Remii 102755-XT - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS

2 TABLE OF CONTENTS Please read and carefully follow all of the instruction found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Remii p...

Page 3 - IMPORTANT INSTRUCTIONS

3 IMPORTANT INSTRUCTIONS Read all instructions before installing or using this heater. 2. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet from the front of the heater; keep them away from sides and rear as well. 3. Always unplug heater wh...

Page 4 - INSTALLATION

4 UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. GROUNDING APPLIANCE This appliance is for use on...

Page 8 - SAFETY DRILL SCREW AREA; HARD- WIRE INSTALLATION; shown below. Unscrew and remove power cord.

SAFETY DRILL SCREW AREA There is a safety drill screw area as show below. Please make sure that the fix screws are in this area. T h e m a n u a l c o n t r o l p a d p o s it io n S a f e t y d r i ll s c r e w a r e a ( D a r k a r e a ) HARD- WIRE INSTALLATION Turn off the appliance completely an...

Page 9 - FOR BATHROOM USE; NOT

2. Attach the wiring to the junction block. Please make sure the live wire goes into the “ L ” , the neutral wire into “ N ” and the ground wire into “ G ” . 3. Put the plate back and screw back. FOR BATHROOM USE 9 If this unit is installed in a bathroom it must be protected by a GIF receptacle or c...

Page 10 - OUTDOOR INSTALLATIONS

!"#$% &&'()&&$*$+, -( , .&$$% &'&/0**$+, -1* 0( 10 OUTDOOR INSTALLATIONS The 102745-XT, 102755-XT and 102765-XT electric fireplaces are suitable for installation in outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and...

Page 11 - The rough wall opening size of the fireplace:

11 INSTALLATION The rough wall opening size of the fireplace: W( ＂ ) D( ＂ ) H( ＂ ) 102745-XT 45 12 1/2 30 102755-XT 55 12 1/2 30 102765-XT 65 12 1/2 30 1. Take out the unit from the box. Please do the pre-test before you install the fireplace. Pull out the optional trim from the unit as shows below....

Page 16 - Media Options; FIRE GLASS MEDIA-LOG INSTALLATION

16 Media Options Canyon brown Ocean blue FIRE GLASS MEDIA-LOG INSTALLATION 1. Take off the front clear glass. There is a bracket that holds the front glass as shows below. Unscrew the screw to take off the bracket. Turn around the bracket and insert it into the gap tohook and pull out the glass. The...

Page 17 - combination of fire glass media that you find most appealing.

17 2. Install the fire glass media. Pour the fire glass media into the try. Feel free to use any combination of fire glass media that you find most appealing. 3. Put back the front glass after you finish the fire glass decoration.

Page 18 - AUTO MODE

18 OPERATION The fireplace can be operated either by the switches located on the left bottom of the fireplace unit or by supplied remote control. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION 1. The main power ON/OFF switch in position O, the fireplace is OFF.2. When main power ON/O...

Page 19 - REMOTE CONTROL OPERATION; : Adjust the blue color brightness of flame and tray.; MOOD LIGHT ON/OFF button; : Switching the color of the mood light.; FLASH button; : Press the high button to switch the heater to high heat setting

19 REMOTE CONTROL OPERATION For remote to function make sure the heater is plugged in and main power switch located on the bottom left hand side is at position I. When operating the remote make sure you point the remote to the centre of the fireplace and make sure each time you press the button t he...

Page 20 - INSTALLING WALL THERMOSTAT; WALL THERMOSTAT WIRING DIAGRAMS; Turn off circuit breaker.

20 INSTALLING WALL THERMOSTAT WALL THERMOSTAT WIRING DIAGRAMS Wire the wall thermostat prior to installing the fireplace. WALL THERMOSTAT WIRING(24 VAC) Install Wall Thermostat per instructions provided with kit and per the following information: 1. Turn off circuit breaker. 2. Remove cover plate lo...

Page 21 - REPLACEMENT PARTS; This list contains replacement parts

21 REPLACEMENT PARTS This list contains replacement parts NO DESCRIPTION QTY. 102745-XT 102755-XT 102765-XT 1 602030C 602030C 602030C BLOWER AND HEATER ASSEMBLY 1 2 FIREPLACE BOX 3 10104010 SWITCH 1 4 601036 CONTROL PANEL 1 5 601092C CIRCUIT BOARD 1 6 10101225 FLAME MOTOR 2 7 3134504 3136504 3138504...

Page 22 - EXPLODED VIEW

Page 24 - SERVICE HISTORY; This heater must be serviced annually depending on usage.

24 SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Name Service technician Name Service Performed Special Concerns NOTES: