Samsung SCX-5x30 - Manual

i Important Precautions and Safety Information When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock and injury to people: 1 Read and understand all instructions. 2 Use common sense whenever operating electrical appliances. 3 Follow ...

ii Mercury Safety LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung Power Saver This printer contains advanced energy conservation technology that reduces power c...

iii WARNING: FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company should notify the ...

1 .1 <Introduction> 1 Introduction Thank you for purchasing this Samsung multifunctional product. Your machine provides printing, copying, scanning, and faxing (SCX-5530FN only) functions. This chapter includes: • Special features • Printer overview • Understanding the Status LED • Finding mor...

1 .2 <Introduction> Printer overview These are the main components of your machine: Front view 1 ADF (automatic document feeder) 1 1. Automatic document feeder is used as ADF in this user’s guide. 10 tray 1 2 document width guides 11 optional tray 2 3 document input tray 12 multi-purpose tray ...

1 .3 <Introduction> Control panel overview ( SCX-5530FN ) 1 Speed buttons : Allows you to store frequently-dialed fax numbers and email addresses and enter them with the touch of a few buttons. 13 Back : Sends you back to the upper menu level. 2 Shift : Allows you to shift the speed buttons to...

1 .6 <Introduction> Selecting a location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close t...

2 .1 <System setup> 2 System setup This chapter gives you an overview of menus available on your machine and step-by-step instructions for setting up the machine’s systems. This chapter includes: • Menu overview • Changing the display language • Setting the date and time • Changing the default...

2 .2 <System setup> Changing the display language To change the language that appears on the control panel, follow these steps: 1 Press Menu until System Setup appears on the bottom line of the display and press OK . 2 Press OK when Machine Setup appears. 3 Press the Scroll buttons until Langu...

2 .3 <System setup> Setting sounds (SCX-5530FN only) You can control the following sounds:• Key Sound : Turns the key sound on or off. With this option set to On , a tone sounds each time a key is pressed. • Alarm Sound : Turns the alarm sound on or off. With this option set to On , an alarm t...

3 .1 <Software overview> 3 Software overview This chapter gives you an overview of the software that comes with your machine. Further details about installing and using the software are explained in the Software Section . This chapter includes: • Supplied software • Printer driver features • S...

3 .2 <Software overview> Printer driver features Your printer drivers support the following standard features:• Paper source selection• Paper size, orientation and media type• Number of copies In addition, you can use various special printing features. The following table shows a general overv...

4 .1 <Network setup> 4 Network setup This chapter gives you step-by-step instructions for setting up your machine for network connections. This chapter includes: • Introduction • Supported operating systems • Configuring TCP/IP • Configuring EtherTalk • Configuring IPX frame types • Setting Et...

5 .1 <Loading originals and print media> 5 Loading originals and print media This chapter introduces you to how to load originals and print media into your machine. This chapter includes: • Loading originals • Selecting print media • Loading paper • Setting the paper size and type • Selecting ...

5 .2 <Loading originals and print media> To load an original into the ADF: 1 Load the original face up into the ADF. Make sure that the bottom of the original stack matches the paper size marked on the document input tray. 2 Adjust the document width guides to the paper size. Note Dust on the ...

5 .3 <Loading originals and print media> Supported print media types and sizes Type Size Dimensions Weight 1 1. If media weight is over 90 g/m 2 ( 24 lb bond), use the multi-purpose tray. Capacity 2 2. Maximum capacity may differ depending on media weight, thickness, and environmental conditio...

5 .4 <Loading originals and print media> Media sizes supported in each mode Guidelines for selecting and storing print media When selecting or loading paper, envelopes, or other print materials, keep these guidelines in mind:• Always use print media that conform with the specifications listed ...

5 .5 <Loading originals and print media> Transparencies • To avoid damaging the machine, use only transparencies designed for use in laser printers. • Transparencies used in the machine must be able to withstand 180 °C, the machine’s fusing temperature. • Place them on a flat surface after rem...

5 .6 <Loading originals and print media> Loading paper in the tray 1 or optional tray 2 1 Pull open the paper tray and load paper. You can load letterhead with the design side face down. The top edge of the sheet with the logo should be placed at the front of the tray. 2 After loading paper, s...

