Page 2 - WARNING; : To reduce the risk of fire; CAUTION
© 1998 Tandy Corporation. All Rights Reserved. RadioShack is a registered trademark used by Tandy Corporation. This symbol is intended to alert you to the presence of un-insulated dangerous voltage within the product’s enclo-sure that might be of sufficient magnitude to constitute arisk of electric ...
Page 3 - FEATURES
3 FEATURES Your RadioShack System 933 79-Memory Caller ID with CallWaiting, Illuminator Backlight and Dial Back is the latest in tele-phone technology. The system displays the caller’s telephonenumber (and name, if available in your area) and the currentdate and time, as provided by your local phone...
Page 6 - Important Information:
6 Important Information: • To use this system, you must be in an area where Caller ID service is available, and you must subscribe to the ser-vice. • Where Caller ID is offered, one or more of the following options are generally available: – Caller’s number only – Caller’s name only – Caller’s name ...
Page 7 - FCC INFORMATION; ringer equivalence number; FCC Rules
7 FCC INFORMATION We have designed your system to conform to federal regula-tions, and you can connect it to most telephone lines. Howev-er, each system (and each device, such as a telephone oranswering machine) that you connect to the telephone linedraws power from the telephone line. We refer to t...
Page 9 - CONTENTS
9 CONTENTS Please add the contents 43-933.fm Page 9 Monday, August 16, 1999 2:59 PM
Page 10 - PREPARATION; INSTALLING BATTERIES
10 PREPARATION INSTALLING BATTERIES You need four AAA batteries (not supplied) to protect the sys-tem’s memory during a power failure. For the longest operationand best performance, we recommend alkaline batteries, suchas RadioShack Cat. No. 23-558. Cautions: • Always use fresh batteries of the requ...
Page 11 - replacing
11 • When replacing the batteries, have fresh ones on hand before you begin. If you do not install the new batterieswithin about 2 minutes after removing the old ones, youwill lose all the information stored in the system. 1. Make sure the system is unplugged from the telephone line and AC power. 2....
Page 12 - BATT; CONNECTING THE AC ADAPTER
12 When BATT appears or the display dims, replace the batteries. Cautions: • Always remove old or weak batteries. Batteries can leak chemicals that can damage your system. • Dispose of dead batteries promptly and properly. Do not bury or burn them. CONNECTING THE AC ADAPTER To power the system, plug...
Page 13 - CONNECTING THE SYSTEM; Connecting to a Single-Line Phone
13 CONNECTING THE SYSTEM The System 933 connects to any modular phone jack and yourphone. You can also connect it to an answering machine. Connecting to a Single-Line Phone 1. Disconnect the telephone line cord from the phone and plug it into the system’s LINE jack. 2. Plug one end of the supplied l...
Page 14 - Connecting to a Two-Line Phone
14 Connecting to a Two-Line Phone To record information about calls received on a two-line phone,you can connect two System 933s using a triplex adapter suchas Cat. No. 279-402 (not supplied). Each system only recordsinformation about calls received on the line to which it is con-nected. Follow thes...
Page 15 - Connecting to an Answering Machine; MOUNTING THE SYSTEM
15 Connecting to an Answering Machine 1. Plug a telephone line cord into the modular jack and plug it into the system’s TO LINE jack. 2. Plug one end of the supplied line cord into the system’s TO PHONE jack and plug the cord’s other end into the answer- ing machine’s jack. 3. Plug a third telephone...
Page 18 - ADJUSTING THE DISPLAY CONTRAST; CONTRAST ADJUST; CHOOSING A LANGUAGE; ENGLISH
18 ADJUSTING THE DISPLAY CONTRAST To lighten or darken the display, hold down ERASE and RE- VIEW buttoms until CONTRAST ADJUST appears in the dis- play. To scroll through the contrast setting, press the REVIEW button. CHOOSING A LANGUAGE Your System 933 is programmed to display messages in En-glish,...
