Rangemaster WP29M - Manual - manualsarea.com

Page 3 - INTERIOR BLOWERS

HL0081 - 3 - Model 415 (7” round adjustable elbow) Model 427 (4½” x 1 8 ½” to 10” Round, 6” high - lateral Model 423 (4½” x 1 8 ½” to 10” Round - vertical Model 424 (4½” x 1 8 ½” to 10” Round - horiz. front/rear Model 454 (4½” x 1 8 ½” to 10” Round - horiz. /right Model 453 (4½” x 1 8 ½” to 10” Roun...

Page 4 - IN-LINE AND EXTERIOR BLOWERS

- 4 - HL0082 - WP29M SERIES RANGE HOOD SYSTEM - IN-LINE AND EXTERIOR BLOWERS In-line and exterior blower rough-in kit(included with EB6, EB9, EB12, EB15,ILB3, ILB6, ILB9 and ILB11 blowers.) Model 41 8 10” Round adjustable elbow (optional) Model ILB3 (2 8 0 cfm) in-line blower (includes one 8 ” to 10...

Page 5 - SELECT BLOWER OPTION AND INSTALLATION TYPE

- 5 - 1. SELECT BLOWER OPTION AND INSTALLATION TYPE 1.2 D UCTED I NSTALLATION For a ducted installation, either an interior or exterior blower or in-line blower may be used with this hood. The Best WP29MSeries must be installed with blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or E...

Page 6 - MINIMUM AND MAXIMUM DISTANCE; WARNING

Remove the installation kit from inside the hood. Make sure that the following items are included: - Wood strip (screwed on back of hood) - Installation manual - Accessories including: • Evolution™ hybrid baffle filters (3 for hoods up to 54” width, 4 for 60” width)• Shielded halogen lights (GU10 ty...

Page 7 - INSTALL WOOD MOUNTING STRIP; CAUTION; INSTALL THE FLUE AND/OR THE FLAT TOP COVER; AEWP S

- 7 - 6. INSTALL WOOD MOUNTING STRIP Measure and mark a level line on wall above cooktop location for the woodmounting strip (see illustration beside and under step 2). Remove wood mountingstrip from back of hood. Use no. 10 - 2’’ flat head screws to secure the mounting strip to the drywall. Makesur...

Page 8 - INSTALL THE ROUGH-IN PLATE TO THE HOOD; SELECT BLOWER OPTION; CONNECT THE WIRING

- 8 - 11. INSTALL THE ROUGH-IN PLATE TO THE HOOD (ALL INSTALLATIONS) 11.1 A LL I NSTALLATIONS : Run power cable to installation location. Refer to the instructions included with the selected blower/rough-in kit (sold separately) for details on installing the rough-in plate. Install the rough-in plat...

Page 9 - INSTALL THE BLOWER; Do not plug the two cords into each other.

- 9 - 13.INSTALL THE BLOWER (INTERIOR OR EXTERIOR BLOWER) Refer to instructions included with blower. Once the blower is installed, plug the blower cord ( A ) into the female receptacle and the power supply cord ( B ) onto the male connector inside the hood. HE007 8 WARNING Do not plug the two cords...

Page 10 - LIGHT BULBS REPLACEMENT

- 10 - 16.LIGHT BULBS REPLACEMENT This hood must use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (included). WARNING In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed fixtures. ! WARNING In order to prevent...

Page 11 - HEAT SENTRYTM; WARRANTY

- 11 - 18.OPERATION Always turn ON your hood before you begin cooking in order to establish an air flow in the kitchen. Let the blower run for a fewminutes to clear the air after you turn off the range. This will help keep the whole kitchen cleaner and brighter. 1. ON/OFF Blower switch 3. ON/OFF Hal...

Page 12 - SERVICE PARTS

- 12 - SERVICE PARTS KEY PART QTY. (HOOD WIDTH) NO. NUMBER DESCRIPTION 30’’ 36’’ 42’’ 4 8 ’’ 54’’ 60’’ 1 SV16569 L AMP S HELL , S OCKET AND T RIM A SS ’ Y 4 4 4 6 6 6 2 SV05921 S HIELDED H ALOGEN B ULBS (50 W, 120 V, PAR16, GU-10) 4 4 4 6 6 6 3 SV03501 R OTARY C ONTROL 2 2 2 2 2 2 4 SV076 8 9 T OGGL...

Rangemaster WP29M - Manual

Table of Contents:

Summary

Other Rangemaster Models