RCA ANT751 - Manual
RCA ANT751 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – &INDTHE5BOLTANDMASTCLAMPINSERTSEE; Step 5: Install the transformer and coaxial; !TTACHTHETRANSFORMERTOTHECOAXIALDOWNLEADNOTINCLUDED
- Page 3 – &INALLYTIGHTENTHEHEXNUTSTOSECURETHELEADS; Step 6: Insert end caps; &INDTHEENDOFTHEMOUNTINGPIPEWITH
- Page 4 – Secure the foot to its permanent location.
- Page 5 – 2 Month Limited Warranty
ANT751
Outdoor Antenna
User’s Guide
Step 1: Unpack
Remove the antenna and the hardware bag from package. Make sure the
following parts are in the package:
s !NTENNA
s -OUNTINGPIPEANDFOOT
s (ARDWAREBAG
U-Bolt
v(EXNUTS
Mast Clamp Insert
v(EX.UTS
(2) Black Plastic Plugs
(2) 5/8” Bolts
Matching Transformer
2 1/2” Screw
(4) 7/16” Washers
Starting from the rear of the antenna, unfold
the elements on both the top and bottom of the
antenna until they lock into place (as illustrated
below). Make sure the elements are flat and
parallel to each other when you’ve finished.
BEFORE YOU START!!!
0LEASEREADTHE)-0/24!.43!&%49).&/2-!4)/.SHEET
included in this package.
Step 2: Unfold the antenna’s elements
Rear
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Step 3: Unfold the tetrapole Make sure the tetrapole locks into place. Do not attach the downlead yet! Note: VHF elements have been removed from this illustration to show the tetrapoles more clearly. Tetrapole Step 4: Attach the mast clamp insert &INDTHE5BOLTANDMASTCLAMPINSERTSEE the illustratio...
Make sure to place the leads of the matching transformer between the two washers on each post as shown here. &INALLYTIGHTENTHEHEXNUTSTOSECURETHELEADS Step 6: Insert end caps Insert the plastic end caps in the ends of the booms as shown here. Use a rubber mallet to gently tap them into the antenn...
Step 9: Attach the antenna to the mast IMPORTANT: Before you attach the antenna to your mast, visit www.antennaweb.org to see the locations of your local broadcast towers. This information is crucial in pointing your antenna correctly. Loosen the nuts on the mounting clamp U-bolt. Point the small en...
