Ricoh o-fc1 - Manual
Ricoh o-fc1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Menu Screen
- Page 3 – Set the capture functions on the camera.; Tap; Shooting Images
- Page 5 – Caution; • Remote Capture cannot be used when the camera is used in
- Page 6 – Image View; Folder Display
- Page 7 – to return to the [Image; • Only JPEG files saved on this memory card can be displayed; Memo; • The location where the image is saved differs depending on; Checking the Image Information
- Page 8 – to return to the; Settings; Information
- Page 9 – • For security reasons, it is recommended that the memory; Communication Settings
- Page 11 – Using with an Unsupported Camera; Creating Control Images
- Page 12 – • After the control images are created, captured images can be; Image; Turning the Wireless LAN Function Off
- Page 15 – Trademarks; • Trek
• For details on how to insert the memory card into a camera and establish a wireless LAN connection
with a communication device, refer to the “User Guide [Setup]” included with this memory card.
• The screen illustrations in this guide are examples. The displayed screens may vary depending on the
device.
PENTAX O-FC1
User Guide [Operation]
This guide explains how to make use of remote control functions with
our cameras that are compatible with this memory card.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Select a function from the menu screen that appears in the browser. In the [Remote Capture] screen, the camera’s Live View image and buttons pertaining to shooting are displayed. t Memo • When the communication device is held in the landscape orientation, only 12, 13, 17, and 18 are displayed. u C...
3 1 Set the capture functions on the camera. 2 Connect the memory card to the communication device via wireless LAN. For information on how to establish a connection, refer to the “User Guide [Setup]”. 3 Start the browser on the communication device and display the menu screen. 4 Tap [Remote Capture...
5 u Caution • Remote Capture cannot be used when the camera is used in the following conditions.• When a drive mode other than Single Frame Shooting is set • During Movie mode• While adjusting a composition (Composition Adjustment)• During the USB/HDMI connection
