Remii 50-BAY-SLIM - User Manual
Remii 50-BAY-SLIM Fireplace – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Remii
- Page 3 – IMPORTANT INSTRUCTIONS
- Page 4 – UNPACKING AND TESTING APPLIANCE; Carefully remove the appliance from the box.; GROUNDING APPLIANCE; the fireplace. Before installation consider the following:
- Page 9 – cm
- Page 10 – SAFETY DRILL SCREW AREA; There is a safety drill screw area as show below.; HARD- WIRE INSTALLATION; should service and repair this electric appliance.
- Page 11 – neutral wire into “N” and the ground wire into “G”.; FOR BATHROOM USE; used it must be readily accessible.
- Page 12 – Height is measured from the base of the fireplace.; OUTDOOR INSTALLATION; The
- Page 13 – INSTALLATION; your local builder before you install this appliance.
- Page 19 – MEDIA OPTIONS; -The Bay Slim series models are shipped with a 10
- Page 20 – AUTO MODE
- Page 21 – REMOTE CONTROL OPERATION; bottom left hand side is at position I.; MOOD LIGHT ON/OFF button; : Switching the color of the mood light.; FLASH button; : Press the high button to switch the heater to high heat setting
- Page 22 – INSTALLING WALL THERMOSTAT; WALL THERMOSTAT WIRING DIAGRAMS; Remove cover plate located on the left side of appliance.
- Page 23 – This list contains replacement parts; REPLACEMENT PARTS
- Page 24 – are not shown in
- Page 25 – EXPLODED VIEW
- Page 26 – Wiring Diagram
- Page 28 – SERVICE HISTORY; This heater must be serviced annually depending on usage.; Date
INSTALLATION AND OPERATION INSTRUCTIONS
30-
BAY
SLIM
40-
BAY
SLIM
50-
BAY
SLIM
60-
BAY
SLIM
72-
BAY
SLIM
SAFETY INFORMATION
WARNING
If the information in these instructions are
not followed exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
APRIL 2021 EDITION -VERSION 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
IMPORTANT INSTRUCTIONS ......................................................................................................................................... 3 UNPACKING AND TESTING APPLIANCE ............................................................................................................
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) ...
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. Test all aspects of its operation (manual switches...