5 .7 <Loading originals and print media> In the multi-purpose tray The multi-purpose tray can hold special sizes and types of print material, such as transparencies, postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored paper. To load paper in the...

5 .8 <Loading originals and print media> Tips on using the multi-purpose tray • Load only one size of print media at a time in the multi-purpose tray.• To prevent paper jams, do not add paper when there is still paper in the multi-purpose tray. This also applies to other types of print media. ...

5 .9 <Loading originals and print media> Printing to the rear cover Using the rear cover, paper comes out of the machine face up . Printing from the multi-purpose tray to the rear cover provides a straight paper path. Using the rear cover might improve the output quality with special print med...

6 .1 <Copying> 6 Copying This chapter gives you step-by-step instructions for copying documents. This chapter includes: • Selecting the paper tray • Copying • Changing the settings for each copy • Changing the default copy settings • Using special copy features • Copying on both sides of paper...

6 .2 <Copying> Reduced or enlarged copy By using the Reduce/Enlarge button, you can reduce or enlarge the size of a copied image from 25% to 400% when you copy original documents from the scanner glass, or from 25% to 100% from the ADF. To select from the predefined copy sizes: 1 Press Reduce/...

6 .3 <Copying> ID card copying Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-, Folio-, Executive-, B5-, A5-, or A6-sized paper. When you copy using this feature, the machine prints one side of the original on the upper half of the paper and the other side on the ...

6 .4 <Copying> Clone copying Erasing background images You can set the machine to print an image without its background. This copy feature removes the background color and can be helpful when copying an original containing color in the background, such as a newspaper or a catalog. 1 Press Copy...

7 .1 <Basic printing> 7 Basic printing This chapter explains common printing tasks. Printing a document Your machine allows you to print from various Windows, Macintosh 1 , or Linux applications. The exact steps for printing a document may vary depending on the application you use. For details...

8 .1 <Scanning> 8 Scanning Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer. Then you can fax or email the files, upload them to your website, or use them to create projects that you can print. This chapter includes: • Scanning b...

8 .2 <Scanning> Scanning using a network connection If you have connected your machine to a network and set up network parameters correctly, you can scan and send images over the network. Preparing for network scanning Before using your machine’s network scanning features, you need to configur...

8 .3 <Scanning> 4 Click Add . 5 Select the index number, from 1 to 20. 6 Enter a name in Alias for the Setup for the corresponding Server List entry. This name will be displayed on your machine. 7 Select IP Address or Host Name . 8 Enter the server address in dotted decimal notation or as a ho...

8 .4 <Scanning> Setting network scan timeout If the Network Scan program on your computer does not send a refresh request and does not scan a job within a specified timeout period, your machine cancels the scan job. You can change this timeout setting as needed. 1 Press Menu until System Setup...

8 .6 <Scanning> Note You can also click Import and obtain your address book from your computer. Configuring group email numbers 1 Enter your machine’s IP address as the URL in a browser and click Go to access the web site of your machine. 2 Click Machine Settings and Group Address Book . 3 Cli...

8 .7 <Scanning> Searching Address Book for an entry There are two ways to search for an address in memory. You can either scan from A to Z sequentially or search by entering the first letters of the name associated with the address. Searching sequentially through memory 1 If necessary, press S...

9 .1 <Faxing (SCX-5530FN only)> 9 Faxing (SCX-5530FN only) The fax feature is available only on the SCX-5530FN. This chapter gives you information about using your machine as a fax machine. This chapter includes: Sending a fax• Setting the fax header • Adjusting the document settings • Sending...

9 .2 <Faxing (SCX-5530FN only)> Recommended resolution settings for different original document types are described in the table below: Note The resolution setting is applied to the current fax job. To change the default setting, see page 10.2. Darkness You can select the default contrast mode...

9 .3 <Faxing (SCX-5530FN only)> Confirming a transmission When the last page of your original has been sent successfully, the machine beeps and returns to Standby mode. When something goes wrong while sending your fax, an error message appears on the display. For a list of error messages and t...

