Ryobi TR30- Manual
Ryobi TR30– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – RULES FOR SAFE OPERATION; DOUBLE INSULATION
- Page 4 – READ ALL INSTRUCTIONS
- Page 5 – SAVE THESE INSTRUCTIONS
- Page 8 – ADJUSTMENTS; INSTALLING/REMOVING CUTTERS
- Page 9 – OPERATION; HOW TO OPERATE YOUR TRIMMER; FEED DIRECTION
- Page 12 – ACCESSORIES; HELPFUL HINTS
- Page 13 – MAINTENANCE; BRUSH REPLACEMENT; PROPER CARE OF CUTTERS
- Page 14 – DOUBLE INSULATED; • SERVICE; MODEL NUMBER
THANK YOU FOR BUYING A RYOBI LAMINATE TRIMMER.
Your new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire owner’s manual before using your new trimmer.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your trimmer properly and only for
what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
OWNER’S OPERATING MANUAL
LAMINATE TRIMMER - MODEL TR30
DOUBLE INSULATED
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Maximum Cutter Diameter
1-3/8 in. (34.9 mm)
Collet
1/4 in. (6.4 mm)
Horsepower
3/4
Rating
120 volts, 60 Hz AC only, 3.8 amperes
No Load Speed
23,000 RPM
Power Cord
10 ft. (3048 mm)
Net Weight
3.0 lbs. (1.4 kg.)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Ryobi TR30
Summary
Page 3 RULES FOR SAFE OPERATION DOUBLE INSULATION Your Ryobi power tool is double insulated. Double insulationis a concept in safety, in electric power tools, which eliminatesthe need for the usual three-wire grounded power cord. Allexposed metal parts are isolated from internal metal motorcomponent...
Page 4 15. SECURE WORK. Use clamps or a vise to holdwork. It's safer than using your hand and it freesboth hands to operate tool. 16. DON'T OVERREACH. Keep proper footing andbalance at all times. Do not use on a ladder orwith unstable support. 17. MAINTAIN TOOLS WITH CARE. Keep toolssharp at all tim...
Page 5 RULES FOR SAFE OPERATION (Continued) 27. I N S P E C T E X T E N S I O N C O R D S P E R I O D I -CALLY and replace if damaged. 28. KEEP HANDLES DRY, CLEAN, AND FREEFROM OIL AND GREASE. Always use a cleancloth when cleaning. Never use brake fluids,gasoline, petroleum-based products or any str...
