Page 2 - Supplied Parts and Hardware; OPT
6901-100189 <01> Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts! This product contains small items tha...
Page 5 - : Remove Wall Plate from arm
6901-100189 <01> 1: Remove Wall Plate from arm The LA112 is shipped with the wall plate and arm assembled. You must remove the wall plate before installation. Loosen the two fasteners [a] securing the wall plate [01] to the arm assembly [02]. Tilt the wall plate away from the arm assembly then...
Page 6 - : Remove Mounting Brackets
6901-100189 <01> 2: Remove Mounting Brackets [27] P1 P3 TV SET X-ARM VCR DVD CBL SEL IN/OUT P R E S E T MENU EXIT P2 P4 P1 P3 TV SET X-ARM VCR DVD CBL SEL IN/OUT P R E S E T MENU EXIT P2 P4 [a] [03] [04] You must remove the two TV Mounting Brackets from the LA112 before attaching the arm to th...
Page 7 - For Wood Stud Walls
6901-100189 <01> 3: Mount Wall Plate For Wood Stud Walls Max. 43 cm (17 in.) Min. 6.5 cm (2.5 in.) 1/8 in. 6x 6x 6x 2x [01] [10]
Page 8 - For Concrete Block or Brick Walls
6901-100189 <01> For Concrete Block or Brick Walls 1/2 in. Min. 6.5 cm (2.5 in.) 6x 6x 6x 6x Avoid potential injuries and / or property damage! Never drill into the mortar between concrete blocks! CauTION [10] [01] [11]
Page 9 - : Install arm assembly to Wall Plate
6901-100189 <01> 4: Install arm assembly to Wall Plate Hang the arm assembly [02] over the top rail of the wall plate [01]. Be sure both hooks on the arm assembly engage with the rail. Align the arm assembly to the desired location on the wall plates. Secure the bottom of the arm assembly to t...
Page 10 - : Set the Monitor Width
6901-100189 <01> 5: Set the Monitor Width Avoid potential injuries and / or property damage! Do not use the monitor manufacturer’s “screen size”; you must measure the width of the monitor case, including any speakers attached to the sides. CauTION Set Measure monitor width, including any speak...
Page 11 - : Install Mounting Brackets
6901-100189 <01> 6: Install Mounting Brackets [12, 13, 14, 15, 16, 17] [18, 19, 20] [03] Top Circular holes and hook [21, 22, 23] If your television came with mounting bolts use those. If not, select bolts from those supplied with your LA112. Bolts selected must match the manufacturer’s recomm...
Page 12 - For Power Outlets Located Outside the Bellows
6901-100189 <01> 7: Route Cables For Power Outlets Located Outside the Bellows Route the AV cables [a] over the bottom cross bar, through one of the cable loops [B], then through the cable access port at the back of the arm assembly. Route the power cord [07] over the bottom cross bar, through...
Page 13 - For Power Outlets Located Inside the Bellows
6901-100189 <01> For Power Outlets Located Inside the Bellows [06] [08] Route the AV cables over the bottom cross bar, through the left cable loop [a], then through the cable access port at the bottom of the arm assembly. Route the power cord [08] over the bottom cross bar, through the opposit...
Page 14 - : Install Monitor to Wall Plate
6901-100189 <01> 8: Install Monitor to Wall Plate HEAVY! You will need assistance with this step. [27] Position the hooks at the top of the mounting brackets over the top cross bar [a]. Guide the bottom of the mounting brackets down and towards the arm assembly until the brackets engage with t...
Page 15 - Calibrate arm to the Monitor; Reset the La112 Home Position; adjust Monitor Position
6901-100189 <01> 9: Calibrate the arm Calibrate arm to the Monitor NOTE: LA112 must be calibrated to the TV to avoid hitting the wall. Reset the La112 Home Position 1. Turn the control box power switch to “Off ”. 2. While holding down the “Set” button, turn the control box power switch back on...
Page 17 - Programming the Preset Position Keys
6901-100189 <01> Programming the Preset Position Keys To avoid injury or property damage, confirm correct TV width is set before programming the Perset Positions. Do not come in contact with the LA112 while it is in motion. CauTION Remote Control P1 P3 VOL + CH TV SET X-ARM VCR DVD CBL SEL IN/...
Page 18 - Programming the Remote to Operate an Existing TV
6901-100189 <01> Remote Control P1 P3 VOL + CH TV SET X-ARM VCR DVD CBL SEL IN/OUT P R E S E T MENU EXIT MUTE FAV 1 2 3 4 5 6 7 8 9 0 P2 P4 + P1 P3 VOL + CH POWER TV SET X-ARM VCR DVD CBL SEL IN/OUT P R E S E T P R E S E T MENU EXIT MUTE FAV 1 2 3 4 5 6 7 8 9 0 P2 P4 + PIP SWAP OPEN/CLOSE POSI...
