Page 2 - TRADEMARKS
TRADEMARKS Product names mentioned in this document may be trademarks and/or registered trademarks of their respective companies. This guide may be changed for product improvement, standardization or other technical reasons without prior notice. © 2017 SAMSUNG ELECTRONICS Co., Ltd. Alle Rechte vorbe...
Page 3 - ENG; WARNING; afety Information
ENG The purpose of the Safety Concerns section is to ensure the safety of users and prevent property damage. Please read this document carefully for proper use. WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO Q...
Page 4 - Safety Information; Handling Cautions; HANDLING CAUTIONS; CAUTION
Safety Information Handling Cautions IMPORTANT NOTE If the power plug on this unit does not fit the wall outlets in your house, have the wall outlets replaced with outlets that fit by a licensed electrician. If the power cord is not long enough, obtain a suitable, safety-approved extension cord. I...
Page 5 - Environmental Considerations
ENG Safety Information Handling Cautions • Do not place the STB on top of other powered electrical equipment such as an amplifier or DVD player. • Do not operate in an enclosed space such as a Hi-Fi cabinet. • Do not allow the power cable or DC wire from the power supply to become trapped under an...
Page 6 - ontents; About the product; Method 1) Connecting to an HDMI supported AV receiver; Settings; Channel list export/import
C ontents About the product ---------------------------------------------------- 10 Key Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Media file format compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 7 - Contents; D mode
ENG Contents Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Screen resolution .................................................................................................. 42 3D mode ...........................
Page 9 - Appendix
ENG Using the DLNA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Appendix -------------------------------------------------------------- 77 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 10 - bout the product; KEY FEATURE
A bout the product KEY FEATURE Image Display of HD Grade Supports high-resolution video output of up to 1080p, enabling you to enjoy clear and sharp video. Electronic Program Guide (EPG) Function Using the EPG Channel Guide, you can check the program information and broadcasting schedule of a desire...
Page 11 - Media file format compatibility; MEDIA FILE FORMAT COMPATIBILITY
About the product Media file format compatibility ENG PVR (Personal Video Recorder) Allows recording chosen TV/Radio programs and watch them later. This feature will help you to avoid missing favorite shows and movies while you are not available. Dual Recording Thanks to double tuner configuration...
Page 12 - Resolution; Notes on the USB connection
About the product Media file format compatibility Supported Formats File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.wmv *.asf *.mp4*.mpg *.mpeg *.ts *.mov *.mkv *.xvid AVI MKV ASF MP4 MOV TS VC1/WMV-9 H264 MPEG4 SP/ASP (Xvid) MPEG2 1920x1080 15~...
Page 13 - Accessories; ACCESSORIES
About the product Accessories ENG ACCESSORIES Check for the supplied accessories below. Remote Control/ Batteries for Remote Control (AAA Size) Power Adapter/ Power Cable SCART Gender Cable HD+ Supplement User Manual Smart Card \ You can purchase the cable accessories (not supplied with the produc...
Page 14 - Front Panel; FRONT PANEL; Segment; STB State
About the product Front Panel FRONT PANEL This section describes the button and LEDs at the front panel. REMOTE CONTROL SENSOR CLOCK OR CHANNEL DISPLAY Channel button POWER button Smart Card Slot USB port (0.5A) 7 Segment 7-segment display presents simple information about current status of the de...
Page 15 - Rear Panel; REAR PANEL
About the product Rear Panel ENG REAR PANEL This section describes the names and functions of the ports on the rear panel. 7 EXT (TV) 3 OPTICAL OUT 8 DC POWER 2 ANT IN 1 Common Interface Slot 6 LAN 5 HDMI OUT 4 USB 1 Slot to insert Conditional Access Module. 2 To connect the Satellite antenna cabl...
Page 16 - Remote Control; REMOTE CONTROL
About the product Remote Control REMOTE CONTROL This section describes the function of each button on a remote control. 16 TV power on/off. Press to change TV or Radio channels. Tune to the previously viewed channel. Displays the scanned channel list. Displays the program information in the screen...
