Razor E300 - Manual
Razor E300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – BEFORE YOU BEGIN; DO NOT USE NON-RAZOR; Required Tools; OR MAINTENANCE PROCEDURES.; Estimated Assembly and Set-Up Time; at
- Page 4 – Attaching the Handlebars; located inside the end of; Inflating the Tires; Always inflate tires to the correct PSI before first time use.; Front Tire
- Page 5 – USAGE; Starting the Scooter
- Page 6 – CHARGING BATTERY; LED Light; OFF
- Page 7 – REPAIR AND MAINTENANCE; Turn power switch “OFF” before beginning repair or maintenance:; Adjusting the Brakes; Chain and Rear Tire Replacement; Disassembly
- Page 8 – Front Tire Replacement; Reassembly
- Page 10 – TROUBLESHOOTING GUIDE
- Page 13 – Razor Limited Warranty; WARRANTY
OWNER’S MANUAL
Read and understand this entire manual before riding!
DO NOT RETURN TO STORE!
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
v1_07_12
Please have your 19 digit product I.D. code ready before contacting Razor for
warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
BEFORE YOU BEGIN 2 WARNING: DO NOT USE NON-RAZOR PARTS WITH YOUR RAZOR ELECTRIC SCOOTER. The scooter has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Cer...
3 ASSEMBLY AND SET-UP q Attaching the Handlebars Tools required: 5 mm Allen wrench. 1 Use the valve extender located inside the end of the right handlebar grip. 2 Open the round cover located on the chain cover by sliding the cover upward. Align the opening in the drive sprocket with the valve stem....
USAGE q Starting the Scooter To start unit, turn on power switch and twist throttle with both hands on the handlebar. E300 E300 q Stopping the Scooter To stop unit, release the throttle and apply the brake until the unit comes to a complete stop. ASSEMBLY AND SET-UP q Attaching the Seat (E300S Only)...
