Ricoh o-fc1 - Manuals - manualsarea.com

Page 2 - Menu Screen

2 Select a function from the menu screen that appears in the browser. In the [Remote Capture] screen, the camera’s Live View image and buttons pertaining to shooting are displayed. t Memo • When the communication device is held in the landscape orientation, only 12, 13, 17, and 18 are displayed. u C...

Page 3 - Set the capture functions on the camera.; Tap; Shooting Images

3 1 Set the capture functions on the camera. 2 Connect the memory card to the communication device via wireless LAN. For information on how to establish a connection, refer to the “User Guide [Setup]”. 3 Start the browser on the communication device and display the menu screen. 4 Tap [Remote Capture...

Page 5 - Caution; • Remote Capture cannot be used when the camera is used in

5 u Caution • Remote Capture cannot be used when the camera is used in the following conditions.• When a drive mode other than Single Frame Shooting is set • During Movie mode• While adjusting a composition (Composition Adjustment)• During the USB/HDMI connection

Page 6 - Image View; Folder Display

6 Displays the images saved on the memory card on the communication device. 1 Tap [Image View] in the menu screen. Or, tap B in the [Remote Capture] screen.The [Image View] screen appears. u Caution • Do not operate the camera or capture images with the camera while viewing images using the Image Vi...

Page 7 - to return to the [Image; • Only JPEG files saved on this memory card can be displayed; Memo; • The location where the image is saved differs depending on; Checking the Image Information

7 Tap the thumbnail to display the image.Tap 1 to return to the [Image View] screen. u Caution • Only JPEG files saved on this memory card can be displayed as thumbnails. All other files are displayed as icons and these images cannot be viewed using the Image View feature. Touch and hold an image to...

Page 8 - to return to the; Settings; Information

8 1 In the menu screen, tap [Settings]. The [Settings] screen appears.Tap 1 to return to the previous screen.The following settings can be made. Tap [Information]. Communication Info and Version Info can be checked. Settings Information

Page 9 - • For security reasons, it is recommended that the memory; Communication Settings

9 Tap [Communication Settings]. SSID, Network Key (security code), and Channel Setting can be changed.SSID can be specified using 1 to 32 characters, Network Key with 0 or 8 to 63 characters. Characters that can be used are single-byte alphanumeric characters and “_” (underscore).If you change a set...

Page 11 - Using with an Unsupported Camera; Creating Control Images

11 A camera incompatible with this memory card does not have functions for turning the wireless LAN function on or off, or for resetting the communication settings. Therefore, this memory card cannot be controlled from the camera side.For use with a non-compatible camera, two types of images to cont...

Page 12 - • After the control images are created, captured images can be; Image; Turning the Wireless LAN Function Off

12 7 Turn the camera off and on again, and then establish a wireless LAN connection again. The control images shown below are created on the memory card. t Memo • After the control images are created, captured images can be saved in the normal way. If you accidentally delete either one or both of th...

Page 15 - Trademarks; • Trek

15 Trademarks • Trek ® and FluCard ® are trademarks or registered trademarks of Trek Group of Companies in Singapore and/or other countries. • SDHC Logo is a trademark of SD-3C, LLC.• All other trademarks are the property of their respective owners.