Rolls RP503 - Manual
Rolls RP503 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – LIMITED WARRANTY; IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCI-
- Page 3 – NOTE: THIS METER DOES NOT INDICATE INPUT OR OUTPUT LEVEL.
- Page 4 – OPERATION
RP503
TUBE CHANNEL
• Tube Mic Preamp
• Optical Compressor
• Equalizer
OWNERS MANUAL
ROLLS CORPORATION
SALT LAKE CITY, UTAH
7/01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INTRODUCTION Congratulations and thank you for purchasing the RP503 TUBE CHANNEL. We’re confident this unit will provide you with years of smooth, warm mic pre-am-plification and musical dynamics processing. Please take a moment to read this manual as it provides all the information needed to proper...
SPECIFICATIONS Input Impedance: 600 Ohms balanced 50K Ohms unbalanced (1/4”) Output Impedance: 50 Ohms TRS Balanced Max Input Level: -15 dBV XLR 600 Ohms +18 dBV 1/4” Max Gain: +65 dB Max Output Level: +22 dB Frequency Response 20Hz - 25kHz +/-3dB THD + Noise <0.1% typical Noise Floor - 75 dB Equ...
OPERATION When the RP503 has been properly connected, ensure the power switch is on and the Power LED is lit. MIC PREAMP SETTINGS For condenser microphones, press in the Phantom Power switch. Press the PAD switch in if you’re sending a line level (+4dB) signal into the RP503. This helps prevent over...