Page 17 - Installing batteries; TV; Button
About the product Remote Control ENG Installing batteries \ If the remote does not operate properly: - Check the polarity +/– of the batteries. - Check if the batteries are drained. - Check if the remote sensor is blocked by obstacles. - Check if there is any fluorescent lighting nearby. \ Dispose...
Page 18 - TV Control Codes; Brand
About the product Remote Control TV Control Codes Brand Code SAMSUNG TV+01, +02, +03, +04, +05, +06, +07, +08, +09 AIWA TV+82 ANAM TV+10, +11, +12, +13, +14, +15, +16, +17, +18 BANG & OLUFSEN TV+57 BLAUPUNKT TV+71 BRANDT TV+73 BRIONVEGA TV+57 CGE TV+52 CONTINENTAL EDISON TV+75 DAEWOO TV+19, +2...
Page 19 - CONNECTING TO A TV; onnections
ENG This section describes the connection to peripherals. Connect the peripherals (TV, DVD, etc.) referring to the descriptions in the following page. CONNECTING TO A TV You can connect your product to your TV using one of the methods illustrated on page 19 or 20. Method 1) Connection to a TV with t...
Page 20 - Connections; Connecting to a TV
Connections Connecting to a TV Method 2) Connection to a TV with the HDMI Port This section describes how to connect to a TV with an HDMI cable. AudioVideo TV 1. Connect the product to your TV using an HDMI cable. 2. Turn on the product and TV. 3. Press the input selector on your TV remote control...
Page 21 - Supported HDMI CEC function on Remote control
Connections Connecting to a TV ENG Supported HDMI CEC function on Remote control Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to an Anynet+ Samsung TV using an HDMI cable.The...
Page 22 - Connecting to an antenna; CONNECTING TO AN ANTENNA; Double tuner configuration; Notice; Tuner loop configuration
Connections Connecting to an antenna CONNECTING TO AN ANTENNA You can connect your double tuner STB to an antenna in two supported configurations. Double tuner configuration In this configuration, both tuners have to be connected to antenna signal independently by two separate coaxial cables. This...
Page 23 - Connecting to an Audio System; CONNECTING TO AN AUDIO SYSTEM; Method 1; Method 2; Connecting to an HDMI supported AV receiver
Connections Connecting to an Audio System ENG CONNECTING TO AN AUDIO SYSTEM Audio / Video Audio Method 1 TV HIMI OUT HIMI IN HIMI IN Method 2 1. Connect the product to an audio system using one of the two methods illustrated above. 2. Turn on the product, audio system, and TV. - Do not connect the...
Page 24 - Connecting to a Network Router; CONNECTING TO A NETWORK ROUTER; Wired Network
Connections Connecting to a Network Router CONNECTING TO A NETWORK ROUTER You can connect your product to your network router using illustrated on page. Wired Network Or Broadband modem Broadband service Router Broadband service (with integrated router) Broadband modem \ Internet access to HbbTV s...
Page 25 - Connecting the Power; CONNECTING THE POWER; Power
Connections Connecting the Power ENG CONNECTING THE POWER After connecting your STB to your TV, connect the included power adapter to the STB, and then plug the power adapter with power cord into a wall socket. When you plug in the power adapter for the first time, the STB will turn on automatical...
Page 26 - THE SETUP PROCEDURE; Run the first installation procedure; ettings
THE SETUP PROCEDURE • The OSD (On Screen Display) of this product may change after you upgrade the software version. \ You can download the latest user manual on www.samsung.com/de • The access steps may differ depending on the menu you selected. Turn on your TV after connecting the STB. When you co...
Page 27 - The Setup Procedure
Settings The Setup Procedure ENG 5. Use the ▲▼ buttons to choose a TV aspect ratio, and then press the " button. Select [Next] , and then press the " button on the remote control. 6. Use the ▲▼ buttons to choose a resolution, and then press the " button. Select [Next] , and then press ...