9 .5 <Faxing (SCX-5530FN only)> 5 Call your fax number from another telephone. It is not necessary to place the call from a fax machine. 6 When your machine begins to ring, do not answer the call. The machine requires several rings to learn the pattern. When the machine completes learning, the...

9 .6 <Faxing (SCX-5530FN only)> Printing received faxes on both sides of paper By using the Duplex button on your machine, you can set the machine to print received faxes on both sides of paper. 1 Press Duplex . 2 Press the Scroll buttons until the binding option you want appears. • Off : Prin...

9 .7 <Faxing (SCX-5530FN only)> Sending a delayed fax You can set your machine to send a fax at a later time when you will not be present. 1 Press Fax . 2 Load originals face up into the ADF, or place a single original face down on the scanner glass. For details about loading an original, see ...

10 .1 <Fax setup (SCX-5530FN only)> 10 Fax setup (SCX-5530FN only) This chapter gives you information on setting up your machine for receiving and sending faxes. This chapter includes: • Changing the fax setup options • Changing the default document settings • Printing sent fax report automati...

10 .2 <Fax setup (SCX-5530FN only)> Changing the default document settings The fax options, including resolution and darkness, can be set to the most frequently used modes. When you send a fax, the default settings are used if they are not changed by using the corresponding button and menu. 1 ...

10 .3 <Fax setup (SCX-5530FN only)> Registering after pressing a speed button 1 Press Fax . 2 Press one of the speed buttons. 3 Press OK when Yes appears. 4 Enter the name you want and press OK . For details on how to enter alphanumeric characters, see page 2.3. 5 Enter the fax number you want...

10 .4 <Fax setup (SCX-5530FN only)> 8 When you have finished, press the Scroll buttons to select No at the Another No.? prompt and press OK . 9 Press Stop/Clear to return to Standby mode. Editing a group dial number You can delete a specific entry from a group or add a new number to the select...

11 .1 <Using USB flash memory (SCX-5530FN only)> 11 Using USB flash memory (SCX-5530FN only) This chapter explains how to use a USB memory device with your machine. This chapter includes: • About USB memory • Plugging in a USB memory device • Scanning to a USB memory device • Printing from a U...

12 .1 <Ordering supplies and accesso- 12 Ordering supplies and accessories This chapter provides information on purchasing toner cartridges and accessories available for your machine. Toner cartridges When the toner runs out, you can order the following types of toner cartridges for your machine:...

13 .1 <Maintenance> 13 Maintenance This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • Printing reports • Clearing memory • Cleaning your machine • Maintaining the toner cartridge • Maintenance Parts • Managing your machine from the ...

13 .2 <Maintenance> Clearing memory You can selectively clear information stored in your machine’s memory. Caution For SCX-5530FN users, before clearing the memory, make sure that all fax jobs have been completed, or you will lose those jobs. 1 Press Menu until System Setup appears on the bott...

13 .3 <Maintenance> 3 With a dry lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area and the toner cartridge cavity. Caution While cleaning the inside of the machine, be careful not to touch the transfer roller, located underneath the toner cartridge. Oil from y...

13 .4 <Maintenance> Expected cartridge life The life of the toner cartridge depends on the amount of toner that print jobs require. When printing text at ISO 19752 5% coverage, a new toner cartridge lasts an average of either 8,000 or 4,000 pages. (The original toner cartridge supplied with th...

13 .5 <Maintenance> 5 Close the front cover. Make sure that the cover is securely closed. Replacing the toner cartridge When the toner cartridge is completely empty:• Toner Empty appears on the display. • The Status LED blinks red. • The machine stops printing. For the SCX-5530FN, incoming fax...

13 .6 <Maintenance> Sending new toner notification (SCX-5530FN only) You can set your machine to automatically send a fax to your service company or dealer to notify them that your machine requires a new toner cartridge when the toner cartridge needs to be replaced. The fax number needs to be ...

13 .7 <Maintenance> Checking replaceables If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if necessary. The following information are available for checking the replaceable elements of yo...

14 .1 <Troubleshooting> 14 Troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Clearing document jams • Clearing paper jams • Understanding display messages • Solving other problems Clearing document jams When an original ja...

