Page 2 - SAFETY INFORMATION; SAFETY WARNINGS; WARNING; • To reduce the risk of fire or electric shock, do; CAUTION; Do not expose this apparatus to dripping or; Wiring the Main Power Supply; IMPORTANT NOTICE
ENG - 2 SAFETY INFORMATION SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.Refer to the table below for an explanation of symbols which may be on your Samsung product. CAUTIO...
Page 3 - bared flexible cord. Never attempt to insert bare; IMPORTANT; PRECAUTIONS; requirements listed on the identification
ENG - 3 However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug...
Page 4 - Fabric cleaning
ENG - 4 Fabric cleaning Remove any dirt or stain on the product surface immediately. Removing and cleaning can be less effective for some substances or if left for a prolonged time. CAUTION • Use a vacuum cleaner or an adhesive lint roller to remove dust, handprints, and the likes. – Some cleaning b...
Page 5 - CONTENTS; Output specifications for the different sound effect modes
ENG - 5 CONTENTS 01 Checking the Components 7 02 Product Overview 8 Top Panel of the Soundbar ------------------------- 8 Bottom Panel of the Soundbar ------------------------- 9 03 Using the Soundbar Remote Control 10 Inserting Batteries before using the Remote Control (AA batteries X 2) ----------...
Page 6 - Configuring Amazon Alexa; Specifications and Guide; Specifications
ENG - 6 07 Connecting an External Device 27 Method 1. Connecting using an HDMI Cable (Capable of Dolby Atmos decoding and playback) ------------------------- 27 Method 2. Connecting using an Optical Cable ------------------------- 28 08 Connecting a Mobile Device 29 Method 1. Connecting via Bluetoot...
Page 7 - 1 CHECKING THE COMPONENTS
ENG - 7 01 CHECKING THE COMPONENTS VOL WOOFER SOUNDBAR SOUND MODE PAIR Soundbar Main Unit Soundbar Remote Control / Batteries Subwoofer x 2 (M4 x L10) x 2 Power Cord (Subwoofer, Soundbar) Screw x 2 x 2 Wall Mount Guide Holder-Screw Bracket-Wall Mount x 4 Rubber-Foot • For more information about the ...
Page 8 - 2 PRODUCT OVERVIEW; Top Panel of the Soundbar; If you hear sounds from both the TV and Soundbar, go to the; Settings; menu for the TV audio and; External Speaker
ENG - 8 02 PRODUCT OVERVIEW Top Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. (Multi Function) Button • In standby mode, press the (Multi Function) button to turn on the Soundbar. • Press the (Multi Function) button to change the input source. • Press the...
Page 9 - Bottom Panel of the Soundbar
ENG - 9 Bottom Panel of the Soundbar ID SET HDMI IN 1 HDMI IN 2 POWER NETWORK SERVICE DIGITAL AUDIO IN (OPTICAL) HDMI TO TV (eARC/ARC) HDMI 2 HDMI 1 ID SET (WOOFER/REAR) POWER ID SET NETWORK SERVICE ID SET (WOOFER/REAR) DIGITAL AUDIO IN (OPTICAL) HDMI TO TV (eARC/ARC) HDMI 2 HDMI 1 ID SET HDMI IN 1 ...
Page 10 - How to Use the Remote Control
ENG - 10 03 USING THE SOUNDBAR REMOTE CONTROL Inserting Batteries before using the Remote Control (AA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) oriented so that their polarity is correct. Slide the back cover back i...
Page 13 - SOUND MODE; mode is; SURROUND
ENG - 13 Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER (Up) TV remote control On/Off (Standby) page 14 Up ID SET page 16 (Sound Control) 7 Band EQ page 12 Output specifications for the different sound effect modes Ef...
Page 14 - Adjusting the Soundbar volume with a TV remote control
ENG - 14 Adjusting the Soundbar volume with a TV remote control Adjust the Soundbar volume using the TV’s remote control. • This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported. • Set the TV speaker to External Spe...
Page 15 - 4 CONNECTING THE SOUNDBAR; Connecting the power and units; Connect the Power cord to the Subwoofer.; Connect the Power cord to the Soundbar.
ENG - 15 04 CONNECTING THE SOUNDBAR Connecting the power and units Use the Power cord to connect the Subwoofer and Soundbar to an electrical outlet in the following order: • For more information about the required electrical power and power consumption, refer to the label attached to the product. (L...
