Samsung SNF-8010 - Manual

English _5 ● over view class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconne...

English _7 ● over view contentS oveRview 3 3 Important Safety Instructions 9 Product Features 10 Recommended PC Specifications 10 Recommended Micro SD/ SDHC/SDXC Memory Card Specifications 11 NAS recommended specs 11 What’s Included 13 At a Glance iNSTALLATioN & CoNNeCTioN 16 16 Installation 19 ...

overview 8_ overview SeTup SCReeN 57 57 Setup 57 Basic Setup 70 Video & Audio setup 79 Network Setup 88 Event Setup 93 NAS (Network Attached Storage) guide 107 System Setup 112 Viewing profile information AppeNDix 113 113 Specification 120 Product Overview 122 Troubleshooting 124 Open source lic...

English _9 ● over view proDuct featureS • fisheye lens This lens has 360˚ vision and it can record video panoramically. If you use Smart Viewer on your PC, you can view corrected video in real time. • Dustproof/waterproof (ip66) (Snf-8010vm) The dustproof and waterproof design makes you feel at ease...

overview 10_ overview recommenDeD pc SpecificationS • CPU : Chips sporting Intel Core i5 or higher ` Web Plug-in is optimized to SSE 4.1 Instruction Set. • Resolution : 2048X1536 pixels or higher (32 bit color) • RAM : 2GB or higher • Supported OS : Windows XP / VISTA / 7 / 8, MAC OS X 10.7 • Suppor...

English _11 ● over view naS recommenDeD SpecS • Recommended capacity : 200GB or higher is recommended. • Simultaneous access : One unit of NAS can accept a maximum of sixteen camera accesses. • For this camera, you are recommended to use a NAS with the following manufacturer’s specs. Recommended pro...

English _13 ● over view at a GLance appearance a b d c e f g <SNF-8010> a d c hf g <SNF-8010VM>

English _15 ● over view inside Item Description a Camera fixing hole Hole used for securing the camera onto a ceiling. b MIC The MIC is built into the camera. ` It is applicable only to the SNF-8010 model. c Fisheye lens This lens has 360˚ vision and it can record video panoramically. d Micro SD Mem...

16_ installation & connection installation & connection inStaLLation J ` This camera(SNF-8010VM) is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable f...

English _17 ● in St aLL ation & connection installing the camera on the ceiling or a wall 1. Select a location where you want to install the camera. 2. Insert the provided screw into the camera hole and turn it clockwise. 3. Using the L shaped wrench or drill bit, fasten the top cover in place i...

English _19 ● in St aLL ation & connection inSertinG/removinG a micro SD memory carD J ` Disconnect the power cable from the camera before inserting the Micro SD memory card. ` Do not insert the Micro SD memory card while it’s upside down by force. Otherwise, it may damage the Micro SD memory ca...

installation & connection 20_ installation & connection J ` Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released. ` Before removing your Micro SD memory card, turn off the camera or go to < Storage >, turn the device o...

English _21 ● in St aLL ation & connection connectinG witH otHer Device <SNF-8010> RJ-45 Power <SNF-8010VM> M12 Power

installation & connection 22_ installation & connection ethernet connection Connect the Ethernet cable to the local network or to the Internet. power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. J ` If both PoE and D...

English _23 ● in St aLL ation & connection making a connection using the m12-rJ45 conversion cable provided (Snf-8010vm) Connect the M12 male connector for the conversion cable to the groove of the M12 Female connector for your camera. powering and networking (Snf-8010vm) Connect a camera to a P...

installation & connection 24_ installation & connection power cable Specification for each model in case of Dc 12v input: Wire Type (AWG) #22 #20 #18 Cable Length (Max.) 24m 38m 60m network cable Specification Item Contents Remark Connector RJ45 Ethernet 10/100Base-T 10/100 Mbps Cable UTP Ca...

English _25 ● in St aLL ation & connection connecting to audio input/output 1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to. M ` As a microphone is built in, you can use the built-in microphone instead of an ext...

installation & connection 26_ installation & connection connecting to the i/o port box Connect the Alarm I/O cable to the corresponding port of the port box. • ALARM-IN : Used to connect the alarm input sensor. • ALARM-OUT : Used to connect the alarm output signal. • GND : Common terminal to...