14 .2 <Troubleshooting> Roller misfeed 1 Open the scanner lid. 2 Seize the misfed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands. 3 Close the scanner lid. Then load the removed pages back into the ADF. Clearing paper jams When a paper jam o...

14 .3 <Troubleshooting> In the optional tray 2 1 Pull the optional tray 2 open. 2 Remove the jammed paper from the machine. If the paper does not move when you pull, or if you do not see the paper in this area, stop and go to step 3. 3 Pull the tray 1 half. 4 Pull the paper straight up and out...

14 .4 <Troubleshooting> 2 Remove the jammed paper by gently pulling it straight out. 3 Replace the toner cartridge and close the front cover. Printing automatically resumes. In the paper exit area 1 Open and close the front cover. The jammed paper is automatically ejected from the machine. 2 G...

14 .5 <Troubleshooting> 6 Unfold the duplex guide fully. 7 While pushing the fuser lever to the right, open the fuser door. 1 duplex guide 1 1 fuser lever 2 fuser door 2 1 8 Pull the jammed paper out. If the jammed paper does not move when you pull, push the pressure lever on each side up to l...

14 .6 <Troubleshooting> 2 Remove the jammed paper from the duplex unit. If the paper does not come out with the duplex unit, remove the paper from the bottom of the machine. Duplex Jam 1 1 Open the rear cover. 2 Unfold the duplex guide fully. 1 1 duplex guide 3 Pull the jammed paper out. Tips ...

14 .7 <Troubleshooting> Understanding display messages Messages appear on the Smart Panel program window or the control panel display to indicate the machine’s status or errors. Refer to the tables below to understand the messages’ meaning and correct the problem if necessary. Messages and the...

14 .10 <Troubleshooting> Toner cartridge-related messages Message Meaning Suggested solutions Install Toner A toner cartridge is not installed. Install a toner cartridge. Invalid Toner The toner cartridge you have installed is not for your printer. Install a Samsung-genuine toner cartridge, de...

14 .15 <Troubleshooting> Horizontal stripes If horizontally aligned black streaks or smears appear:• The toner cartridge may be installed improperly. Remove the cartridge and reinsert it. • The toner cartridge may be defective. Remove the toner cartridge and install a new one. See page 13.5. •...

14 .16 <Troubleshooting> Scanning problems Condition Suggested solutions The scanner does not work. • Make sure that you place the original to be scanned face down on the scanner glass, or face up in the ADF. • There may not be enough available memory to hold the document you want to scan. Try...

14 .18 <Troubleshooting> Common Windows problems Note Refer to Microsoft Windows 98/Me/NT 4.0/2000/XP User’s Guide that came with your PC for further information on Windows error messages. Condition Suggested solutions “File in Use” message appears during installation. Exit all software applic...

14 .19 <Troubleshooting> Common Linux problems Problem Possible Cause and Solution The machine does not print • Check if the printer driver is installed in your system. Open Unified Driver configurator and switch to the Printers tab in Printers configuration window to look at the list of avail...

14 .20 <Troubleshooting> The machine does not scan • Check if a document is loaded into the machine. • Check if your machine is connected to the computer. Make sure if it is connected properly if I/O error is reported while scanning. • Check if the port is not busy. Since functional components...

15 .1 <Installing accessories> 15 Installing accessories Your machine is a full-featured one that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several accessories available to enhance your machine’s c...

16 .1 <Specifications> 16 Specifications This chapter includes: • General specifications • Scanner and copier specifications • Printer specifications • Facsimile specifications (SCX-5530FN only) General specifications Item Description ADF Up to 50 sheets (75 g/m 2 ) ADF document size Width: 14...

16 .2 <Specifications> Scanner and copier specifications Item Description Compatibility TWAIN standard / WIA standard Scanning method ADF and Flat-bed Color CCD (Charge Coupled Device) module Resolution Optical: 600 x 1,200 dpi (mono and color)Enhanced: 4,800 x 4,800 dpi Effective scanning len...

