Raypak 330/331 - Manual
Raypak 330/331 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – CONTENTS; Pay Attention to These Terms
- Page 4 – Mounting the Assembly; Follow these instructions if the Power Vent
- Page 7 – LEFT SIDE; DIAMETER
- Page 8 – for which it is sized.
- Page 13 – Model
- Page 14 – EMERGENCY SHUTDOWN: SHUT OFF ALL; Draft Proving Switch; NEGATIVE PRESSURE
- Page 15 – Illustrated Parts List
INSTALLATION & OPERATING
INSTRUCTIONS
CATALOG NO. 6000.57G
Effective: 05-27-10
Replaces: 12-12-08
P/N 241086 Rev. 8
WARNING:
If these instructions are not followed exactly, a fire or explosion may
result causing property damage, personal injury or death
.
FOR YOUR SAFETY:
Do not store or use gasoline or other flammable vapors and
liquids or other combustible materials in the vicinity of this or any other appliance. To
do so may result in an explosion or fire.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or
the gas supplier.
This manual should be maintained in legible condition and kept adjacent to the heater or in another safe place for
future reference.
For 181/182, 260/261, 330/331 &
400/401 – Boilers & Water Heaters
D-2
Power
Vent
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 3 Pay Attention to These Terms 3 Receiving Equipment 4 General Specifications 4 Installation 4 Mounting the Assembly 4 Wiring a Power Vent Assembly to an Appliance with IID Ignition 7 Venting 7 Wiring Diagrams 9 182-260 H4/WH1 (Atmospheric) 9 181-261 H4/WH1 (Low NOx) 10 330-400 H4/WH1 (Atmo...
Receiving Equipment On receiving your equipment, check the carton visual- ly for external damage. If the carton is damaged, make a note on the Bill of Lading when signing for the equip- ment. Remove the complete assembly from the carton if it is damaged, and report the damage to the carrier immediat...
7 Wiring a Power Vent Assembly to an Appliance with IID Ignition Venting The vent pipe must be the same size or one size larg- er than what is indicated. The D-2 Power Vent is capable of 360-degree discharge rotation and oper- ates with a positive vent static pressure and with a vent gas temperature...