Page 28 - Quick Scanning
Settings The Setup Procedure Scanning There are three different scanning options. Quick Scanning This is the recommended scanning type; it is the simplest and the fastest. It downloads the complete channel list from a dedicated Astra transponder: 1 111 12.60375 GHz Horizontal 22000 KS/s 5/6 DVB-S ...
Page 29 - Auto Scanning; Manual Scanning
Settings The Setup Procedure ENG Auto Scanning Auto scanning performs channel search on all predefined transponders of the selected satellite. After successful scanning, a result screen appears with showing the numbers of the TV and radio channels found. Select [Save] and press the " button to...
Page 31 - Main Menu; MAIN MENU; Guide
Settings Main Menu ENG MAIN MENU 1 3 2 6 4 5 1 Guide : View the program schedule, select programs to watch, and view information about future programs. (See page 60.) 2 Channel : Displays the list of channels memorized. (See page 65.) 3 Library : Provides access to and allows management of the lis...
Page 32 - Accessing the Settings Screen; ACCESSING THE SETTINGS SCREEN; MENU; Settings Control Button Table; MENU; EXIT
Settings Accessing the Settings Screen ACCESSING THE SETTINGS SCREEN 1. Press the MENU button on the remote control. The Main menu appears. 2. Select [Settings] , and then press the " button. 3. To access the Settings menus, sub-menus, and options, please refer to the remote control illustrati...
Page 33 - Channel; CHANNEL; ASTRA channel list update; CH LIST
Settings Channel ENG CHANNEL You can configure various channel options. ASTRA channel list update Astra channel list update is the simplest and fastest way of scanning services. This option allows you to Change or Update the channel list available for the ASTRA satellite network. If channel list h...
Page 34 - Installation type; LNB Settings
Settings Channel Manual tune To scan the channel list of a satellite manually, follow these steps. 1. Select the [Channel] option using the ▲ / ▼ button, and then press the ▶ button. 2. Select the [Manual tune] option using the ▲ / ▼ button, and then press the ▶ button. 3. Select an option you wan...
Page 35 - Tuner Settings
Settings Channel ENG Tuner Settings Loop configuration In this configuration, antenna signal is passed by only one coaxial cable and the connection between tuners is created internally. And satellite signal has to be connected to the first tuner (ANT 1 IN) (near PCMCIA slot). This configuration in...
Page 36 - Installation
Settings Channel Double tuner configuration In this configuration, both tuners have to be connected to antenna signal independently by two separate coaxial cables. This configuration allows both tuners tuning to two satellite transponders at the same time. With double tuner configuration, the user...
Page 37 - Positioner
Settings Channel ENG Installation Type Tuner settings Availalble/Restricted Services Expected Result 2.SatCR 2.1 Disabled status [Tuner1 (ANT 1 IN)] - 2 REC in same TS - 2 REC among different TS - PIP - Zapping among different TS with 1 REC OOOO 2.2 Disabled status [Tuner2 (ANT 2 IN)] Not Supporte...
Page 38 - User settings
Settings Channel User settings Accordingly which antenna motor type has been selected, its configuration can be done in user settings window. DiSEqC Motor settings In this window, you are able to: - < West : Drive West - East > : Drive East - Assign Sat. Position : Store a position - Go To S...
Page 39 - Installer settings; Single Cable settings
Settings Channel ENG Installer settings These settings should be done while mounting the antenna with a motor and shouldn’t be changed during normal use. It is to set limits on the positioner motor if the satellite dish can’t move over whole driver angle (~180 degrees). These limits are important ...
Page 41 - Sound; SOUND; Preferred audio type; Digital volume control
Settings Sound ENG SOUND You can configure various audio options such as the [Prefered audio type] , [Digital volume control] , etc. Preferred audio type This allows selection of which audio type (Stereo or Multi-channel) should be used when both are available on the service selected. Digital volu...