1 I NDEX Numerics 2/4-up, special copy 6.2 A accessories installing memory DIMM 15.1 order information 12.1 Address Book, use 8.5 ADF 1.2 ADF rubber pad, replace 13.7 ADF, load 5.1 alarm sound 2.3 Ans/Fax mode, receiving mode 9.4 B background image, erase 6.4 C characters, enter 2.3 cleaning drum 13...

Installing Printer Software in Windows 5 1 Installing Printer Software in Windows This chapter includes:• Installing Printer Software• Reinstalling Printer Software• Removing Printer Software Installing Printer Software You can install the printer software for local printing or network printing. To ...

Installing Printer Software in Windows 6 N OTE : If your printer is not already connected to the computer, the following window will appear. • After connecting the printer, click Next.• If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the instal...

Installing Printer Software in Windows 11 Reinstalling Printer Software You can reinstall the software if installation fails. 1 Start Windows. 2 From the Start menu select Programs or All Programs → your printer driver name → Maintenance. 3 Select Repair and click Next . 4 The list of printers avail...

Installing Printer Software in Windows 12 Removing Printer Software 1 Start Windows. 2 From the Start menu select Programs or All Programs → your printer driver name → Maintenance. 3 Select Remove and click Next.You will see a component list so that you can remove any item individually. 4 Select the...

Basic Printing 13 2 Basic Printing This chapter explains the printing options and common printing tasks in Windows. This chapter includes:• Printing a Document• Printing to a file (PRN)• Printer Settings - Layout Tab- Paper Tab- Graphics Tab- Extras Tab- About Tab- Printer Tab- Using a Favorite Sett...

Basic Printing 14 Printer Settings You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job. Your printer properties w...

Basic Printing 15 Paper Tab Use the following options to set the basic paper handling specifications when you access the printer properties. See “Printing a Document” on page 13 for more information on accessing printer properties. Click the Paper tab to access various paper properties. Copies Copie...

Basic Printing 16 Graphics Tab Use the following Graphic options to adjust the print quality for your specific printing needs. See “Printing a Document” on page 13 for more information on accessing printer properties. Click the Graphic tab to display the properties shown below.. Resolution The Resol...

Basic Printing 17 Extras Tab You can select output options for your document. See “Printing a Document” on page 13 for more information about accessing the printer properties.Click the Extras tab to access the following feature: Watermark You can create a background text image to be printed on each ...

Basic Printing 18 Using a Favorite Setting The Favorites option, which is visible on each properties tab, allows you to save the current properties settings for future use. To save a Favorites item: 1 Change the settings as needed on each tab. 2 Enter a name for the item in the Favorites input box. ...

Advanced Printing 19 3 Advanced Printing This chapter explains printing options and advanced printing tasks. N OTE : • Your printer driver Properties window that appears in this User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is simil...

Advanced Printing 20 Printing Posters This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper, for the purpose of pasting the sheets together to form one poster-size document. 1 To change the print settings from your software application, access printer properties. S...

Advanced Printing 21 Printing on Both Sides of Paper You can print on both sides of a sheet of paper. Before printing, decide how you want your document oriented.The options are: • Printer Setting, if you select this option, this feature is determined by the setting you’ve made on the control panel ...

Advanced Printing 22 Using Watermarks The Watermark option allows you to print text over an existing document. For example, you may want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. There are several predefined wate...

Advanced Printing 23 Using Overlays What is an Overlay? An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of preprinted forms and letterhead paper. Rather than using pr...

Using Windows PostScript Driver 24 4 Using Windows PostScript Driver If you want to use the PostScript driver provided with your system CD-ROM to print a document.PPDs, in combination with the PostScript driver, access printer features and allow the computer to communicate with the printer. An insta...

Using Direct Print Utility 25 5 Using Direct Print Utility This chapter explains how to use Direct Print Utility to print PDF files without having to open the files. C AUTION • You can not print PDF files that are restricted to print. Deactivate the printing restriction feature, and retry printing. ...

Sharing the Printer Locally 26 6 Sharing the Printer Locally You can connect the printer directly to a selected computer, which is called “host computer,” on the network. The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. ...