Page 19 - SETTING LOCAL AREA CODE; LOCAL AREA
19 SETTING LOCAL AREA CODE Before receiving calls, you should enter your local area code. 1. Hold down both REVIEW buttons until LOCAL AREA CODE appears. 2. To change the first digit, press REVIEW button until the desired digit appears. Then, press ERASE button to con- firm. 3. Repeat step 2 for set...
Page 20 - OPERATION; RECEIVING AND STORING CALLS; NEW; TOTAL; RECEIVING CALL WAITING CALLS
20 OPERATION RECEIVING AND STORING CALLS Caller ID is a service provided by your telephone company.When you subscribe to this service, the telephone companysends the caller’s telephone number (and name, if available)and the call’s date and time between the first and second ring.The system receives a...
Page 21 - REVIEWING CALL RECORDS; OF
21 REVIEWING CALL RECORDS Each time you receive a call, the system saves a call record inmemory that you can see while you are on the phone or reviewlater. Each call record includes the time and date of the call, the callnumber (order the call is received), the caller’s telephone num-ber, and the ca...
Page 23 - Displayed Call Information; Display
23 Displayed Call Information The system can display the following information. Display (English, French, Spanish) Description REPT Appears with a number if youhave received a call from thesame phone number more thanonce. LONG DISTANCELONGUE DISTANCELARGA DISTANCIA Appears along with LDC (long dis- ...
Page 25 - VIP
25 TOTALTOT.TOTAL The total number of incomingcalls(not included VIP calls). #NEW Indicates it is a new call that hasnot been reviewed. -RECORD STORED- -MEMORISE--MEMORIZADO- The caller ID record is stored inVIP memory. VIP VIP memory is active. -VIP MEMO FULL--VIP PLEIN--VIP LLENO- Appears when no ...
Page 26 - DELETING CALLS; Deleting a Single Call; Deleting All Calls; DELETE
26 DELETING CALLS Deleting a Single Call 1. Repeatedly press (or hold down) either REVIEW key until you see the call record you want to delete. 2. Press DELETE . The system deletes that record and auto- matically renumbers the remaining call records. After 10seconds, the time and date reappears. Del...
Page 27 - VIP CALL LIST
27 VIP CALL LIST Your system lets you save up to 20 call records in its VIP calllist so they will not be deleted if you delete all calls from the sys-tem’s memory. This lets you save a list of important callers. Follow these steps to store call records in the VIP call list. 1. Repeatedly press eithe...
Page 28 - MESSAGE WAITING
28 To delete a VIP call record, select the call record you want todelete, then press DELETE . To delete all entries from the VIP call list, hold down DELETE until DELETE ALL? appears. Press DELETE to confirm. Or, to cancel deletion, do not press any button. After about 10seconds, DELETE ALL? disappe...
Page 29 - TROUBLESHOOTING; Problem
29 TROUBLESHOOTING If your system is not working as it should, these suggestionsmight help you eliminate the problem. Problem Solution Blank screen The System 933 is not receivingpower. Make sure the batteriesare installed and the AC adapteris plugged in. Adjust the contrast as describedin “Adjustin...
Page 31 - CARE AND MAINTENANCE
31 CARE AND MAINTENANCE Your RadioShack System 933 79-Memory Caller ID with CallWaiting, Illuminator Backlight and Dial Back is an example ofsuperior design and craftsmanship. The following suggestionswill help you care for your system so you can enjoy it for years. Keep the system dry. If it gets w...
Page 32 - LIGHTNING
32 Modifying or tampering with the system’s internal componentscan cause a malfunction and might invalidate your system’swarranty and void your FCC authorization to operate it. If yoursystem is not performing as it should, take it to your local Ra-dioShack store for assistance. If the trouble is aff...
Page 33 - NOTES
33 NOTES 43-933.fm Page 33 Monday, August 16, 1999 2:59 PM
