Ryobi TS1301- Manual
Ryobi TS1301– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 12 – aa; a a
- Page 13 – a a a
- Page 14 – aaa
OPERATOR'S MANUAL
10 in. (254 mm) Miter Saw
Model TS1301 -
Double Insulated
THANK YOU FOR BUYING A RYOBI MITER SAW.
Your new saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new saw.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your saw properly and only for what
it is intended, you will enjoy years of safe, reliable service.
Please fill out and return the Warranty Registration Card so we can be of future service to you.
Thank you again for buying Ryobi tools.
1
2
2
3
3
4
4
5
5
8
8
SAVE THIS MANUAL FOR FUTURE REFERENCE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Ryobi TS1301
Summary
Page 12 Fig. 7 Fig. 9 R es to re lo w er b la de gu ard an d s ec ure ly tig hte n s cre w befo re u se . DUST GUIDE UPPER BLADE GUARD EXHAUST PORT 6 7 8 1 2 3 4 5 6 7 8 WARNING: To prevent accidental starting that could cause possibleserious personal injury, assemble all parts, make sure alladjustm...
Page 13 a aa a aaa a a a a a a aa a aaa a a Restore lower blade guard and securely tighten screw before use. ■ Depress the spindle lock button and rotate the bladebolt until the spindle locks. See Figure 10. ■ Using the wrench provided, loosen and remove the bladebolt. NOTE: The blade bolt has left ...
Page 14 TABLE EXTENSIONS See Figures 13, 14, and 15. If you plan to use the stop block, slide the stop block on theback arm of the desired table extension first. See Figure 13. To install table extensions, insert the ends of extensions intothe holes in the sides of the base. See Figures 13 and 14. A...
