Page 2 - Contents
2 ˆ Contents Features ................................................................................. 4 FCC Information .............................................................. 6 Preparation ............................................................................ 8 Installing Batteries ....
Page 3 - CAUTION
3 WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rainor moisture. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVECOVER OR BACK. NO USER-SERVICE-ABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED PERSONNEL. This...
Page 4 - Features
4 Features ˆ Features Your RadioShack 79-Memory Caller ID Module with Backlight isthe latest in telephone technology. The module displays thecaller’s telephone number (and name, if available in your area)and the current date and time, as provided by your local phonecompany to Caller ID service subsc...
Page 6 - FCC INFORMATION; Note: You must not connect your module to:
6 Features The actual number of Caller ID records your module will storedepends on the amount of Caller ID information sent by thephone company. FCC INFORMATION This module has been tested and found to comply with all appli-cable FCC standards. We have designed your module to conform to federal regu...
Page 8 - Preparation; INSTALLING BATTERIES
8 Preparation ˆ Preparation Your module’s display is protected by a piece of plastic film dur-ing shipment. Peel off this film before you use the module. INSTALLING BATTERIES Your module requires four AAA batteries (not supplied) to pro-tect its memory during a power failure. For the best perfor-man...
Page 9 - BATT
9 Preparation 2. Use a Phillips screwdriver to remove the screw from the battery compartment cover. 3. Slide the battery compartment cover in the direction of the arrow until it stops, then lift up the cover. Caution: The battery compartment cover is attached to themodule. Do not try to remove it co...
Page 10 - CONNECTING THE AC ADAPTER
10 Preparation Caution: If you do not plan to use the module for a month ormore, remove the batteries. Batteries can leak chemicals thatcan destroy electronic parts. CONNECTING THE AC ADAPTER The module uses the supplied 9V, 200-mA AC adapter for pow-er. Cautions: You must use a Class 2 power source...
Page 11 - CONNECTING THE MODULE; Connecting to a Single-Line Phone; Connecting to a Two-Line Phone
11 Preparation CONNECTING THE MODULE Your module connects to any modular phone jack and yourphone. You can also connect it to an answering machine. Note: The module might not work with older phones, such asWestern Electric phones. Connecting to a Single-Line Phone 1. Disconnect the telephone line co...
Page 13 - Connecting to an Answering Machine; MOUNTING THE MODULE
13 Preparation Connecting to an Answering Machine 1. Disconnect the phone line cord that connects your answer- ing machine to the phone line from the answeringmachine’s jack. Then plug it into the module’s TO LINE jack. 2. Plug one end of the supplied line cord into the module’s TO PHONE jack. 3. Pl...
Page 14 - Attaching the Mounting Bracket
14 Preparation Attaching the Mounting Bracket 1. Align the slots on the bottom of the module with the hooks on the mounting bracket. 2. Gently push the module down on the bracket to secure it. If you are placing the module on a desk, shelf, or table, pull outthe stand on the back of the bracket unti...
Page 15 - ADJUSTING THE DISPLAY CONTRAST; CONTRAST
15 Preparation 4. Attach the mounting bracket to the module (see “Attaching the Mounting Bracket” on Page 14). 5. Route the phone line cords and AC adapter cord through the slots on the back of the bracket. 6. Align the keyhole slots on the bracket with the screws in the wall, then slide the module ...
Page 16 - CHOOSING A LANGUAGE
16 Preparation CHOOSING A LANGUAGE Your module is programmed to display messages in English,but you can change it to display in French or Spanish. 1. Hold down REVIEW and CALL BACK for about 3 sec- onds until the current language ( ENGLISH , ESPANOL for Spanish, or FRANCAIS for French) appears. 2. R...
Page 17 - Operation; RECEIVING AND STORING CALLS; NEW; REVIEWING CALL RECORDS; CALL
17 Operation ˆ Operation RECEIVING AND STORING CALLS Caller ID is a service provided by your telephone company.When you subscribe to this service, the telephone companysends the caller’s telephone number (and name, if available)and the call’s date and time between the first and second rings.The modu...
Page 18 - END; Displayed Call Information; Description; LDC
18 Operation • If you do not press a button within about 10 seconds, the module automatically returns to the time and date display. • After you review all calls, END OF LIST appears. Simply press REVIEW or REVIEW to view again. Displayed Call Information The module can display the following informat...
Page 21 - REDIALING FROM CALL RECORD MEMORY; Deleting a Single Call
21 Operation REDIALING FROM CALL RECORD MEMORY You can redial a telephone number stored in the Caller ID’smemory. 1. Press REVIEW or REVIEW to view the desired call record. 2. Lift your phone’s handset and check for a dial tone. 3. Press CALL BACK to redial the telephone number. If the number to be ...
Page 22 - Deleting All Calls; VIP CALL LIST
22 Operation Deleting All Calls 1. While the module displays the time and date, press REVIEW or REVIEW . 2. Hold down ERASE until DELETE ALL? appears. While DELETE ALL? appears, press ERASE again. NO CALL appears. Or, to cancel the deletion, do not press any button. After about 5 seconds, DELETE ALL...
Page 23 - VIP
23 Operation Notes: • If the system’s memory is full (20 VIP call records are already stored), VIP MEMO FULL appears when you press VIP MEM . To store another VIP call record, you must first delete an existing one. • If you save a call record as a VIP call record, the total number of call records de...
Page 24 - Troubleshooting; Problem
24 Troubleshooting ˆ Troubleshooting If your system is not working as it should, these suggestionsmight help you eliminate the problem. If you see a message that you do not understand, see “Dis-played Call Information” on Page 18. Problem Solution Blank screen The module is not receiving power. Make...
Page 25 - Care and Maintenance
25 Care and Maintenance ˆ Care and Maintenance Your RadioShack 79-Memory Caller ID Module with Backlightis an example of superior design and craftsmanship. The fol-lowing suggestions will help you care for your module so youcan enjoy it for years. Keep the module dry. If it gets wet, wipe it dry im-...
Page 26 - THE FCC WANTS YOU TO KNOW
26 Care and Maintenance THE FCC WANTS YOU TO KNOW In the unlikely event that your module causes problems on thephone line, the phone company can temporarily discontinueyour service. If this happens, the phone company attempts tonotify you in advance. If advance notice is not practical, thephone comp...
Page 27 - Notes
27 Notes ˆ Notes 43-947.fm Page 27 Thursday, May 25, 2000 11:36 AM
