Page 2 - -1 Safety Precautions; Be sure that all of the built-in protective; Samsung Electronics
1. Precautions 1-1 Safety Precautions 1. Be sure that all of the built-in protective devices are replaced. Restore any missingprotective shields. 2. When reinstalling the chassis and its assemblies, be sure to restore all protectivedevices, including: nonmetallic control knobsand compartment covers....
Page 4 - -2 Servicing Precautions
1-2 Servicing Precautions 1. Servicing precautions are printed on the cabinet. Follow them. 2. Always unplug the unit’s AC power cord from the AC power source before attempting to:(a) Remove or reinstall any component or assembly, (b) Disconnect an electrical plug orconnector, (c) Connect a test com...
Page 5 - -3 Precautions for Electrostatically Sensitive Devices (ESDs)
1. Some semiconductor (“solid state”) devices are easily damaged by static electricity. Suchcomponents are called ElectrostaticallySensitive Devices (ESDs); examples includeintegrated circuits and some field-effect transistors. The following techniques willreduce the occurrence of component damageca...
Page 6 - Reference Information; -1 Tables of Abbreviations and Acronyms; Table 2-1 Abbreviations
Reference Information Samsung Electronics 2-1 2. Reference Information 2-1 Tables of Abbreviations and Acronyms AAhÅdBdBm °C°F°KFGGHzgHHzhipskWhkgkHzk Ω kmkm/hkVkVAkWIMHz AmpereAmpere-hourAngstromDecibelDecibel Referenced to OneMilliwattDegree CelsiusDegree Fahrenheitdegree KelvinFaradGaussGigahertz...
Page 7 - Table 2-2 Table of Acronyms
Reference Information 2-2 Samsung Electronics Table 2-2 Table of Acronyms ABLACACCAFAFCAFTAGCAMANSIAPCAPCA/VAVCBALBPFB-YCATVCBCCDCCTVChCRTCWDCDVMEIAESDESDFBPFBTFFFMFSGNDG-YHHFHI-FIICICIF Automatic Brightness LimiterAlternating CurrentAutomatic Chroma ControlAudio FrequencyAutomatic Frequency Control...
Page 10 - Note
Reference Information Samsung Electronics 2-5 SPEC VDP3108B VDP3112B VDP3120B VDP3132Y VDP3140D FUNCTION 50Hz Basic 50Hz, 2H Comb Filtr 50Hz, 2H Comb Filter, Horizontal Scaler 50Hz, 2H Comb Filter, DVD Input 100Hz REMARK Table 2-3-1 VIDEO IC (IC201S) SPEC MSP3400D MSP3410D MSP3411G FUNCTION Multista...
Page 11 - MEMO
Page 14 - Alignment and Adjustments; -1 General Alignment Instructions
Alignment and Adjustments Samsung Electronics 4-1 4. Alignment and Adjustments 4-1 General Alignment Instructions 1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation. Checkthe basic characteristics such as height, horizontal and vertical sync and focus. 2. Observe the ...
Page 15 - -5 SCREEN Adjustment
Alignment and Adjustments 4-2 Samsung Electronics 4-5 SCREEN Adjustment 1. Input Toshiba Pattern 2. Enter “Service Mode”.(Refer to “Service Mode”) 3. Select “G2-Adjust”. 4. Set the values as below. IBRM = 220WDRV = 35CDL = 220 COLR G B = 150 150 150 4-4 Dynamic Focus Adjustment 1. A dynamic focus ad...
Page 16 - When you do not have Toshiba Pattern, follow this method.; the “OSD” Color is red.
Alignment and Adjustments Samsung Electronics 4-3 5. Turn the SCREEN VR until “MRCR G B” and “MRWDG” are green and those value are about 100. (The incorrect SCREEN Voltage may result that “MRCR G B” and “MRWDG” should be red) When you do not have Toshiba Pattern, follow this method. 1. Set the TV on...
Page 17 - -7 White Balance Adjustment; Warm up the TV set at least for 30 minutes.
Alignment and Adjustments 4-4 Samsung Electronics 4-6 E 2 PROM (IC902) Replacement 1. When IC902 is replaced, all adjustment data revert to the initial values. So, all adjustment values when servicing should be readjusted. 2. After IC902 is replaced, connect the AC power supply cord. 3. Turn the pow...
