SATO EAP-LEAP - Manual
SATO EAP-LEAP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Plug-In Interface Cards
www.satoamerica.com
All SATO Industrial Printers use Plug-In Interface
Cards for maximum flexibility. They can be easily
changed in the field in a matter of seconds to
accommodate any of the commonly used host
interfaces.
IEEE1284 - High-Speed Parallel
Connector:
Standard Centronics 36 Pin (Female)
Transmission Speed:
Up to 450k bytes per second
Port Type Compatibility:
ECP/Bi-Directional compatible
Printer Cable Type:
IEEE1284 Compliant Parallel
(Cable not included)
Max. Printer Cable Length:
10 feet (3 meters)
Serial Interfaces
RS232 - High-Speed
Connector:
Standard DB-25S (Female)
Settings via dip switch on the board:
Baud Rates: 9600, 19200, 38400, 57600
Communication Protocols:
Ready/Busy, Xon/Xoff, SATO Status 2, 3 and 4
Printer Cable Type:
NULL MODEM cable when connected to a
standard PC RS232C port. (Cable not included)
Max. Printer Cable Length:
50 feet at up to 19,200 baud rate. Determined by cable quality
and baud rate. Refer to the ANSI/EIA RS232C spec for more info
RS422/485
Connector:
2 Standard DB-9 (Female); Supports Multi-Drop of up to
32 printers
Settings via dip switch on the board:
Baud Rates: 2400, 4800, 9600, 19200
Parity: ODD, EVEN, NONE
Stop Bits: 1 or 2 / Data Bits: 7 to 8
Communication Protocols:
Ready/Busy, Xon/Xoff, SATO Status 3
Printer Cable Type:
RS422/485 Standard Cable
(Cable not included)
Max. Printer Cable Length:
3,900 Feet
USB*
Connector:
USB Type B
Transmission Speed:
1.5 Mbps
Printer Cable Type:
USB Type A Male to USB Type B Male
(Cable not included)
Max. Printer Cable Length:
10 feet (3 meters)
*Factory Installation Required
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
