Ryobi DS11008- Manual
Ryobi DS11008– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – RULES FOR SAFE OPERATION
- Page 3 – Additional Rules for Safe Operation; SAVE THESE INSTRUCTIONS
- Page 4 – SYMBOLS
- Page 5 – FEATURES; OSCILLATING MOTION
- Page 6 – OPERATION; APPLICATIONS; INSTALLING SANDPAPER
- Page 7 – PREPARING FOR OPERATION; TO OPERATE
- Page 8 – MAINTENANCE; GENERAL
- Page 9 – OPTIONAL ACCESSORIES; OPTIONAL POLISHING PADS
- Page 10 – RYOBI DETAIL SANDER – MODEL NUMBER DS11008
- Page 11 – PARTS LIST
- Page 12 – Double Insulated; • SERVICE; RYOBI TECHNOLOGIES INC.; EXTENSION CORD CAUTION
OPERATOR'S MANUAL
DETAIL SANDER
MODEL DS11008
DOUBLE INSULATED
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Sanding Pad
Triangle shaped
No load speed
12,000 spm
Motion
Oscillating
Rating
120 volts, 60 Hz, AC
Input
.30 amperes
Paper type
Pressure sensitive adhesive backed
Arc size
3.0 mm at tip
THANK YOU FOR BUYING A RYOBI DETAIL SANDER.
Your new Detail Sander has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new sander.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your sander properly and only for what
it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Ryobi DS11008
Summary
Page 2 WARNING: Read and understand all instructions. Failure tofollow all instructions listed below, may result in elec-tric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area ■ Keep your work area clean and well lit. Clutteredbenches and dark areas invite accidents. ■ Do...
Page 3 Service ■ Tool service must be performed only by quali-fied repair personnel. Service or maintenanceperformed by unqualified personnel could result ina risk of injury. ■ When servicing a tool, use only identical re-placement parts. Follow instructions in Mainte-nance section of this manual. U...
Page 4 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and theexplanations with them, deserve your careful attention and understanding. The safety warnings do not bythemselves eliminate any danger. The instructions or warnings they give are not sub...
