Sanus VMTV - Manual
Sanus VMTV – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Supplied Parts and Hardware
- Page 3 – Avoid potential injuries or property damage! Do not; CauTION
- Page 4 – NOTE
- Page 5 – Avoid potential injuries or property damage!; Be sure the square shoulder of the bolt [11]; seats completely into the square hole before; Avoid potential injuries or property damage! Do
- Page 6 – Loosen the eight fasteners shown. Adjust the; platter so that the slots [A] are slightly wider than; the width of the monitor. Retighten the fasteners.
- Page 7 – HEAVY! You will need assistance; with this step. Have an assistant hold
Sanus Systems
2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 1-800-359-5520 • 651-484-7988
[email protected] • www.sanus.com
©2008 Milestone AV Technologies
VMTV
(6901-100175 <01>)
Thank you for choosing a Sanus Systems VMTV monitor mount. The VMTV monitor mount is designed to support
monitors 13 to 27 inches (33 to 68 cm); maximum weight capacity is 45 kg (100 lbs.). The VMTV monitor mounts are
adjustable, allowing up to 110˚ of swivel, up to 180˚ of roll, and three tilt settings 0˚, -5˚, and -10˚.
Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper assembly may cause
property damage or personal injury. If you do not understand these directions, or have doubts about the safety
of the assembly, contact Customer Service or call a qualified contractor. Sanus Systems is not responsible for
damage or injury caused by incorrect assembly or use.
CauTION
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from young children!
WaRNING
IMPORTaNT SaFETY INSTRuCTIONS - SaVE THESE INSTRuCTIONS
002555.eps
TWM - complete assembly
This product is designed for use in wood stud walls only! The wall must be capable of supporting up to five times
the weight of the monitor and mount combined. If you have any doubts about the ability of the wall to support
the monitor, contact Customer Service, or a qualified contractor.
CauTION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
6901-100175 <01> 7/32 in. Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Customer Service. Never use damaged parts! 002556.epsTVM - parts list [01] x 1 [02] x...
6901-100175 <01> 002557.epsTWM - Mount to wood stud 1 002557.epsTWM - Mount to wood stud 002557.epsTWM - Mount to wood stud 002557.epsTWM - Mount to wood stud 63.5 mm (2.5 in.) 7/32 in. [01] [09] [01] Avoid potential injuries or property damage! Do not overtighten the lag bolts [09]. Tighten t...
6901-100175 <01> 002558.epsTWM - Install Arm 2 002558.epsTWM - Install Arm [06] [08] Do not overtighten the pivot nut [12]. The arm [03] must be free to move. NOTE 002558.epsTWM - Install Arm [03] [10] [12] [02]