English _27 ● in St aLL ation & connection to connect the external sensor Connect one strand of each signal line (2-strand) of the sensors to the [ aLarm in ] port, and connect the other strand to the [ GnD ] port. alarm in wiring Diagram to connect the alarm out If devices (e.g., flashing light...

28_ network connection and setup network connection and setup You can set up the network settings according to your network configurations. connectinG tHe camera DirectLy to LocaL area networKinG connecting to the camera from a local pc in the Lan 1. Launch an Internet browser on the local PC. 2. En...

English _29 ● networ K connection an D S etup connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe moDem 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the ...

30_ network connection and setup network connection and setup connectinG tHe camera DirectLy to a pppoe moDem 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the...

English _31 ● networ K connection an D S etup connectinG tHe camera to a BroaDBanD router witH tHe pppoe/caBLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. configuring the network settings of the local pc connected to a Broadband router Configuring the networ...

32_ network connection and setup network connection and setup ButtonS uSeD in ip inStaLLer Item Description a Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not cu...

English _33 ● networ K connection an D S etup Item Description g URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. h IPv4 Scans for cameras with the IPv4 setting. i IPv6 Scans f...

36_ network connection and setup network connection and setup auto network Setup Run < ip installer_v2.XX.exe > to display the camera search list. At the initial startup, both [ auto Set ] and [ manual Set ] will be grayed out. M ` For cameras found with the IPv6 setting, these buttons will be...

English _37 ● networ K connection an D S etup Dynamic ip Setup Dynamic ip environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If...

38_ network connection and setup network connection and setup port ranGe forwarD (port mappinG) Setup If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. manual port range fo...

English _39 ● networ K connection an D S etup Setting up port range forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J ` If you don't set properl...

40_ network connection and setup network connection and setup connectinG to tHe camera from a SHareD LocaL pc 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M ` Access...

English _41 ● weB viewer web viewer connectinG to tHe camera normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:ab...

42_ web viewer web viewer connecting via upnp 1. Run the client or operating system in support of the UPnP protocol. 2. Click the camera name for search. In the Windows operating system, click the camera name searched from the network menu. - The login window is displayed. connecting via Bonjour 1. ...

English _43 ● weB viewer paSSworD SettinG When you access the product for the first time, you must register the login password. When the “ password change ” window appears, enter the new password. J ` A new password should be eight to fifteen letters long and a combination of at least two of upperca...

44_ web viewer web viewer inStaLLinG Stw webviewer pLuGin If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1. When the monitoring page is accessed for the ...

46_ web viewer web viewer uSinG tHe Live Screen Item Description a Monitoring Move to the monitoring screen. b Playback Move to the screen where you can search for the video recording saved in your Micro SD memory card or NAS. c Setup Move to the Setup screen. d Profile access information You can re...

48_ web viewer web viewer to capture the snapshot 1. Click [ capture ( ) ] on the scene to capture. 2. When a captured video is saved, a notification message appears. When using Internet Explorer, the captured video is saved in My Computer / My Documents / Pictures. In Mac OS, it is saved in “~/Pict...

English _49 ● weB viewer to use microphone Click [ mic ( ) ] icon to activate the microphone. to control the ptZ 1. Press the [ ptZ ( ) ] tab. 2. Adjust the direction of the camera by controlling the cursor [ ] of the screen moving pad, or control the zoom or focus. M ` For further details on PTZ us...

50_ web viewer web viewer pLayinG tHe recorDeD viDeo M ` Before you can play the video, you must configure the record settings. For details on record settings, refer to “ Storage ”. (page 89) name of event search screen and its function Item Description a Search range setting Set the search date and...

English _51 ● weB viewer to play the content after searching by event 1. Click the [ playback ( ) ] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [ event search ] button. The search results will be dis...

52_ web viewer web viewer name of time search screen and its function Item Description a Time bar The section in the specific period is played by moving the time bar. b Search date setting Set the search date using the calendar. ` If there is data saved in your Micro SD memory card or NAS on the day...

English _53 ● weB viewer Item Description h Video information Time data of the replayed video is displayed on the screen. i Backup Set the desired date to make a backup copy of video data saved in your Micro SD memory card or NAS. ` Can be set as up to 5 minutes. to play after searching by time 1. C...

54_ web viewer web viewer 6. Move [ time bar ( ) ] to a desired time point of the video before playing it. The time containing a normal recoding file will be highlighted in blue; the time with the event recording will be highlighted in red. to back up the searched video 1. During playback, click [ ]...

