Samsung RH57H8030SL - User Manual

English - 7 SAFET Y INFORMA TION CAUTION SIGNS FOR INSTALLATION • Keep ventilation opening in the appliance enclosure or mounting structure clear of obstruction. • Allow the appliance to stand for 2 hours after installation. - When installing the refrigerator, make sure both legs contact the floor f...

English - 11 SAFET Y INFORMA TION CAUTION SIGNS FOR CLEANING AND MAINTENANCE • Do not directly spray water inside or outside the refrigerator. - There is a risk of fire or electric shock. • Do not use or place any substances sensitive to temperature such as inflammable sprays, inflammable objects, d...

English - 13 SAFET Y INFORMA TION door latch so that small children or animals cannot become trapped inside. Leave the shelves in place so that children may not easily climb inside. Children should be supervised to ensure that they do not play with the old appliance. • Please dispose of the packagin...

English - 15 SETTING UP GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of the Samsung refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers. Selecting the best location for the Refrigerator • Select a location with easy ...

English - 16 When moving your refrigerator To prevent floor damage, be sure the front leveling legs are in the up position (above the floor).Refer to “How to level the refrigerator” in the manual on page 21. Screw Driver Leg Flooring For proper installation, you must place this refrigerator on a lev...

English - 17 SETTING UP SETTING UP THE REFRIGERATOR DOORS If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors. Separating the water supply line from the refrigerator 1. Pull the two water lines (which are in the Fixer) out to the front. 2. Remove two wat...

English - 18 2. Remove the hinge cover and then disconnect the electrical wire connector. 3. Flip the clamp (  A  ) up in direction (  1  ) and then pull it off in direction (  2  ). ( A ) ( 1 ) ( A ) ( 2 ) 4. Remove the hinge (  B  ). ( B ) 5. Lift up the door and detach it from the refrigerator. •...

English - 19 SETTING UP 4. Hook up the electrical wire connector. 5. Insert 2 front parts of the cover first, push down on both side parts of the cover, and then secure the cover in place using a Phillips screwdriver. • The doors can be assembled in the reverse order of their disassembly. • The disp...

English - 20 DISASSEMBLE THE REFRIGERATOR DOORS 1. Disconnect the power cord, and remove 2 cover screws using a Phillips screwdriver (  1  ). Then open the refrigerator door and pull the hooks on the sides to loosen the cover ( 2 ). Lift up the cover and towards you to detach it ( 3 ). - Detach the ...

English - 21 SETTING UP LEVELING THE REFRIGERATOR AND ADJUSTING HEIGHT AND GAP OF THE DOORS How to level the refrigerator To avoid a hazard due to instability of the refrigerator, please place the refrigerator on a horizontal support and levelled in accordance with the following instruction for inst...

English - 22 If the freezer side is lower: • Insert a flathead screwdriver into the height leveler located at the bottom back of the freezer door and turn it in the direction of the arrow until it is level. If the refrigerator side is lower: • Insert a flathead screwdriver into the height leveler lo...

English - 23 SETTING UP 1. Adjust the height of the door by turning the adjustment nut (  B  ) in the counterclockwise direction (   ) with a spanner. (Turn it in the counterclockwise direction (   ) to increase the height of the door and in the clockwise direction (   ) to decrease it.) - Open the ...

English - 24 HOW TO ADJUST THE REFRIGERATOR DOOR GAP (BACK) If the gap between the refrigerator door and the refrigerator is uneven: • Use the adjustors located at the top edge inside each door. 1. Open the door where the gap with the refrigerator is narrower and then turn the adjustor in the counte...

English - 25 SETTING UP Connecting to the water supply line 1. First, shut off the main water supply line. 2. Locate the nearest cold, drinking water line. 3. Follow the Water Line Installation Instructions in the installation kit. CAUTION The water line must be connected to the cold water pipe. If ...

English - 26 No Leak 1. Slip the compression nut (  A  ) through the supplied plastic tubing (  A  ). 2. Tighten the compression nut (  A  ) onto the 1/4” compression fitting. - If you are using copper tubing, slip the compression nut (  B  ) (not included) and ferrule (not included) on copper tubin...

