RadioShack 63-984 - Manual
RadioShack 63-984 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PREPARATION; Setting the Channel and Code
- Page 3 – Testing the Chime; Mounting the Transmitter
- Page 4 – Mounting the Receiver
- Page 5 – OPERATION; CARE
- Page 6 – SPECIFICATIONS
©
1999 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
Cat. No.
63-984
Wireless Intercom Door Chime
Your RadioShack Wireless Intercom
Door Chime operates as a two-tone
doorbell and an intercom. The chime
is simple to install because it requires
no wiring. Your chime's two channel
switch and digital coding prevent other
transmitters or radio devices from
sounding the chime. To conserve
power, both the receiver and transmit-
ter automatically turn off 30 seconds
after you stop using them.
The chime includes these features:
Separate Buttons for Bell and Inter-
com — let your callers first announce
their arrival and then communicate us-
ing the intercom.
Receiver Volume Control — lets you
adjust the volume to a comfortable lev-
el.
2-Channel Transmitter and Receiv-
er with Digital Code Selection — as-
sure interference-free communication.
50-Foot Usable Operation Distance
— means you can install the transmit-
ter and receiver virtually anywhere in
your home or business.
Indicators — light so you can easily
confirm the chime’s operation.
WARNING:
To reduce the risk of fire or
shock hazard, do not expose this product to rain
or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product’s enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accom-
panying this product.
!
!
63-984.fm Page 1 Wednesday, September 8, 1999 4:42 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 PREPARATION Setting the Channel and Code The transmitter and receiver areequipped with two selectable operationchannels and two selectable digitalcodes, to ensure positive operation andprevent interference from similar prod-ucts nearby. Select the same channeland code number for both the transmit-...
3 2. Place the batteries into the battery compartment as indicated by thepolarity symbols (+ and –) markedinside. 3. Be sure the rubber seal around the battery compartment is properlypositioned, then replace the coverand tighten the screw. Replace all four batteries if the transmit-ter’s indicator l...
4 low). Then insert an anchor intoeach hole. 2. Align the metal mounting bracket with the holes you just drilled anddrive a screw through the bracketinto each hole. Do not overtightenthe screws. 3. Align the slot on the back of the transmitter with the hook on themounting bracket. Carefully pushthe ...