Page 42 - Picture; PICTURE; Screen resolution; Anti flicker
Settings Picture PICTURE You can configure various display options such as the [Screen resolution] , [HDMI aspect ratio] , etc. Screen resolution This allows you to set the output resolution of the video signal. The number indicates the number of lines of video per frame. The i and p indicate inte...
Page 43 - HDMI video conversion; HDMI aspect ratio; Channel list preview
Settings Picture ENG HDMI video conversion This allows you to change the screen output type when you connect them using an HDMI cable. HDMI aspect ratio HDMI video conversion 4:3 Setting for how standard programs display on a widescreen TV [Auto], [Letter box], [Centre cut out], [Stretch], [None] ...
Page 44 - INFO; Screen saver
Settings Picture TV Scart aspect ratio This lets you adjust the output of the STB to the screen size of your TV when you connect them by usng a TV Scart cable. TV Scart video conversion This allows you to change the screen output type when you connect the TV and STB by using a Scart cable. Screen ...
Page 45 - LANGUAGE; Language; Subtitles secondary
Settings Language ENG LANGUAGE You can configure on-screen message language as well as subtitle languges. The selected language will only appear if it is supported. Language On Screen Display (OSD) is used to change the language of the menu screen. Automatic subtitles This allows you to enable/dis...
Page 46 - Media auto open
Settings Library / Media LIBRARY / MEDIA You can configure various options related to recording and USB storage setting. Media auto open Allows you to automatically open the library/media when a USB memory stick is inserted. Instant recording This allows you to choose the automatic recording of th...
Page 47 - Media renderer
Settings Library / Media ENG Media renderer DLNA Media Renderer is one DLNA functionality that enables you to remotely control viewing of content on device. Instead of browsing DMS (Digital Media Server) directly on STB, you can browse DMS (Digital Media Server) on tab or phone and also control fr...
Page 48 - CAS; Smart card information
Settings CAS CAS This section of the Settings contains information about Conditional Access System i.e. inserted Smart Card and CI+ module. Smart card information When you select this option, the STB displays the information about inserted Smart Card. Change Smartcard PIN-Code This option allows c...
Page 49 - System; SYSTEM; Product information; Auto Turn off; Timeout to power saving mode
Settings System ENG SYSTEM You can check product information or reset the STB to default settings. Product information This menu displays the product information: [Brand ID] , [Product ID] , [Firmware version] , [Software version] , [Micom version] , [Serial number] and [Last software update] . Au...
Page 50 - Automatic; Manual
Settings System Network settings Before you begin, contact your ISP (Internet Service Provider) to find out if your IP address is static. If it is dynamic and you have a wired network, we recommend using the Automatic configuration procedures described below. Connect the STB to your router using a...
Page 51 - Reset to default settings
Settings System ENG Reset to default settings Resets all settings to their default settings. The default PIN is 0000.To Reset to the default, follow these steps: 1. Press the MENU button. 2. Select [Settings] > [System] , and then press the ▶ button. 3. Select [Reset to default settings] , and ...
Page 52 - Force Update; OTA Update
Settings System Software upgrade The Software Upgrade menu allows you to upgrade the STB's software for performance improvement or additional services. \ Never turn the STB off during the upgrade process. \ When the upgrade is completed, the STB turns off and then turns on again by itself. \ SAMSU...
Page 53 - USB Update; Upgrade
Settings System ENG USB Update You can update the software by using a USB flash drive. 1. Visit www.samsung.com/de 2. Enter the product's model name into the search field. As you enter the model name, a drop down will display products that match the model name. 3. On the page that appears, click S...
Page 54 - Open source licenses
Settings System Change STB PIN-Code This function works in conjunction with the Parental Rating function which requires you to enter a PIN before it allows access. You can change the 4-digit PIN used to access the Parental Rating function. To change the PIN, follow these steps: 1. Press the MENU b...
