Samsung MCM-A00N - Installation Manual

Page 2 - DVM CHILLER; Installation manual

DVM CHILLER Installation manual Module control MCM-A00N • Thank you for purchasing this Samsung air conditioner. • Before operating this unit, please read this installation manual carefully and retain it for future reference. SOL MODULE CONTROLLER_IM_05747A-00_EN.indd 3 2016-01-20 오후 12:00:16

Page 3 - Contents

2 English 2 Contents PREPARATION 3 Safety information 3 INSTALLATION 5 Checking before the installation 5 Accessories 5 External dimension 5 Installing the module control 6 Installing the module control 6 DVM CHILLER Tracking 9 Connecting the module control 10 Restarting the module control communica...

Page 4 - Safety information

3 English PREP ARA TION WARNING Hazards or unsafe practices that may result in severe personal injury or death. CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage. WARNING Contact service center for installation. y If not, there is risk of product malfunc...

Page 6 - Accessories; External dimension; Checking before the installation

5 English INSTALLA TION Accessories Item Module control M4xL16 screws User manual Installation manual Quantity 1 4 1 1 Shape CAUTION • The installation must be performed by a qualified expert.• Before installing the module control, make sure to check if it is turned off.• Install the module control ...

Page 7 - Installing the module control

6 English INSTALLA TION Installing the module control 1 Disassemble the module control. y y Push a hook with one hand and push up another hook with another hand to disassemble the rear cover. NOTE • It might be easier to disassemble it if you put a flat-head screw driver into the square hole above t...

Page 10 - DVM CHILLER Tracking

9 English INSTALLA TION DVM CHILLER Tracking When installing the module control and then turning it on, the tracking will be performed automatically. y y To perform the tracking again, press the + button at the same time for more than 5 seconds. y y During the tracking, the total number of currently...

Page 11 - Connecting the module control

10 English INSTALLA TION Connecting the module control Module control 1:1 Install one DVM CHILLER to a single module control. DVM CHILLER F3, F4 Module control Installing the module control SOL MODULE CONTROLLER_IM_05747A-00_EN.indd 10 2016-01-20 오후 12:00:19

Page 13 - Restarting the module control communication; Module control error display; When an error occurs in DVM CHILLER (Product group display : A)

12 English INSTALLA TION Installing the module control Restarting the module control communication After changing the installation status (changing the number of the installed DVM CHILLERs or their numbers or resetting the group/module) of DVM CHILLERs, the module control communication must be resta...

Page 14 - When an error occurs in the module control

13 English INSTALLA TION When an error occurs in the module control Only the error code will be displayed. y y Example) When error 601 occurs from the Module control Module control error codes Error codes Description 604 Communication tracking error between a module control and DVM CHILLERs 618 The ...

Page 15 - Service mode setting; Setting the service mode

14 English SETTING Service mode setting 05 01 02 03 04 No. Item Description Main menu Displays a main menu value of the service mode table. Sub menu Displays a sub menu value of the service mode table. Page Displays a Page value of the service mode table. Data Segment Displays a Data value of the se...

Page 17 - Service setting mode

16 English SETTING Setting the service mode Service setting mode y y After saving the setting, the DVM CHILLERs and the module control may be initialized if it is necessary. y y When entering the service mode during the tracking, you can enter the Data stage on the Main menu 4,5,6,9 (Save at DVM CHI...

Page 28 - Option code

27 English SETTING Option code SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 0 X X X X X 1 X X X X X SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 2 X X X X X 3 X X X X X y y Each SEG will be displayed corresponding with Page. – SEG2 ~ SEG6 : Page1 ~ Page5 ...

Page 29 - Module or group operation

28 English SETTING Setting the service mode Module or group operation Module/group operation is to combine multiple units according to modules or groups of a single water pipe system and to operate them depending on working condition. Installation example) F3, F4 Module control Main Main Main Main G...