Razor 300001-SL - Manual
Razor 300001-SL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – BEFORE yOU BEGIN; Required Tools; at; Estimated Assembly and Set-Up Time; Razor recommends assembly by an adult.
- Page 4 – Attaching the Steering Wheel
- Page 5 – Adjusting Chain Tension
- Page 6 – Replacing the Wheels; Charger; Charging the Battery
- Page 8 – REPAIR AND MAINTENANCE
- Page 9 – TROUBLESHOOTING GUIDE
- Page 11 – GROUND FORCE PARTS
- Page 13 – WARRANTy; Loose Parts; SAFETy REMINDERS; DO NOT RETURN TO STORE; Do not use this product for the first time until you
Owner’s Manual
Read and understand this entire manual BEFORE riding!
For assistance contact Razor. DO NOT RETURN TO STORE.
Item Number:
300001-SL
NOTE: Manual illustrations are for demonstration purposes only. Illustrations
may not reflect exact appearance of actual product. Specifications subject to
change without notice.
Version: 1_9/11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
BEFORE yOU BEGIN 2 WARNING: DO NOT USE NON-RAZOR PARTS WITH YOUR GROUND FORCE. The Ground Force has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame and all other parts. Certain afterm...
Turn power switch off before conducting any maintenance procedures. 1 Using a 5mm Allen wrench, loos- en and remove the screw located in the steering column. 2 Make sure wires are not tangled. Insert the steering wheel, washer and screw into the steering column as shown. 3 Tighten screw securely usi...
4 Turn power switch off before conducting any maintenance procedures. 1 Using a 16mm open wrench, loosen the chain jack-screw locknut (B) and tighten or loosen the adjust- ing bolt (A) to tighten or loosen the chain as needed. Note about chain adjustment: The chain should not be under tension nor fl...