Page 55 - WATCHING TV CHANNELS; Using the remote control buttons; sing the Basic Functions
ENG WATCHING TV CHANNELS After Auto scanning is completed, you can watch your TV channels. Using the remote control buttons To use these buttons, see the table on the right. 2 4 3 6 5 8 67 1 1 NUMBER buttons : To move to a TV channel directly, press the number buttons that correspond to the desired ...
Page 56 - Using the Basic Functions; Watching TV Channels; Volume control; Audio language; Subtitle language
Using the Basic Functions Watching TV Channels Switching channel You can switch the current channel by pressing the CH button or entering the channel number directly using the NUMERIC (0-9) buttons. • Press the TV/RADIO button to switch between TV channels and radio channels. • You can switch chan...
Page 57 - Viewing the service Information; VIEWING THE SERVICE INFORMATION; Channel Information
Using the Basic Functions Viewing the service Information ENG VIEWING THE SERVICE INFORMATION Pressing the INFO button displays a channel information. Pressing the INFO button on the remote control displays information about the channel being watched. Pressing the INFO banner twice makes more deta...
Page 58 - Display icons; Icon
Using the Basic Functions Viewing the service Information Display icons Icon Definition Icon Definition Favourite channel Dolby Digital Sound Lock channel Dolby Digital Plus Sound HD channel Audio description SD channel DVB Subtitle Parental Lock Digital text Watch timer New recording Record Timer...
Page 59 - Program Information; Signal Information
Using the Basic Functions Viewing the service Information ENG Program Information You can see the synopsis of current watching program by pressing the INFO button twice. • Press the EXIT button to close the banner. Signal Information You can see the signal information by pressing the INFO button t...
Page 60 - Viewing the EPG information; VIEWING THE EPG INFORMATION; Using the Timer
Using the Basic Functions Viewing the EPG information VIEWING THE EPG INFORMATION EPG (Electronic Program Guide) provides users with television, radio, and other media applications with continuously updated menus that display broadcast programming and scheduling information for current and upcomin...
Page 61 - Viewing Program information; Searching programs; TOOLS
Using the Basic Functions Viewing the EPG information ENG Viewing Program information 1. Select a channel in the EPG screen, and then press the INFO button on the remote control. 2. The program's detail information will appear in the banner on the screen. Searching programs You can search programs...
Page 62 - Pausing and rewinding live TV; PAUSING AND REWINDING LIVE TV; RETURN
Using the Basic Functions Pausing and rewinding live TV PAUSING AND REWINDING LIVE TV While watching live TV or listening live radio, after pressing p button the time shifting mode starts. This mode makes it possible to stop live mode, rewind and review the program that was recorded the moment bef...
Page 63 - Recording programs; RECORDING PROGRAMS; REC
Using the Basic Functions Recording programs ENG RECORDING PROGRAMS You can record a program not only whilst watching the desired program, but also after selecting the desired program from the information banner, the TV guide or the Search menu.To record TV channels or Radio programs, press the RE...
Page 65 - Channel list; CHANNEL LIST; Locking channels; Red; Favourites list; Yellow
Using the Basic Functions Channel list ENG CHANNEL LIST The Channel list displays the list of channels memorized and indexed during the Scanning process. On the Channel list screen, you can select and change channels, lock and unlock channels, view indexed channels by sort order (name, number), an...
Page 66 - Create new favourite channel list; Remove Favourite Channels
Using the Basic Functions Channel list Create new favourite channel list Add a channel to new favourite channel list. 1. In the Channel list, press the Yellow button. 2. Select the [Create new favourites list] , and then press the " button. The virtual keyboard appears. 3. Input the favourite ...
Page 67 - Sorting channel list
Using the Basic Functions Channel list ENG Sorting channel list To sort the channels in the Channel list. You can order the list by name or number. 1. In the Channel list, press the TOOLS button on the remote control. 2. Select the sort option you want, and then press the " button. 67
Page 68 - Using the HbbTV; USING THE HBBTV; RED
Using the Basic Functions Using the HbbTV USING THE HBBTV HbbTV(Hybrid Broadcast Broadband TV) is a major new pan-European initiative aimed at harmonizing the broadcast and broadband delivery of entertainment to end consumers through connected TVs and set-top boxes. If the satellite TV service pro...
