RadioShack PRO-CSW800 - Manual
RadioShack PRO-CSW800 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Cat. No.
40-1017
PRO-CSW800 8" Car Subwoofer
Your RadioShack PRO-CSW800 8" Car Subwoofer lets
you increase the bass response of your vehicle’s sound
system. When mounted inside an enclosure, your sub-
woofer’s high-output, low-distortion design provides qual-
ity bass sound reproduction. The subwoofer’s long-travel
voice coil lets it handle high input power with ease.
Note: To connect the subwoofer to your stereo amplifier’s
wires, you need 2 banana plugs such as Cat. No. 278-
306 (not supplied).
CHOOSING AN ENCLOSURE
To get the best performance from your subwoofer, you
must mount it inside an enclosure. An enclosure makes
your subwoofer more efficient and improves its sound
quality.
Some common enclosure designs are:
• Acoustic suspension (sealed)
• Ported reflex (vented)
• Single reflex bandpass (vented)
For more information about a single reflex bandpass en-
closure, see “Single Reflex Bandpass (vented)” on
Page 2.
To learn more about and build an acoustic suspension or
ported reflex enclosure, we recommend you use the book
Building Speaker Systems
(Cat. No. 62-1087A, available
at your local RadioShack store) along with this Owner’s
Manual. That book has complete information about build-
ing enclosures, including obtaining construction materi-
als, and design and construction tips.
Note: Check with RadioShack Unlimited for a pre-built
enclosure for this subwoofer.
ENCLOSURE SIZES
After you choose an enclosure type for your subwoofer,
for the best results, build the enclosure to the dimensions
recommended in this section.
Acoustic Suspension (sealed)
Ported Reflex (vented)
11
×
11
×
9
1
/
2
Inches (HWD)
.50 Cubic Feet (.47 net)
A
A
B
B
C
C
A (2)
—
11
"
×
11
"
(one with 7
1
/
16
"
diameter cutout)
B (2)
—
11
"
×
9
1
/
2
"
HW
C (2)
—
9
1
/
2
"
×
9
1
/
2
"
HW
F3: 63 Hz
Ripple: 0 dB
Excursion Limited Power Handling: 79 Watts
C
C
A
A
B
B
11
×
11
×
14
1
/
4
Inches (HWD)
.75 Cubic Feet (.70 net)
A (2)
—
11
"
×
11
"
(one with 7
1
/
16
"
diameter cutout)
B (2)
—
11
"
×
14
1
/
4
"
HW (one with 2
"
diameter cutout)
C (2)
—
9
1
/
2
"
×
14
1
/
4
"
HW
F3: 46Hz
Ripple: 1.3 dB
Excursion Limited Power Handling: 96 Watts
Tuning Frequency: 37 Hz
© 1998 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