Page 16 - NOTES; Manually connecting the Subwoofer; Before performing the manual connection procedure below:; Up; ID SET
ENG - 16 NOTES • Connect the Subwoofer power before connecting to the Soundbar. The Subwoofer will be automatically connected when turning on the Soundbar. • If you unplug and reconnect the power cord when the product is turned on, the Soundbar turns on automatically. Manually connecting the Subwoof...
Page 17 - LED Indicator Lights on the Rear of Subwoofer; LED
ENG - 17 4. Check if the LINK LED is solid blue (connection complete). Blue is On The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer. LED Indicator Lights on the Rear of Subwoofer LED Status Description Resolu...
Page 19 - button for 5 seconds or
ENG - 19 Connecting an SWA-9000S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9000S, sold separately) to your Soundbar. 1. Connect the Wireless Receiver Module to 2 Surround Speakers. – The speaker cables are colou...
Page 20 - Press the; button on the remote control for 5 seconds.; The Soundbar will automatically power on when; stuttering from the woofer as the connection finalises.; If the SWA-9000S is not connected, repeat the procedure from Step 2.
ENG - 20 3. Press the Up button on the remote control for 5 seconds. • The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. • The Soundbar will automatically power on when ID SET is complete. SOUN D MOD E PAIR 5 Sec ID SET CAUTION • If your Soundbar was pla...
Page 21 - 5 USING A WIRED CONNECTION TO THE TV; Method 1. Connecting with HDMI; Connecting the TV that supports HDMI ARC (Audio Return Channel); HDMI IN; TV ARC
ENG - 21 05 USING A WIRED CONNECTION TO THE TV Method 1. Connecting with HDMI CAUTION • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. • To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals marked ARC. Otherwise, the TV...
Page 22 - If “; Method 2. Connecting using an Optical Cable; Pre-connection Checklist
ENG - 22 • To connect with eARC, the eARC function in the TV menu should be set to On. Refer to the TV user manual for details on setting. (e.g. Samsung TV : Home ( ) → Settings ( ) → Sound → Expert Settings → HDMI-eARC Mode (Auto)) • If “ TV ARC ” does not appear in the display window of the Soundb...
Page 23 - Using the Q-Symphony Function; Sound Output
ENG - 23 1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar and the OPTICAL output port on the TV with the optical cable (not supplied), as shown in the figure. 2. Turn on the Soundbar and TV. 3. Press the (Multi Function) button at the top of the Sou...
Page 24 - 6 USING A WIRELESS CONNECTION TO THE TV; Method 1. Connecting via Bluetooth; BT PAIRING; The initial connection
ENG - 24 06 USING A WIRELESS CONNECTION TO THE TV Method 1. Connecting via Bluetooth When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. • Only one Samsung TV can be connected at a time. • Samsung TV that supports Bluetooth can be connected. Check...
Page 25 - If the device fails to connect; Disconnecting the Soundbar from the Samsung TV; BT”; What is the difference between BT READY and BT PAIRING?; BT READY; Notes on Bluetooth connection; If there is a strong electrical field around the Soundbar.
ENG - 25 If the device fails to connect • If you have an existing Soundbar (e.g., [AV] Samsung Soundbar Q900T ) on the list of speakers on the Samsung TV, delete it. • Then repeat steps 1 through 3. Disconnecting the Soundbar from the Samsung TV Press the (Multi Function) button at the top of the So...
Page 26 - TV is connected to the router
ENG - 26 Method 2. Connecting via Wi-Fi Pre-connection Checklist • Wi-Fi connection is available only on Samsung TV. • Check whether the wireless router (Wi-Fi) is turned on and the TV is connected to the router . • The TV and Soundbar must be connected to the same wireless network (Wi-Fi). • If you...
Page 27 - 7 CONNECTING AN EXTERNAL DEVICE; Method 1. Connecting using an HDMI Cable (Capable of Dolby; HDMI 1; HDMI
ENG - 27 07 CONNECTING AN EXTERNAL DEVICE Method 1. Connecting using an HDMI Cable (Capable of Dolby Atmos decoding and playback) Pre-connection Checklist • Dolby Atmos® and DTS:X are supported in HDMI mode only. • If the Audio Output options include Secondary Audio, make sure Secondary Audio is set...
Page 29 - 8 CONNECTING A MOBILE DEVICE; Method 1. Connecting via Bluetooth
ENG - 29 08 CONNECTING A MOBILE DEVICE Method 1. Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. • When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically turns on. OR SOUN D MOD...
Page 30 - : In this mode, you can connect a new device to the Soundbar.; button on the Soundbar remote control or press and hold the; BT
ENG - 30 What is the difference between BT READY and BT PAIRING? • BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before. • BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the Soundbar remote control or...