Using Smart Panel 27 7 Using Smart Panel Smart Panel is a program that monitors and informs you of the status of the printer, and allows you to customize the printer’s settings. Smart Panel is installed automatically when you install the printer software. N OTES : • To use this program, you need: - ...

Using Smart Panel 28 Driver Setting (Only for Windows) You can use the printer properties window, which allows you to access all of the printer options you need for using your printer. For details, See “Printer Settings” on page 14. Opening the Troubleshooting Guide Using the troubleshooting guide, ...

Scanning 29 8 Scanning Scanning with your machine lets you turn pictures and text into digital files on your computer. Then you can fax or e-mail the files, display them on your web site or use them to create projects that you can print using Samsung SmarThru software or the WIA driver.This chapter ...

Scanning 30 Using Samsung SmarThru Follow these steps to start scanning using the SmarThru: 1 Make sure that your machine and computer are turned on and properly connected to each other. 2 Place your photograph or page on the document glass or ADF. 3 Once you have installed Samsung SmarThru, you wil...

Scanning 31 •SettingsCustomizing settings of Scan To basic functions. Allows you to customize settings for Application, E-mail, OCR, and Web functions. 5 Click the service icon according to your job. 6 SmarThru 4 opens for the selected service. Adjust the scan settings. 7 To start scanning, click Sc...

Using Your Printer in Linux 32 9 Using Your Printer in Linux You can use your machine in a Linux environment. This chapter includes:• Getting Started• Installing the Unified Linux Driver• Using the Unified Driver Configurator• Configuring Printer Properties• Printing a Document• Scanning a Document ...

Using Your Printer in Linux 33 5 When the installation is complete, click Finish. The installation program has added the Unified Driver Configurator desktop icon and Samsung Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the onscreen help that is ...

Using Your Printer in Linux 34 Using the Unified Driver Configurator Unified Linux Driver Configurator is a tool primarily intended for configuring Printer or MFP devices. Since an MFP device combines the printer and scanner, the Unified Linux Driver Configurator provides options logically grouped f...

Using Your Printer in Linux 35 Classes Tab The Classes tab shows a list of available printer classes. • Refresh : Renews the classes list.• Add Class... : Allows you to add a new printer class.• Remove Class : Removes the selected printer class. Scanners Configuration (for MFP device only) In this w...

Using Your Printer in Linux 36 Configuring Printer Properties Using the properties window provided by the Printers configuration, you can change the various properties for your machine as a printer. 1 Open the Unified Driver Configurator. If necessary, switch to Printers configuration. 2 Select your...

Using Your Printer in Linux 37 The following four tabs display at the top of the window. •General - allows you to change the paper size, the paper type, and the orientation of the documents, enables the duplex feature, adds start and end banners, and changes the number of pages per sheet. •Text - al...

Using Your Printer in Linux 38 The document is scanned and the image preview appears in the Preview Pane. 7 Change the scan options in the Image Quality and Scan Area sections.•Image Quality: allows you to select the color composition and the scan resolution for the image. •Scan Area: allows you to ...

Using Your Printer in Linux 39 You can use the following tools to edit the image: For further details about the Image Manager application, refer to the onscreen help. Tools Function Saves the image. Cancels your last action. Restores the action you canceled. Allows you to scroll through the image. C...

Using Your Printer with a Macintosh (SCX-5530FN only) 41 Install the Scan driver 1 Make sure that you connect your printer to the computer. Turn on your computer and printer. 2 Insert the CD-ROM which came with your printer into the CD-ROM drive. 3 Double-click CD-ROM icon that appears on your Macin...

42 Printing N OTES : • The Macintosh printer’s properties window that appears in this User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is similar. • You can check your printer name in the supplied CD- ROM. Printing a Document When you ...

43 Printer Features Setting The Printer Features tab provides options for selecting the paper type and adjusting print quality.Select Printer Features from the Presets drop-down list to access the following features: Image Mode Image Mode allows the user to enhance printouts. The available options a...

44 Duplex Printing You can print on both sides of the paper. Before printing in the duplex mode, decide on which edge you will be binding your finished document. The binding options are: Long-Edge Binding: Which is the conventional layout used in book binding. Short-Edge Binding: Which is the type o...