Rolls RM70 - Manual
Rolls RM70 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
The RM70 is a single rack space mixer designed for the install/contractor market. It
is ideal for small clubs, restaurants, churches, or schools. The unit mixes three bal-
anced microphones with five stereo sources to mono or stereo balanced Main Out-
puts.
The XLR Microphone Inputs have Mic/Line level switches, a Mic/Loop Insert jack,
and individually switchable +12 VDC phantom power. Priority talkover is available
on one microphone for paging. When this function is engaged, the signal at Mic One
temporarily mutes the source signals - the other two mic signals are still present.
A Music-On-Hold function has been included for connection to an telephone
system. The signal present at Source 3 Input will be sent to the Music On Hold screw
terminal outputs. A Music On Hold level control has been provided to adjust the
volume of this function.
Each Microphone input has a level and tone control, and Bass and Treble controls
have been provided for all the sources. A Master Output Level control adjusts the level
of all mixed signals.
A Remote Volume output jack is provided for connection to a 100K ohm linear
taper potentiometer and used as an external master level control.
FEATURES:
• Three XLR Microphone Inputs
• Individually switchable phantom power
• Five Stereo Source Inputs, Four RCA and one front panel stereo 3.5mm
• Tone controls for each Mic Input / Bass and Treb
T
T
le controls for the Source Inputs
• Music-On-Hold function with rear-panel Level control
• 1/4" TRS Mic Insert jack
SPECIFICATIONS
Input Impedance:
Mic:
600
Ω
XLR balanced
Line:
22K
Ω
Source:
22K
Ω
gold plated RCA
Mic/Loop:
22K
Ω
1/4" TS unbal.
Max Input Level:
Mic:
-14 dBV Mic level
+20 dB Line levl
Source:
24 dBV
Max Gain:
Mic:
60 dB
Source:
26 dB
In/Out Connectors:
3: XLR, 4: Stereo RCA, 3: 1/4", 1: 3.5mm,
1 screw terminal
Phantom Power:
+12 VDC
Output Level:
+17 dBV max
Output Impedance:
51
Ω
Phase Shift:
<10 degrees, 20Hz to 20 kHz
Tone Controls (Sources):
+/-12 dB 100 Hz Bass
+/-12 dB 11kHz Treble
Tone Controls (Mic):
-3dB; 300 Hz C.W. 4 kHz C.C.W.
Tone Shelving Slope
6 dB / Octave
Max S/N ratio:
96 dB
Nose Floor:
- 80 dB
THD:
<.025%
CMRR:
>52 dB (Mic)
Size:
19" x 1.75" x 6"
(48.3 x 4.5 x 15 cm)
Weight:
5 lbs. (2.3 kg)
ROLLS Coporation
5968 South 350 West, Salt Lake City, UT, 84107
(801) 263-9053 FAX (801) 263-9068
[email protected] • www.rolls.com
RM70 Mic/Source Selector
10/31/06
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
