Sanus LAS1A - Manual
Sanus LAS1A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Supplied Parts and Hardware
- Page 4 – : Cross Tube Installation; : Install Extension Tubes
- Page 6 – : attach Speaker Brackets
- Page 7 – - 1: attach Speakers using Threaded Fasteners
Sanus Systems
2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 1-800-359-5520 • [email protected] • www.sanus.com
LAS1A
(6901-100147 <01>)
Thank you for choosing the Sanus Systems LAS1A. The LAS1A is designed to mount speakers on each side of a
large VisionMount full motion TV mount. The LAS1A will support speakers weighing up to 11 kg (25 lbs.) each.
Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper installation may
cause property damage or personal injury. If you do not understand these directions, or have doubts about
the safety of the installation, contact Sanus Systems Customer Service or call a qualified contractor. Sanus
Systems is not liable for damage or injury caused by incorrect mounting, assembly, or use.
CauTION
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from young children!
warNINg
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
6901-100147 <01> 1/4-20 x 2.0 in. 1/4-20 x 3/8-16 1/4-20 x 3/8-16 M4 x 35mm 1/4-20 1/4-20 Nyloc 1/4-20 x 0.5 in. M4 x 16mm 1/4-20 x 0.75 in. M4 M6 M6 M4 M6 M4 1/4-20 x 1.5 in. 1/4-20 x 1.25 in. Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. I...
6901-100147 <01> 2: Cross Tube Installation Slide the cross tubes [ 02 ] into the first monitor bracket [ g ], through the arm assembly [ H ] and then through the second monitor bracket [ J ]. Center the cross tubes on the back of the TV. Using the Allen Key, tighten the six vise assemblies un...
6901-100147 <01> 6: attach Speaker Brackets Slide the speaker brackets [ 01 ] into the extension tubes [ 03 ]. Use the Allen key to tighten the four vise assemblies [ 04 ] until the speaker brackets do not slide on the extension tubes. [01] [03] [04] [03] [25] Maximum extension of the cross tu...
