RadioShack Cordless Room Monitor - Manual

5 ˆ Contents Preparation ............................................................................ 6 Selecting a Location ........................................................ 6Powering the Transmitter ................................................. 6 Using AC Power ............................

6 Preparation ˆ Preparation SELECTING A LOCATION You can place the transmitter on a desktop or table, or mount iton a wall. And, you can carry the receiver with you. Select a lo-cation for the transmitter that is: • Near an AC outlet • Out of the reach of children • Out of the way of normal activiti...

7 Preparation Caution: The supplied RadioShack adapter was designedspecifically for your room monitor. Use only the suppliedadapter. 2. Plug the adapter’s AC plug into a standard AC outlet. Unplug the adapter when you are not going to use the transmit-ter for a long time. Caution: To prevent a possi...

10 Preparation 9. Place the receiver into the charging slot on the charger. The POWER/CHARGE indicator on the charger lights. After the battery is charged, you can use the receiver while it isstill in the charger. If you carry the receiver around with you,place it back in the charger when you are th...

11 Preparation RadioShack’s involvement in this program is part of the compa-ny’s commitment to preserving our environment and conservingour natural resources. MOUNTING THE TRANSMITTER ON A WALL With the supplied hook, you can mountthe transmitter on a wall. Use two 1 / 8 -inch flat-head screws (not...

12 Operation USING THE RECEIVER’S BELT CLIP The belt clip on the receiver lets youkeep your hands free while monitoring.To detach the belt clip, unlatch the clipby lifting the tab slightly with your fingeror a screwdriver, then slide the belt clipin the direction of the arrow. ˆ Operation 1. Slide P...

13 Operation As the receiver moves away from the transmitter, the hiss-ing background noise increases. Move closer to the trans-mitter to eliminate the noise. Note: Range varies depending on obstructions, such asthe number of walls between the transmitter and receiver,locations of furniture and appl...

14 Troubleshooting ˆ Troubleshooting If a problem occurs, check that: • Both the transmitter and the receiver are on. • Both adapters are plugged in firmly, or the transmitter’s adapter is plugged in firmly (or the transmitter has freshbatteries). • The receiver has a charged battery. • Volume on th...

15 Specifications ˆ Specifications Operating Frequencies: Channel 1 .............................................................................49.860 MHz Channel 2 .............................................................................49.890 MHz Power: Transmitter ..............................