Page 31 - Disconnecting the Bluetooth device from a Soundbar; BT DISCONNECTED; Disconnecting the Soundbar from the Bluetooth device
ENG - 31 • Note that your Soundbar cannot be paired with other Bluetooth devices while using the Bluetooth option. • This wireless device may cause electrical interference during operation. Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. Fo...
Page 32 - SmartThings
ENG - 32 Method 2. Connecting via Wi-Fi (Wireless Network) To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required. The initial connection 1. Install and launch the SmartThings app from your mobile device (smartphone or tablet). 2. On the app, follow ...
Page 34 - Use voice commands to control the Soundbar; Things to try; Volume control; “Alexa, turn down the volume”; Playback control
ENG - 34 Use voice commands to control the Soundbar Trigger + Command Things to try Example of what to say Volume control "Alexa, turn up the volume." “Alexa, turn down the volume” Listening to streaming content from Amazon Music "Alexa, play some jazz music " Playback control "A...
Page 35 - Using the Tap Sound; Setting the Tap Sound function; placed at a sufficient distance away from the Soundbar.
ENG - 35 Using the Tap Sound Tap the Soundbar with your mobile device to play the sound of content on the mobile device through the Soundbar. • This function may not be supported, depending on the mobile device. • This function is only compatible with Samsung mobile devices with Android 8.1 or later...
Page 36 - Installation Precautions; Install on a vertical wall only.; Wallmount Components; Place the; Wall Mount Guide; against the wall; Wall Mount Guide
ENG - 36 09 INSTALLING THE WALL MOUNT Installation Precautions • Install on a vertical wall only. • Do not install in a place with high temperature or humidity. • Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point...
Page 37 - then fix the; firmly into a support screw hole.
ENG - 37 2. Align the Wall Mount Guide’s Centre Line with the centre of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape. • If you are not mounting below a TV, place the Centre Line in the centre of the installation area. Centre Line ...
Page 38 - 0 INSTALLING THE; Component; of the TV stand. Refer to the figure below.
ENG - 38 7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws . • Insert the Holder-Screws into the wide (bottom)...
Page 39 - Place the Soundbar on a TV stand.; Microphone; • Make sure the Soundbar is placed on a flat; UPDATE; Auto Update; Samsung may offer updates for the Soundbar’s; contains the update firmware to the; SERVICE; port of the Soundbar.
ENG - 39 Place the Soundbar on a TV stand. Microphone As illustrated in the image, align the centre of the Soundbar with the centre of the TV, carefully place the Soundbar onto the TV stand. At this time, place the microphone at the front of the stand not to interfere with voice recognition. TV Righ...
Page 40 - Unzip the file to create a folder with the file; Initialisation; INIT; Security updates; The website supports only some languages.
ENG - 40 1. Go to the Samsung website (www.samsung.com) → search for the model name from the customer support menu option. • For more information about update, refer to Upgrade Guide. 2. Download the upgrade file (USB type). 3. Unzip the file to create a folder with the file name. 4. Store the creat...
Page 41 - 2 TROUBLESHOOTING; ) → Sound → Sound Output →
ENG - 41 12 TROUBLESHOOTING Before seeking assistance, check the following. In case the power is not turned on ; Check whether the power cord of the Soundbar is correctly inserted into the outlet. In case the functions do not work properly ; After removing the power cord, insert it again. ; Remote t...
Page 43 - When Alexa is not configured correctly; The terms HDMI and HDMI High-Definition
ENG - 43 In case Alexa does not respond When the microphone is turned off or its reception is poor ; Press the (Mic On/Off) button at the top of the Soundbar to enable the microphone. ; Voice recognition may be unavailable due to ambient noise. Reduce the noise and try again. When the network is dis...
Page 44 - (b) you bring the unit to a repair centre and
ENG - 44 14 OPEN SOURCE LICENCE NOTICE To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com) 15 IMPORTANT NOTES ABOUT SERVICE • Figures and illustrations in this User Manual are provided for reference only and may differ from...
Page 45 - 6 SPECIFICATIONS AND GUIDE
ENG - 45 16 SPECIFICATIONS AND GUIDE Specifications Model Name HW-Q900T Weight 7.1 kg Dimensions (W x H x D) 1232.0 x 69.5 x 138.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power (18W x 6) + (10W x 3) + (18W x 6) + 160W Supported play fo...
Page 48 - United Kingdom
This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorise...