Page 70 - external HDD to the USB port on the rear panel of the STB.; CONTENTS & TIMER LIST; Timer; Playback related buttons; Fast Forward; To select all/deselect all timers; sing the Library
This function launches the PVR contents list by using the [Library / Media] menu. Cyclic recordings can be browsed within their own folders. You may play a selected recording and browse through it using Rewind, Forward, Pause and Play. You can also delete selected recordings. If you want to use this...
Page 71 - Using the Library; Contents & Timer list; To delete the timer
Using the Library Contents & Timer list ENG To delete the timer 1. Select a timer by pressing the Yellow button on the remote control. 2. Press the TOOLS button on the remote control. 3. Select [Delete] on the pop-up window and press the " button on the remote control. To sort timers 1. Pr...
Page 72 - PLAYING FILES ON A USB DEVICE; edia Playback
Your STB can play the contents located on the USB devices. It is also possible to navigate through menus, selecting items, viewing information about items, browsing and playing/viewing an item. You can delete, copy, move, sort, select and deselect all items on the storage medium by pressing the TOOL...
Page 73 - Media Playback; Controlling Playback; CONTROLLING PLAYBACK; To delete the files
Media Playback Controlling Playback ENG CONTROLLING PLAYBACK You can control the playback of media file located on an external USB storage device. Depending on the contents, some of the functions described in this manual may not be available. • Press the p button on the remote control to pause or ...
Page 74 - To sort the files; To select all the files; To deselect all the files
Media Playback Controlling Playback To create a new folder 1. Press the TOOLS button on the remote control. 2. Select [New Folder] on the pop-up window, and then press the " button on the remote control. 3. Input the name of the new folder by using the ▲/▼/◀/▶ and " buttons on the remote c...
Page 75 - Using the DLNA; USING THE DLNA
Media Playback Using the DLNA ENG USING THE DLNA DLNA functionality gives you to share digital contents between STB and other multimedia devices, control the contents remotely and render the contents by using external device e.g. phone. The STB supports DLNA Media Player and DLNA Media Renderer de...
Page 76 - Network configuration
Media Playback Using the DLNA • Play files similarly to playback from USB or HDD. For more information about playback from USB or HDD, see 'Playing Files on a USB Device' on page 72. In the DLNA, Trick modes are not supported, audio jumps are limited to 15 second steps and files are not cached.DLN...
Page 77 - TROUBLESHOOTING; No operation can be performed with the remote control.; The screen aspect ratio cannot be changed.; Forgot password; ppendix
ENG TROUBLESHOOTING No operation can be performed with the remote control. y Check the batteries in the remote control. They may need replacing. y Operate the remote control at a distance of no more than 6.1 m. y Remove the batteries and hold down one or more buttons for several minutes to drain the...
Page 78 - If you experience other problems.; Abnormal HDMI output screen.; During the booting, ‘No signal’ screen keeps over one minute.; If TimeShift function using internal flash memory isn't working.
If you experience other problems. y Go to the table of contents and find the section of the user manual that contains the explanations regarding the current problem, and follow the procedure once again. y If the problem still cannot be solved, please contact your nearest Samsung authorized service c...
Page 79 - Specifications; SPECIFICATIONS; Optical Digital Audio
Appendix Specifications ENG SPECIFICATIONS Model Name ▪ GX-SM660SM General ▪ Net Weight: 0.6 Kg ▪ Dimensions: 240 (W) x 30 (H) x 174 (D) mm ▪ Operating Temperature Range: (0 °C to +45 °C) +32 °F to +113 °F ▪ Operating Humidity Range: 0 % to 90 % HDMI ▪ Video Output Resolution: 1080p, 1080i, 720p, ...
