Regency U20 - Manual

Regency U20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – TABLE OF CONTENTS; U20/E21 GAS INSERT ZERO CLEARANCE KIT; CONTENTS
Page 3 – Specifications; INSTALLATION; LISTINGS AND CODE APPROVALS
Page 4 – PARTS; Sold Separately:; GENERAL INFORMATION; Clearances to Combustibles for Insert; A non-combustible mantel may be installed
Page 5 – LOCATING YOUR U20/E21 FIREPLACE; FRAMING; ) The appliance may be
Page 6 – KIT ASSEMBLY; Parts; ) Lay the Base Assembly on a flat surface.
Page 7 – Variable Chimney Routes; VENTING; NOTE: Cold Climate Installation
Page 8 – INSERT INSTALLATION
Page 9 – OPTIONAL OUTSIDE COMBUSTION AIR SUPPLY INSTALLATION; ELECTRICAL SUPPLY
Page 11 – Diagram 4; FINISHED FACING

Loading the manual

908-037

01/15/04

Owners &
Installation

Manual

Fireplace Products International Ltd.
6988 Venture St., Delta, B.C.
Canada, V4G 1H4

Tested by:

Warnock Hersey:

Masport Head Office - Australia
54 Boundary Rd. Braeside
P.O. Box 553
Mordialloc 3195
Ph. (03) 9586-7777
Fax. (03) 9586-2980

FOR YOUR SAFETY
What to do if you smell gas:

Do not try to light any
appliance

D o n o t t o u c h a n y
electrical switch: do not
use any phone in your
building.

Immediately call your
g a s s u p p l i e r f r o m a
n e i g h b o u r ' s p h o n e .
Follow the gas supplier's
instructions.

If you cannot reach your
gas supplier, call the fire
department.

WARNING:

Improper installation, adjustment,
alteration, service or maintenance
can cause injury or property damage.
Refer to this manual. For assistance
or additional information consult an
authorized installer, service agency
or the gas supplier.

FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapours and liquids in
the vicinity of this or any other
appliance.

Installation and service must be
performed by an authorized installer,
service agency or the gas supplier.

U20/E21 GAS INSERT

ZERO CLEARANCE KIT

KIT # 530-936

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

Australian Heating Distributors
10/46 James St.,

Guildford, Western Australia 6055

Masport Head Office - New Zealand
1-37 Mt Wellington Hwy.Panmure,
P.O. Box 14349
Auckland 6.
Ph. (9) 570-9009
Fax. (9) 527-1294

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; U20/E21 GAS INSERT ZERO CLEARANCE KIT; CONTENTS

2 U20/E21 Gas Insert Zero Clearance Kit TABLE OF CONTENTS U20/E21 GAS INSERT ZERO CLEARANCE KIT CONTENTS PAGE Listings & Code Approvals .................................................. 3 Specifications ....................................................................... 3 General Informatio...

Page 3 - Specifications; INSTALLATION; LISTINGS AND CODE APPROVALS

3 U20/E21 Gas Insert Zero Clearance Kit Specifications INSTALLATION LISTINGS AND CODE APPROVALS This gas component has been tested in accordance with National Safety Standards, and has been certified byWarnock Hersey for installation and operation in the United States, Canada, Australia, and New Zea...

Page 4 - PARTS; Sold Separately:; GENERAL INFORMATION; Clearances to Combustibles for Insert; A non-combustible mantel may be installed

4 U20/E21 Gas Insert Zero Clearance Kit PARTS Included with Kit: 1 Main Body Assembly (5 pieces) 1 Faceplate Top Insulation 1 Zero Clearance Top Louver Assembly Sold Separately: (Rq)=Required (Rq) 1 402-918 Faceplate 40-1/4"W x 26-1/4"H(1020mm W x 665mm H)c/w faceplate trim. (Rq) 1 532-926 4...