Rosen EM-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Page 3 – This section will give a brief trouble shooting guide; NO REMOTE
Page 4 – Power; • Depress the power button on either the remote; Switching Channels; Mode; EM1 Quick Reference Guide; Your EM1 has the capability to have one auxiliary source; tuner module
Page 5 – User Remote controller; ler; Using the Remote Control; Master Remote Operations
Page 6 – About your EM1; Your Rosen EM1 has the following components:; Installing Your EM1; Client Remote Operations
Page 7 – • Locate the desired placement of components to; B. Mounting of Components; below. Be careful not to scar or damage cover.; Interface Cable Notice:
Page 8 – Table Top or Under Counter Mount; Installing Tuner module
Page 9 – • The EM1 is designed to mount in a round 3 1/2”
Loading the manual
38114 Rosen_cover.p65
8/3/01, 10:26 AM
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Table of Contents Section Page 1. Quick Reference Guide 1-2 2. About your EM1 System 3 3. Installation of your EM1 4-9 4. Using the Remote Control 10-11 5. Using Auxiliary Audio/Video Sources 12 6. Trouble Shooting Your EM1 13 7. Specifications 14 Page 14 7 Specifications • Power Supply: DC12V +/- 5...
Page 3 - This section will give a brief trouble shooting guide; NO REMOTE
Page 13 6 Trouble Shooting Your EM1 3 Installing Your EM1 This section will give a brief trouble shooting guide Please call Rosen Technical Support at 888-883-2790 forfurther information or technical support. • NO AUDIO - Check volume level. Check MUTE button. Check volume level on AUX. input. Check...
Page 4 - Power; • Depress the power button on either the remote; Switching Channels; Mode; EM1 Quick Reference Guide; Your EM1 has the capability to have one auxiliary source; tuner module
Page 1 Power • Depress the power button on either the remote control or the right side of the monitor to powerthe EM1 on. Switching Channels • Using either the remote control or the buttons onthe right side of the monitor, switch the channelsup or down as desired. Switching Inputs • To select the au...
Page 5 - User Remote controller; ler; Using the Remote Control; Master Remote Operations
1 EM1 Quick Reference Guide The User remote is used forday to day operation. It hasbasic functions such as: • Volume Up and Down and Mute • Channel Up and Down • Power On and Off • Mode Select Please refer to Section 4,Using the Remote Control, forfurther details. The intent of the Master remoteis t...
Page 6 - About your EM1; Your Rosen EM1 has the following components:; Installing Your EM1; Client Remote Operations
2 About your EM1 Your Rosen EM1 has the following components: • Fully adjustable 6.8” LCD, Infrared remote receiver, with audio speakers. Figure 1 • Cable ready EM-1 Tuner Module with auxiliary inputs. Figure 2 • Two remote controls (one user remote and one master remote) Figure 3 • One AC power ada...
Page 7 - • Locate the desired placement of components to; B. Mounting of Components; below. Be careful not to scar or damage cover.; Interface Cable Notice:
Page 4 3 Installing Your EM1 A. Getting Started • Locate the desired placement of components to ensure a proper fit. Make sure the monitor hasenough room for desired movement. Warning: Excessive moisture and condensation willdamage unit. Be sure your chosen location forthe interface box and monitor ...
Page 8 - Table Top or Under Counter Mount; Installing Tuner module
B. Mounting of Components (Cont.) Table Top or Under Counter Mount • Use the Mounting base plate as a template to mark mounting holes • Mount base plate to monitor using 6-32 screws provided • Select Appropriate cable • Route 15ft interface cable from j-box to desired Tuner module location. • Plug p...
Page 9 - • The EM1 is designed to mount in a round 3 1/2”
1 2 3 4 3 Installing Your EM1 1.4 screws 10-32 x 1 Fhp 100 degree2. # 10 washer ss 100 degree3. Mounting baseplate4. EM1 Main FPD Assembly Note :Mounting plate isonly used whenyou want tosurface mountyour EM1Interface cable Page 6 3 Installing Your EM1 C. Mounting on Wall to J-Box • The EM1 is desig...