English _55 ● weB viewer to play an avi file (1) micro SD memory card 1. Separate the Micro SD memory card from the camera. J ` Before separating the Micro SD memory card, set the < Device > to < Off > in the “ Setup  Event  Storage ” menu. 2. Insert the Micro SD memory card into the P...

English _57 ● Setup Screen Setup On the network, you can set up basic information on the camera, video and audio, network events and system. 1. In the Live screen, click [ Setup ( ) ]. 2. The Setup screen appears. J ` The setting page for preview video requires the STW web viewer plug-in to be insta...

user 1. From the Setup menu, select the < Basic ( ) > tab. 2. Click < user >. 3. Provide the necessary user information. • Administrator password change : Change the password for the administrator. J ` For the security purposes, you are recommended to use a combination of numbers, alphab...

setup screen 68_ setup screen To add the home position 1. Move to a desired start screen point and press [ ]. The point will be set to the home position. 2. Click [ ] in the home position. You will move to the predetermined home position. 3. When the camera is rebooted after setting, the screen is l...

English _69 ● Setup Screen To set a group The group function enables you to group various presets before calling them in sequence. Six groups can save a total of 128 presets each. 1. Select a group setting mode. 2. Press the [ ] button. Entered in the bottom list. 3. If you want to delete a preset a...

setup screen 70_ setup screen viDeo & auDio Setup video setup 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < video setup >. 3. Select a < video source > mode. • Flip : Turns the camera images upside down. • Mirror : Interchanges the left and the ri...

English _71 ● Setup Screen Dewarping mode Sets the camera position and give the information to the user program. 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < Dewarping mode >. 3. Set < camera mounting mode >. • Ceiling : Select this for ceiling- moun...

English _73 ● Setup Screen camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < camera setup >. 3. Configure the settings as necessary of : SSDR, White balanc...

networK Setup DDnS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. J ` You can use the DDNS service only if the internet is connected. 1. From the Setup menu, select the < network ( )...

registering with DDnS to register your product with the Samsung DDnS1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select < DDnS Service > - < my DDnS >. 3. Click [ proDuct reGiStration ]. 4. Enter the product ID. ` Y...

SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < network ( ) > tab. 2. Click < SSL >. 3. Select a secure connection system. ` To access the camera using HTTPS mode, you have to type the IP address for t...

QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < network ( ) > tab. 2. Click < QoS >. 3. Click the [ add ( ) ] button. The IP list will be created. 4. Enter an IP address to which you will apply QoS. M ` The default...

event Setup ftp / e-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < ftp / e-mail >. 3. Select < ftp configuration > or < e-...

motion detection Events of motion detection can be set to trigger event signal output. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < motion detection >. 3. Set whether or not to < enable >. 4. Set < Sensitivity >, < Size > and < area >. 5. Set w...

to use motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select < Sensitivity > tab to set the sensitivity level. You can set the sensor’s sensitivity to detect a motion out of the background from the monitoring video. J ` In a situation...

network disconnection When the network is physically disconnected, it is considered as an event to be saved. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < network disconnection >. 3. Set whether or not to < enable >. 4. Specify the activation time and activation ...

SyStem Setup product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < product information >. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. • Serial number : Product serial numbe...

viewinG profiLe information profile access You can check the profile information. 1. Click [ Status ( ) ] on the live screen. 2. The profile information screen is displayed. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec....

English _113 ● appen DiX Specification Items Description SNF-8010 SNF-8010VM Video Imaging Device 1/1.8” 6M PS CMOS (IMX178) Total Pixels 6M Effective Pixels 2560X2048 (5.2M) Scanning System Progressive Min. Illumination Color : 0.5 Lux (F2.5, 50IRE) Color : 0.2 Lux (F2.5, 30IRE) B/W : 0.05 Lux (F2....

appendix 120_ appendix proDuct overview Snf-8010 Unit : mm (inch) Ø 145.9 (5.74") 49.6 (1.95") 3- Ø 4.8 (1.2") HOLE 45.9 (1.81") Ø 127.8 (5.03") 10° 26.5 (1.04") 120° 120°

appendix 122_ appendix trouBLeSHootinG PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera ...

open Source LicenSe notification on tHe proDuct The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email ...

SALES NETWORK SAMSUNG TECHWIN CO., LTD. 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Fre...