Razor 13111290 - Manual
Razor 13111290 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SafETy WaRNINgS
- Page 4 – Estimated assembly and Set-Up Time; BEfORE yOU BEgIN; Required Tools; at
- Page 5 – attaching the Handlebars; Inflating the Tire; OFF
- Page 6 – CONNECTORS/HaRDWaRE MaINTENaNCE; Do not use this product for the first time until you have inflated
- Page 7 – REPaIR aND MaINTENaNCE; adjusting the Brakes
- Page 8 – Chain and Rear Wheel Replacement; When to Replace the Spark Cartridge
- Page 10 – TROUBLESHOOTINg gUIDE; Scooter must be traveling 3mph
- Page 12 – PaRTS
- Page 14 – Razor Limited Warranty; WaRRaNTy
Owner’s Manual
Read and understand this entire manual before riding!
DO NOT RETURN TO STORE!
NOTE:
The eSpark must be traveling up to 3mph before motor will engage. Kick start
up to 3mph while twisting the throttle to engage motor.
13111290
Item Number:
NOTE: Manual illustrations are for demonstration purposes only. Illustrations
may not reflect exact appearance of actual product. Specifications subject to
change without notice.
v.1_07-11_US
™
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PROPER RIDINg aTTIRE Always wear proper protective equipment such as an approved safety helmet (with chin strap securely buckled), elbow pads and kneepads. A helmet may be legally required by local law or regulation in your area. A long-sleeved shirt, long pants, and gloves are recommended. Always w...
Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the scooter was 95 percent assembled and packed at the fact...
4 aSSEMBLy aND SET-UP q attaching the Handlebars Charger q Inflating the Tire The front tire is inflated when shipped but it invariably may lose some pressure between the point of manufacturing and your purchase. 1 Using a bicycle style tire pump equipped for a Schrader- type valve, inflate the fron...
