Rangemaster RC60 - Manual

3 2. Hob Overview The ceramic hob comprises of four cooking zones containing heating elements with different ratings and diameters (Fig.2-1), each with a residual heat indicator. Each zone is controlled via the touch sensitive controls with an audible signal when operated. The Hob Use only pans that ...

5 To reduce the power to a cooking zone select the required zone, as indicated by the red dot in the display. Press the ‘–‘ key to reduce the power required (Fig.2-8). Note: The ‘–’ key has a repeat function: holding the key pressed down will reduce the power setting by one level every 0.3 seconds. ...

6 Timer Function The timer has two settings: • Zone timer • Minute timer Zone timer This allows each cooking zone to be set to cook up to a maximum of 99 minutes at a set power level. At the end of the cooking time the zone will turn off automatically. Activating the timer: Select the required cookin...

7 Turning off the timer alarm: At the end of the cooking time the hob will beep steadily for 2 minutes. Press any key to stop the alarm. Deactivating the timer: Make sure that none of the cooking zones has been selected. Press the timer and ‘–‘ keys simultaneously. The timer display will go out. Chil...

8 Cleaning burned-on spills Make sure that the residual heat indicators are off and that the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of about 30° to the surface and then scrape off the burned-on matter (Fig.3-1). Once you have ...

10 INSTALLATION Check the appliance is electrically safe when you have finished. Dear Installer Before you start your installation, please complete the details BELOW. Should your customer have a problem relating to your installation they will be able to contact you easily. ArtNo.050-0011 - Installer ...

11 INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob The hob should be fitted into a work surface, which is at least 600mm deep. In position, it has a maximum thickness of 5mm from the top of the work surface. The cut-out dimensions are shown in (Fig.5-1...

12 INSTALLATION Check the appliance is electrically safe when you have finished. Electrical Connections This appliance must be installed by a qualified electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply company requireme...

14 7. Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Base of the hob COUNTRY OF DESTINATION: GB/IE Dimensions Height Above worktop: 5mm Below worktop: 40mm (60mm including connection box) Overall width 580mm; see ‘Positioning of the hob’ Overall depth 5...