Page 2 - Contents
2 ˆ Contents Features .................................................................................................................................. 6 Installation .............................................................................................................................. 8 Mou...
Page 3 - CAUTION
3 Adjusting the TAD’S Volume ........................................................................................... 19Deleting Messages ......................................................................................................... 19Setting the Remote Operation Pin .....................
Page 5 - FCC STATEMENT
5 BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OFFIRE OR INJURY, READ AND FOLLOWTHESE INSTRUCTIONS. 1. Use only the appropriate type and size battery pack specified in the instructionmanual provided for this product. 2. Do not dispose of the battery pack in a fire. The cell may explode. C...
Page 6 - LIGHTNING; Features
6 Features THE FCC WANTS YOU TO KNOW In the unlikely event that your phone causesproblems on the phone line, the phone com-pany can temporarily discontinue your ser-vice. If this happens, the phone companyattempts to notify you in advance. If advancenotice is not practical, the phone companynotifies...
Page 7 - TELEPHONE FEATURES
7 Features TELEPHONE FEATURES 10 Number Memory Dialing — lets youstore 10 numbers in memory for easy dialing. Page — lets you send a paging signal fromthe base to the handset to page someone orlocate the handset if you misplace it. 30 Channels — automatically selects a clearchannel when you make or ...
Page 8 - Installation; MOUNTING THE PHONE; On a Desk Top
8 Installation ˆ Installation MOUNTING THE PHONE You can place the TAD’s base on a desk ortable, or mount it on a standard wall plate ordirectly on a wall. Choose a location that is: • near an AC outlet • near a modular telephone line jack • out of the way of normal activities • away from electrical...
Page 9 - On a Wall Plate or Wall
9 Installation 7. Lift the base’s antenna to a vertical posi- tion. On a Wall Plate or Wall 1. Insert the bracket’s tabs into the base’s lower tab slots, then press down on thebracket’s clips and insert them into theclip slots. 2. Plug one end of the supplied short mod- ular cord into the TEL LINE j...
Page 12 - A QUICK LOOK AT THE HANDSET
12 Installation A QUICK LOOK AT THE HANDSET Note: The handset window has plastic film on it to protect it during shipment. Carefully peel offthe film before using your phone for the first time. SETTING THE DIALING MODE Set PULSE-TONE on the back of the base for the type of service you have. If you a...
Page 14 - Telephone Operation; SELECTING THE CHANNEL
14 Telephone Operation ˆ Telephone Operation MAKING AND RECEIVING CALLS WITH THE HANDSET To make a call, lift the handset and press TALK . The TALK/LOW BATT indicator on the handset and the CHARGE/IN USE indicatoron the base light. Dial the number. To answer a call, lift the handset from thebase or,...
Page 15 - USING FLASH; Storing a Number in Memory
15 Telephone Operation Note: If you hear a high-pitched noise fromthe base’s speaker, the handset and thebase are too close together. Move themaway from each other. USING FLASH FLASH performs the electronic equivalent of a switchhook operation for special services,such as Call Waiting. For example, ...
Page 16 - Entering a Pause; USING A HEADSET
16 Telephone Operation • If you receive a call while entering a number in memory, the TAD exits thestoring process. 1. Lift the handset. 2. Press MEMORY . The TALK/BATT LOW indicator flashes. 3. Enter the phone number and any tone or pause entries (see “Using Tone Serviceson a Pulse Line” on Page 15...
Page 17 - TAD Operation
17 TAD Operation Notes: • Connecting a headset disconnects the handset’s earpiece and microphone. • VOL 8 8 8 8 or 9 9 9 9 or MUTE on the handset also controls the connected headset’svolume. • If you place the handset on the base to recharge it while the headset is con-nected, be sure the handset se...
Page 18 - SCREENING CALLS; FL; RECORDING A MEMO
18 TAD Operation ANN (announcement only) — The TADplays the outgoing message but doesnot let callers leave a message. SETTING THE TAD TO ANSWER CALLS To set the TAD to answer calls, press AN- SWER on the base. If the TAD is set to record a caller’s message (see “Setting the RecordTime” on Page 17), ...
Page 19 - PLAYING MESSAGES
19 TAD Operation To start recording a phone conversation,hold down MEMO on the base until the TAD beeps and –– appears. To stop recording, press PLAY/STOP or MEMO . The TAD stores a recorded conversation asa message (see “Playing Messages”). Note: The TAD does not record conversa-tions less than two...
Page 20 - REMOTE OPERATION; rC
20 TAD Operation Note: If you press SPEAKER or PLAY/STOP while changing the PIN, the TAD exits. Beginagain with Step 1. REMOTE OPERATION While you are away from your home or of-fice, you can use a touch-tone phone, or apulse (rotary) phone with a pocket tone dialer(not supplied and available through...
Page 21 - Remote Commands
21 TAD Operation To enter a remote command, press # and (within 2 seconds) the number for the com-mand you want. Note: The remote operation stops whensomeone picks up the handset or any phoneon the same phone line. Remote Commands Press # then To 1 Repeat the current message during playback. 2 Play ...
Page 22 - Troubleshooting
22 Troubleshooting ˆ Troubleshooting We do not expect you to have any problems with your TAD, but if you do, these suggestionsmight help. Problem Suggestion Low volume or unusual sounds. Someone has picked up another phone on the same line. Hang up the other phone. Severe noise interference. Press C...
Page 23 - CARE
23 Troubleshooting If you still have problems, disconnect the TAD. If other phones on the same line work properly,the fault is in this phone or its installation. If you cannot find the problem, take your phone toyour local RadioShack store for assistance. CARE To enjoy your phone for a long time: • ...
Page 24 - Limited One-Year Warranty
43-1130 UCZZ01691BZ 05A00 Printed in China RadioShack CorporationFort Worth, Texas 76102 Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman-ship under normal use for one (1) year from the date of purchase from RadioShack company-ow...