Page 18 - -8 Factory Adjustment; - If you do not have Factory remote-control
Alignment and Adjustments Samsung Electronics 4-5 4-8 Factory Adjustment 1. To enter the “Service Mode”, Press the remote-control keys in this sequence : - If you do not have Factory remote-control - If you have Factory remote-control 2. After the Service Mode is entered, the initial screen is as sh...
Page 22 - “Soft Limit” is that Limitting
Initial Value 185 4 255 0 0 33 39 Alignment and Adjustments Samsung Electronics 4-9 OSD B stretch-BTHR B stretch-BTLT B stretch-BAM Coring RGB Bright RGB Contrast EHT Time EHT Compensation ✐ 4-8-2(E) VIDEO 3 ADJUST No. 1 2 3 4 5 6 7 OSD Peak Threshold Soft Limit Slope B Hard Limit Peak Video Ref Pea...
Page 23 - OSD; Refer to Note 5; Initial
Initial Value : Refer to Note 6 on the next page. Alignment and Adjustments 4-10 Samsung Electronics 4-8-2(E) OPTION No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 OSD Language Sound CRT AV Mode X-Ray Tilt Control Auto FM PIP Txt Language LNA Equalizer High Deviate TTX On/Off AV by CH key Function Arab, Iran,...
Page 26 - DESCRIPTION
Alignment and Adjustments Samsung Electronics 4-13 4-9-2 Pin Assignment Specification DESCRIPTION EEPROM Write Protection EEPROM Serial Data Line EEPROM Serial Clock Line Disable Micom IIC Peripheral IC Serial Data Line Peripheral IC Serial Clock Line MSP IC Initial Control VDP IC Initial Control TT...
Page 27 - PIN NO
Alignment and Adjustments 4-14 Samsung Electronics 4-9-2 Pin Assignment Specification (Continued) PIN NO 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 FUNCTION I/O N.C. GND Vdd N.C. N.C. Reset X-In X-Out GND Vdd R G B COR Vdd GND Vdd I/O I/O N.C. N.C. I/O I/O N.C. I/O...
Page 32 - Code No
6. Exploded View & Parts List 6-1 CS29A6WT8X/BWT Exploded View & Parts List Samsung Electronics 6-1 No Code No Description Specification Q’ty Remark 1 AA64-01222C CABINET FRONT ;29A6 KS3A PLANO,S704+B702 1 1-1 AA64-70117B BADGE-BRAND ;AL,SS,SILVER,L65,R2000,-,- 1 1-2 AA64-40516B WINDOW-REMOC...
Page 34 - Electrical Parts List
ASSY PCB MAIN(OPT) * AA94-02574GASSY PCB MAIN(OPT);CS29A5WT8X/XSG,KS3A,U C407 2301-001338 C-FILM,MPE-PPF;0.68nF,5%,1.6kV,TP,28x7x1 C820 2401-003076 C-AL;3300uF,20%,50V,WP,BK,18x35.5mm C-BLOC AA26-00069A TRANS FBT;FUJ-29C002C(S),DREAM3,4,-,-,-, CLAMP AA65-30018A CLAMP-WIRE;NYLON-66,-,-,DATL-600,DONG-...
Page 40 - REMOCON
SWY04 3404-000176 SWITCH-TACT;12V,50mA,120gf,6x6mm,SPST SWY05 3404-000176 SWITCH-TACT;12V,50mA,120gf,6x6mm,SPST SWY06 3404-000176 SWITCH-TACT;12V,50mA,120gf,6x6mm,SPST SCREW 6001-000057 SCREW-MACHINE;RH,+,M3,L6,ZPC(BLK),SWRCH1 PCB AA41-00299A PCB-CONTROL;CS29A5WT,FR-1,1L,A,1.6T,245x RMY01 AA59-60002...
Page 52 - Schematic Diagrams
TP01 TP02 TP07 TP03 TP06 TP08 TP09 TP10 TP05 TP04 10. Schematic Diagrams Samsung Electronics Schematic Diagrams 10-1 10-1 MAIN 1 TP07 TP08 TP09 TP10 TP01 TP02 TP03 TP04 TP05 TP06 : Power Line : Signal Line
Page 56 - l Li
10-5 PIP Samsung Electronics Schematic Diagrams 10-5 : Power Line Si l Li
Page 57 - SWITCH
Schematic Diagrams 10-6 Samsung Electronics 10-6 CRT, SWITCH SWITCH CRT : Power Line : Signal Line
Page 58 - ELECTRONICS; Printed in Korea
ELECTRONICS © Samsung Electronics Co., Ltd. AUG. 2000 Printed in Korea 3KS3A-2933