Razor 25143060 - Manual
Razor 25143060 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Always check and obey any local laws or regulations which; saFety warnings
- Page 3 – estimated assembly and set-up time; BeFOre yOu Begin; required tools
- Page 4 – inflating the tires; Inflate the tires to the correct PSI before first time use.; testing the Brake
- Page 5 – mm; BeFOre riDing; charging the Battery; OFF; adjusting the Brake; OFF
- Page 6 – replacing the Fuse
- Page 7 – chain and sprocket
- Page 8 – trOuBlesHOOting guiDe; problem
- Page 9 – Dirt QuaD parts
- Page 11 – razor limited warranty; warranty; Tire Inflation; DO nOt return tO stOre; Failure to follow these instructions may damage
Dirt QuaD
Owner’s Manual
read and understand this entire manual before using!
For assistance contact razor. DO nOt return tO stOre.
Item Number:
25143060
nOte: Manual illustrations are for demonstration purposes only.
illustrations may not reflect exact appearance of actual product.
specifications subject to change without notice.
Version1_04-11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
WARNING: Riding an electric four wheeler can be a hazardous activity. Certain conditions may cause the equipment to fail without fault of the manufacturer. Like other electric products, the Dirt Quad can and is intended to move, and it is therefore possible to lose control, fall off and/or get into ...
Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the Dirt Quad is 95 percent assembled and packed at the fac...
asseMBly anD set-up 1 Using the 6mm Allen wrench, remove bolts from handlebar clamp. Note: Handlebar clamps are located in the plastic bag with owner’s manual and charger. 2 Place handlebars in handle- bar clamp in upright, vertical position. 3 Insert bolts and tighten securely. When properly tighte...
