Page 2 - Index
Page 2 Index 1. Welcome 3 Your State Regulatory Authority 3 2. Important Safety Information 4 Before Installation 5 Product Use 6 Ducted or Recirculating? 6 Electrical Cord 6 3. Description 7 Rangehood 7 Cutout Size 7 4. Operation 8 Push Button Control Panel 8 Speed Control 8 5. Cleaning & Maint...
Page 3 - Welcome; Your State Regulatory Authority
Page 3 1. Welcome Thank you for purchasing your new Schweigen rangehood. To get the maximum output from this unit, please read through this guide before use. The guide contains important information on the use and maintenance of the unit, as well as important safety notes. This will ensure your pers...
Page 4 - Important Safety Information; WARNING
Page 4 2. Important Safety Information WARNING Please read this section thoroughly before attempting to operate the appliance. Inspect your product upon receipt. Any damage or defects MUST be reported within 48 hours, or no claim will be recognised. DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAG...
Page 5 - Before Installation
Page 5 2. Important Safety Information Before Installation 1. We recommend this appliance be installed or repaired by a qualified Schweigen Home Appliances technician. 2. Please see our website www.schweigen.com.au for recommended installers. 3. It is dangerous to modify any part of this appliance. ...
Page 6 - Product Use; Electrical Cord
Page 6 2. Important Safety Information Product Use This product is designed for household use and should not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take particular care not to allow the oil or grease in...
Page 7 - Description; Rangehood; Cutout Size
Page 7 3. Description Rangehood 1. For use with Isodrive ® motor system 2. Male plug (main power 240V) 3. Single 200mm outlet 4. Reducer (for Isodrive ® 650 only) 5. Baffles 6. Lights NOTE: Filter and light quantity may vary from model to model. 1 2 3 4 5 6 Important Electronics MUST be accessible f...
Page 8 - Operation; Push Button Control Panel; Speed Control
Page 8 4. Operation Schweigen silent rangehoods are recognised for their silent operation. Although this holds true for all of our rangehoods with external motors, one must note that the rangehoods are silent when they are used for regular cooking on the lower fan setting. Therefore, you will only h...
Page 9 - Cleaning & Maintenance; Cleaning the Interior; OK; Warning
Page 9 5. Cleaning & Maintenance Cleaning the Interior Clean the interior of the rangehood with a damp cloth and a neutral detergent or denatured alcohol. NOTE: Do not use denatured alcohol on the exterior of the rangehood. Do not clean the electric parts or the motor with liquids or solvents Cl...
Page 10 - Baffles
Page 10 5. Cleaning & Maintenance Endure the baffles are cool before removing, to ensure no oil is spilt. To remove, push away from you until the near edge clears the slot. Then carefully pull down and back to remove. To replace, perform the same operation but in reverse. Baffles For this applia...
Page 11 - Replacing the Lights
Page 11 5. Cleaning & Maintenance Replacing the Lights Danger Always switch off and disconnect power before replacing the lights. Failure to do so may cause serious injury. Please be aware that the light bulb may retain heat for a short period of time after being switched off. Step 2 Gently turn...
Page 12 - Installation; Rangehood Size vs Cooktop Size; Overhead cabinet Rangehood Installation position
Page 12 6. Installation Rangehood Size vs Cooktop Size In addition to the size, the height of the rangehood above the cooktop is important to obtain the best performance. INADEQUATE Rangehood smaller than cooking zone ADEQUATE Rangehood same size as cooking zone OPTIMAL Rangehood larger than cooking...
Page 13 - Mounting Instructions; In addition to the information in this manual,
Page 13 6. Installation Mounting Instructions It is STRONGLY RECOMMENDED that the rangehood be installed centrally over the cooktop. This will greatly improve its performance. Minimum height from the hob top surface to the underside face of the rangehood:• 600mm electric cooktop• 600mm gas cooktop A...
Page 14 - FRONT VIEW; Mounting Points for Body; DANGER
Page 14 6. Installation FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW Mounting Points for Body The diagrams below are a guide for all mounting points. Note: Please make sure all plastic protection on the rangehood and filters are removed before use. DANGER Always switch off and disconnect the power supp...
Page 15 - Installation Example
Page 15 6. Installation Installation Example NOTE Remove all plastic protection on the rangehood and filters before use. FRONT VIEW TOP VIEW BOTTOM VIEW SIDE VIEW SIDE VIEW FRONT VIEW TOP VIEW BOTTOM VIEW SIDE VIEW SIDE VIEW FRONT VIE W TOP VIE W BOTT OM VIEW SIDE VIEW SIDE VIEW FRONT VIE W TOP VIE ...
Page 16 - Ducting
Page 16 6. Installation Ducting Please DO NOT crush or kink the ducting. 1. Crushed or kinked ducting creates sharp corners that creates turbulence. This reduces the size and efficiency of the ducting, lowers extraction and may cause excessive noise. 2. Sweeping curves and taut ducting reduces resis...
Page 17 - Isodrive
Page 17 6. Installation Isodrive ® Motor Setup NOTE Please refer to the Isodrive ® motor installation guide for more details on flexi ducting and Isodrive ® motor installation.
Page 18 - System Overview
_n_. _LH Section_ Page 18 6. Installation System Overview 1. Isodrive ® Motor 2. Roof Seal Kit (Dektite) (Not supplied)* 3. Support Straps (Not supplied)* 4. Attach Flexi Duct to Bell-Mouth Adaptor using ring clamp. Please DO NOT rip the ducting. 5. Isodrive ® Motor Power Lead (Male Plug) 6. Rangeho...
Page 19 - Condensation Information; Cooking with Induction Cooktops
_n_. _RH Section_ Page 19 7. Condensation Information Cooking with Induction Cooktops Cooking with an induction or similar cooktop, may produce condensation on the rangehood. Unlike basic electric or gas cooking, induction cooktops heat food and liquid instantly, which in turn, produces vapours rapi...
Page 20 - Troubleshooting; IMPORTANT
_n_. _LH Section_ Page 20 8. Troubleshooting Troubleshooting Before you contact the technical service department, make sure that the product is plugged in and power is supplied. • Do not take any action that will damage the product. Check electric c onnection. V oltage o f the electric ne tw ork sho...
Page 21 - Faulty Installation
_n_. _RH Section_ Page 21 8. Troubleshooting Faulty Installation It is not the responsibility of Schweigen to rectify any incorrect installations. A service call out fee will be charged for any Schweigen technician that attends a call, whereby it is established that the fault is due to an incorrect ...
Page 22 - Specifications; Technical Specifications; Dimensions
_n_. _LH Section_ Page 22 9. Specifications Technical Specifications Model DA-UM950S Feeding Voltage 220-240V 50Hz Lamp Power – Halogen (W) 2 x 35W (Optional) Lamp Power – LED (W) 2 x 3.5W (Supplied) Dimensions Front Back to wall 197 30 360 825 864 295 260 360
Page 23 - Disclaimer
_n_. _RH Section_ Page 23 10. Disclaimer Disclaimer Under our policy of continuous product development, product specifications may change without notice. Prospective purchasers should therefore check with the retailer to ensure this publication correctly describes the products being offered for sale...
