Remington 476 - Manual
Remington 476 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Precautions; BEFORE USING
- Page 3 – WARNING
- Page 4 – HANDLING THE TOOL
- Page 7 – TOO SOFT; Start; TOO BRITTLE
- Page 9 – YES
- Page 10 – OPERATING THE TOOL
- Page 11 – WATER
- Page 15 – LOAD; Shank
- Page 16 – Operation
- Page 17 – LOADING; Continued
- Page 18 – OVERDRIVE
- Page 19 – Limited Warranty; For information about this warranty contact:
- Page 20 – Accessories; Description; Goggles; CAUTION
REMINGTON
®
POWERHAMMER
Model 476
Operating
Instructions
The Remington Powerhammer is de-
signed for use with Remington Powder 22
caliber, Type A crimped loads and
Remington Power Fasteners which are
n o l o n g e r t h a n 6 3 . 5 m m ( 2 1 / 2 ” ) .
Remington Power Fasteners are manu-
factured from special steel and heat
treated to produce a very hard, yet duc-
tile, fastener.
CAUTION:
Always use Remington 22 caliber Type A
crimped loads or loads manufactured to
specifications outlined in the P.A.T.M.I.
“Technical Data Pertaining to Powder
Loads (Boosters)”, latest revision. Use of
loads other than those conforming to
these specifications may cause load-
ejection problems or damage the tool.
Read this manual and all labels carefully
before operating your powder actuated
tool. This manual should always accom-
pany the tool and be transferred with it
upon change of ownership.
WARNING ICON
G 001
WARNING: This tool is designed
only for use by qualified operators. Quali-
fication is obtained through a thorough
understanding of the
Safety Warnings
and operating instructions as defined in
this operating manual.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 WARNING: Safety Precautions BEFORE USING 1. ALWAYS handle the tool as if itwere loaded. Before starting work,check that the tool is unloaded andthe muzzle is clear. NEVER load atool unless it is going to be used. 2. ALWAYS inspect to make sure thetool is working properly. If the tooldoes not work ...
3 Safety Precautions DEFECTIVE WARNING POWDERACTUATEDTOOLSIN USE! G 018 G 018
4 Safety Precautions HANDLING THE TOOL 1. NEVER place your hand over themuzzle. Accidental discharge cancause serious injury. 2. ALWAYS store UNLOADED pow-der actuated tool and loads in alocked container. Keep powderloads of different power levels inseparate containers. 3. NEVER carry or pass a load...