English - 27 SETTING UP Before calling service - Any sounds you hear when the ice maker dumps ice into the bucket are part of normal operation. - If you don’t dispense ice for a long period of time, the ice may form clumps in the ice bucket. If ice clumps form, remove the remaining ice and empty the...

English - 28 Check the amount of water supplied to the ice tray. 1. Lift up the icemaker cover and gently pull it out. 2. When you press the Test button for 3 seconds, the ice cube container is filled with water from the water supply tap. Check to make sure the amount of water is correct (see the il...

English - 29 OPERA TING Operating your Samsung refrigerator USING THE CONTROL PANEL DISPENSER MODEL (2 LEVER TYPE) (1) (2) (3) (7) (4) (5) (6) (8) (9) (10) (1 LEVER TYPE) (1) (2) (3) (11) (4) (5) (6) (12) (9) (10) NORMAL MODEL (1) (4) (10) (1) (4) (10) (3) ( 1 ) Freezer / Power Freeze (3 sec) The Fr...

English - 33 OPERA TING PARTS AND FEATURES Use this page to become more familiar with the parts and features of the Refrigerator. (This image may different depends on the model.) DISPENSER MODEL (2) (3) (4) (13)Deodorizer Foldable Shelf (Optional) Water filter (1) (15)(14) (5) (6) (7) (8)(9) (10) (1...

English - 35 OPERA TING CONTROLLING THE TEMPERATURE Basic temperature of Freezer and Refrigerator Compartments The basic and recommended temperatures of the Freezer and Fridge compartments are -2 °F and 37 °F (or -19 °C and 3 °C) respectively. If the temperature of the Freezer or Refrigerator Compar...

English - 36 USING THE COLD WATER DISPENSER (2 LEVER TYPE) Push the appropriate ice type button to select what you want dispensed. NO ICE Select this if you want to turn ice maker off Using the ice lever ( 1 ) Push the Ice lever dispenser ( 1 ) gently with your glass. Ice will be released from the d...

English - 37 OPERA TING For more space, you can store food with Guard FRE-UPP instead of the ice bucket, and remove the COVER-ICE MAKER and Snack Bin. If you remove the ice bucket, ICE OFF will blink on the display panel. Furthermore, you can remove the freezer Upper drawer. Since it does not affect...

English - 39 OPERA TING SMART ECO FEATURES Smart Eco System Keep freshness of food using 4 sensors according to the operating environment, usage pattern and the refrigerator operating status while saving electricity costs. Outside Humidity Sensor Outside Temperature Sensor Internal Temperature Senso...

English - 40 How to use the multi supporter 1. When not in use, leave the Multi Supporter flipped over as shown in the diagram. 2. Flip the Multi Supporter to position 1 to prevent items from falling out and over. 1 3. Flip the Multi Supporter to position 2 to use it as a divider. 2 REMOVING THE REF...

English - 42 CLEANING THE REFRIGERATOR • Do not use benzene, thinner, Clorox, or car detergent to clean the refrigerator. They can damage the surface of the appliance and may cause a fire. • Do not spray the refrigerator with water while it is plugged in. This can cause an electric shock. To clean t...

English - 43 OPERA TING CHANGING THE WATER FILTER To reduce risk of water damage to your property DO NOT use generic brands of water filers in your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG is not legally responsible for any damage, including, but not limited to property da...

English - 44 Reverse Osmosis Water Supply IMPORTANT : The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa). If a reverse osmosis water filtration system is connected to your col...

English - 46 Troubleshooting PROBLEM SOLUTION The refrigerator does not work at all or it does not chill sufficiently. • Check that the power plug is properly connected. • Is the temperature control on the display panel set to the correct temperature? Try setting it to a lower temperature. • Is the ...

Memo DA68-03015B (EN)-10.indd 48 2017. 7. 7. �� 9:28

Ambient Room Temperature Limits This refrigerator is designed to operate in ambient temperatures specified by its temperature class marked on the rating plate. Class Symbol Ambient Temperature range (°C) IEC 62552 (ISO 15502) ISO 8561 Extended Temperate SN +10 to +32 +10 to +32 Temperate N +16 to +3...