Rosen EM-1 - Manuals - manualsarea.com

Page 2 - Table of Contents; Section; Quick Reference Guide; Specifications

Table of Contents Section Page 1. Quick Reference Guide 1-2 2. About your EM1 System 3 3. Installation of your EM1 4-9 4. Using the Remote Control 10-11 5. Using Auxiliary Audio/Video Sources 12 6. Trouble Shooting Your EM1 13 7. Specifications 14 Page 14 7 Specifications • Power Supply: DC12V +/- 5...

Page 3 - This section will give a brief trouble shooting guide; NO REMOTE

Page 13 6 Trouble Shooting Your EM1 3 Installing Your EM1 This section will give a brief trouble shooting guide Please call Rosen Technical Support at 888-883-2790 forfurther information or technical support. • NO AUDIO - Check volume level. Check MUTE button. Check volume level on AUX. input. Check...

Page 4 - Power; • Depress the power button on either the remote; Switching Channels; Mode; EM1 Quick Reference Guide; Your EM1 has the capability to have one auxiliary source; tuner module

Page 1 Power • Depress the power button on either the remote control or the right side of the monitor to powerthe EM1 on. Switching Channels • Using either the remote control or the buttons onthe right side of the monitor, switch the channelsup or down as desired. Switching Inputs • To select the au...

Page 5 - User Remote controller; ler; Using the Remote Control; Master Remote Operations

1 EM1 Quick Reference Guide The User remote is used forday to day operation. It hasbasic functions such as: • Volume Up and Down and Mute • Channel Up and Down • Power On and Off • Mode Select Please refer to Section 4,Using the Remote Control, forfurther details. The intent of the Master remoteis t...

Page 6 - About your EM1; Your Rosen EM1 has the following components:; Installing Your EM1; Client Remote Operations

2 About your EM1 Your Rosen EM1 has the following components: • Fully adjustable 6.8” LCD, Infrared remote receiver, with audio speakers. Figure 1 • Cable ready EM-1 Tuner Module with auxiliary inputs. Figure 2 • Two remote controls (one user remote and one master remote) Figure 3 • One AC power ada...

Page 7 - • Locate the desired placement of components to; B. Mounting of Components; below. Be careful not to scar or damage cover.; Interface Cable Notice:

Page 4 3 Installing Your EM1 A. Getting Started • Locate the desired placement of components to ensure a proper fit. Make sure the monitor hasenough room for desired movement. Warning: Excessive moisture and condensation willdamage unit. Be sure your chosen location forthe interface box and monitor ...

Page 8 - Table Top or Under Counter Mount; Installing Tuner module

B. Mounting of Components (Cont.) Table Top or Under Counter Mount • Use the Mounting base plate as a template to mark mounting holes • Mount base plate to monitor using 6-32 screws provided • Select Appropriate cable • Route 15ft interface cable from j-box to desired Tuner module location. • Plug p...

Page 9 - • The EM1 is designed to mount in a round 3 1/2”

1 2 3 4 3 Installing Your EM1 1.4 screws 10-32 x 1 Fhp 100 degree2. # 10 washer ss 100 degree3. Mounting baseplate4. EM1 Main FPD Assembly Note :Mounting plate isonly used whenyou want tosurface mountyour EM1Interface cable Page 6 3 Installing Your EM1 C. Mounting on Wall to J-Box • The EM1 is desig...