Page 80 - Licence; LICENCE; MANUFACTURER WORDING
Appendix Licence LICENCE • HDMI Product Notice - The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • Manufactured under license from Dolby Laboratories. Dolby, Dolb...
Page 81 - Network Service Disclaimer; NETWORK SERVICE DISCLAIMER
Appendix Network Service Disclaimer ENG NETWORK SERVICE DISCLAIMER All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your perso...
Page 82 - Allgemeine Geschäftsbedingungen HD+; ALLGEMEINE GESCHÄFTSBEDINGUNGEN HD+; Geltungsbereich, Vertragsgegenstand und HD+ Karte; Nutzerkreis und Nutzungsvoraussetzungen
Appendix Allgemeine Geschäftsbedingungen HD+ ALLGEMEINE GESCHÄFTSBEDINGUNGEN HD+ 1. Geltungsbereich, Vertragsgegenstand und HD+ Karte 1.1 Diese allgemeinen Geschäftsbedingungen der HD PLUS GmbH mit Sitz in der Betastraße 1-10, 85774 Unterföhring („HDP“) gelten ausschließlich für den HD+ Service. 1...
Page 83 - Servicepauschale / Laufzeit und Verlängerung des HD+ Services; Beachtung von Urheberrechten
Appendix Allgemeine Geschäftsbedingungen HD+ ENG 2.3 Eine uneingeschränkte, vollumfängliche Nutzung des HD+ Services ist nur bei der Verwendung von HD+ zertifizierten Digitalempfängern möglich. Bei der Verwendung von Digitalempfängern ohne HD+ Zertifizierung kann es zu technischen Nutzungseinschrä...
Page 84 - Freistellung; Gewährleistung
Appendix Allgemeine Geschäftsbedingungen HD+ 6. Freistellung 6.1 Der Nutzer haftet gegenüber HDP für die Einhaltung der in den Ziffern 4 und 5 aufgeführten Pflichten. Er stellt HDP von sämtlichen Ansprüchen Dritter frei, die infolge einer schuldhaften Verletzung dieser Pflichten und/oder schädigen...
Page 85 - Haftung; Kündigung des Vertrages und Änderung des HD+ Services; Schlussbestimmungen
Appendix Allgemeine Geschäftsbedingungen HD+ ENG 9. Haftung 9.1 HDP haftet nur, soweit HDP, ihren Erfüllungsgehilfen und/oder gesetzlichen Vertretern ein vorsätzliches oder grob fahrlässiges Verhalten zur Last fällt. 9.2 Bei leicht fahrlässig verursachten Schäden haftet HDP nur, wenn eine wesentli...
Page 86 - Limited Warranty to Original Purchaser; LIMITED WARRANTY TO ORIGINAL PURCHASER; EUROPÄISCHE GARANTIEKARTE
Appendix Limited Warranty to Original Purchaser LIMITED WARRANTY TO ORIGINAL PURCHASER Auf dieses Samsung-Produkt wird vom Hersteller eine vierundzwanzig-monatige Garantie gegen Material- und Verarbeitungsfehler gegeben. Die Garantiezeit beginnt mit dem Kauf des Gerätes beim Fachhändler.Sollte es ...
Page 87 - Open Source Announcement; OPEN SOURCE ANNOUNCEMENT
Appendix Open Source Announcement ENG OPEN SOURCE ANNOUNCEMENT Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English. DECLARATION OF CONFORMITY Hereby, Samsung Electronics, declares that this equip...
Page 88 - emo
Page 89 - WEEE SYMBOL INFORMATION; CORRECT DISPOSAL OF THIS PRODUCT; BATTERY SYMBOL INFORMATION; CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT
ENG For information on Samsung’s environmental commitments and product specific regulatory obligations e.g. REACH, WEEE, Batteries, visit: http://www.samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html Information in this document is proprietary to SAMSUNG ELECTRONIC...