Page 19 - Programming Codes; TV Programming Codes
6901-100189 <01> TV Brand Code Numbers TV Brand Code Numbers Admiral 220 160 081 072 Emerson 245 155 154 143 096 076 051 048 047 043 028 005 004 001 Advent 231 Fisher 057 007 Aiwa 213 Fujitsu 244 Akai 146 001 Funai 245 043 028 Amark 143 Funai 245 043 028 Ampro 073 Futuretech 043 Amstrad 052 Ga...
Page 20 - TV Programming Codes, continued
6901-100189 <01> Programming Codes TV Programming Codes, continued TV Brand Code Numbers TV Brand Code Numbers Nad 025 015 Soundesign 043 028 004 003 NEC 056 040 024 019 016 001 SSS 043 004 Nikei 043 Supremacy 002 Olevia 045 Sylvania 249 245 240 229 226 211 164 160 127 064 063 060 059 003 Onki...
Page 21 - DVD Programming Codes
6901-100189 <01> DVD Brand Code Numbers DVD Brand Code Numbers Apex Digital 153 220 Nad 221 Broksonic 017 Onkyo 233 001 Cyberhome 165 020 004 Panasonic 234 228 167 152 149 Daewoo 193 171 Phillips 237 166 168 016 007 Denon 240 226 Pioneer 230 229 189 015 Emerson 158 150 148 Proceed 219 GE 243 2...
Page 22 - VCR Programming Codes
6901-100189 <01> Programming Codes VCR Programming Codes VCR Brand Code Numbers VCR Brand Code Numbers Aiwa 461 334 Magin 404 Akai 446 425 424 346 343 316 Magnavox 464 456 445 367 334 Ampro 372 Marantz 445 369 367 312 Anam 445 Marts 406 Audio Dynamics 343 339 312 Matsui 330 Bloksonic 429 337 M...
Page 23 - VCR Programming Codes, continued
6901-100189 <01> Programming Codes VCR Programming Codes, continued VCR Brand Code Numbers VCR Brand Code Numbers Salora 314 TEAC 343 339 334 Samsung 508 468 425 412 409 407 404 445 332 Technics 445 370 Sansui 435 348 343 Teknika 406 445 334 319 Santo 404 314 310 307 301 Thomas 334 Scott 431 4...
Page 24 - For Cable Boxes
6901-100189 <01> Brand Code Numbers Brand Code Numbers ABC 205 200 103 039 004 Novaplex 092 Amricast 099 NSC 038 Antronit 014 Oak 204 037 Archer 014 007 Panasonic 047 044 Bell South 099 Paragon 008 Centurion 092 Philips 095 085 020 017 Century 007 Pioneer 203 231 121 105 034 103 Citizen 007 Pr...
Page 25 - Power Switch
6901-100189 <01> 11: Troubleshooting X-arm™ Will Not Move If X-arm becomes unresponsive, first check to see what the LED display on the side of the X-arm control reads. Then choose a course of action based upon the code. “a1”, “a2”, or “a3” is displayed on control box Possible Causes: One of t...
Page 26 - Troubleshooting; continued
6901-100189 <01> Troubleshooting continued “C1”, “C2”, “C3” or “C4” is displayed on control box Normally X-arm™ will show the code associated with the TV mounted on it. 1. Check that the IR receiver is plugged into the side of the X-arm™ and that the IR Receiver eye is in direct line of sight ...
Page 27 - “HC” is displayed on control box; HC Error
6901-100189 <01> “HC” is displayed on control box Possible Causes: Person or object is obstructing the motion of the X-arm™.One of the large drive screws has dirt or something on it.The linkages are rubbing against something.A motor cable has a short. How to Correct: 1. Unplug X-arm™ from powe...
Page 28 - “H1”, “H2”, or “H3” is displayed on control box
6901-100189 <01> “H1”, “H2”, or “H3” is displayed on control box Possible Causes: A cable has become disconnected.A “stop” switch is faulty.There is dirty or debris in one of the switches. How to Correct: 1. Unplug X-arm™ from power. 2. Check that the TV and X-arm™ are not trapped against the ...
Page 29 - If Your TV Leans Forward at the Home Position
6901-100189 <01> If Your TV Leans Forward at the Home Position Troubleshooting continued Remove the TV from your LA112 yearly to check that no cords are interfering with moving parts. 1. Move the LA112 to the home position against the wall by pressing the “SEL-IN/OuT” button on the remote once...
Page 30 - Home automation Controls; Port
6901-100189 <01> CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every...
Page 31 - Warranty; Warranty Registration Card; Purchaser Information
6901-100189 <01> Sanus Systems and CLO warrants this product, under normal use, to be free from defects in material and workmanship for a period of one year from the date of original purchase. Sanus Systems and CLO will, upon their discretion, repair or replace such defective equipment within ...
