information ...
Page 23 - Notes
