RadioShack 63-235 - Manual

6 3 - 2 3 5

U s e r ’s G u i d e

DIGITAL TIRE GAUGE

b a c k l i t d i s p l a y

Please read this user’s guide before using your new tire

gauge.

Package contents

Tire Gauge

User’s Guide

Quick Start

Features

Swivel work/emergency lights
Selectable units
Backlit display
Tire tread gauge

1

Install Batteries

1.

Unscrew to remove the battery

compartment cover.

2.

Install two AAA batteries (not

included), matching the polarity

symbols (+ and –) marked inside.

3.

Replace the cover and secure it

with the screw.

b

Battery Notes:

Dispose of batteries promptly and

properly. Do not burn or bury them.
Use only fresh batteries of the

required size and type.
Do not mix old and new batteries, different types of batteries

(alkaline, or rechargeable), or rechargeable batteries of different

capacities.
If you do not plan to use the tire gauge for an extended time,

remove the battery. Batteries can leak chemicals that can

damage electronic parts.

















Changes or modifications not expressly approved by Ignition L.P. may cause interference and void the

user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Limited Warranty

Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the

original purchaser for

ninety (90) days

after the date of purchase. IGNITION L.P. MAKES NO OTHER

EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to

follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods

or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who

are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary

wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product

removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the

original purchaser.
Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof

of purchase date to the place of purchase. Ignition L.P. will, at its option, unless otherwise provided by

law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a

comparable product; or (c) refund the purchase price. All replaced parts and products, and products on

which a refund is made, become the property of Ignition L.P. New or reconditioned parts and products

may be used in the performance of warranty service. Repaired or replaced parts and products are

warranted for the remainder of the original warranty period. You will be charged for repair or replacement

of the product made after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS

LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING

THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY

OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED

WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO

THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY

LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE

OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT

NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF

TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.
Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation

of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from State to

State. You may contact Ignition L.P. at:
Ignition L.P., 3102 Maple Ave Suite 450, Dallas, TX 75201

02/09

For product support, call

1-866-315-0426

2

Measure Tire Pressure

1.

Unscrew the valve cap from the tire.

2.

Press

CHECK

.

0.0

PSI

shows.

3.

Repeatedly press

CHECK

to change the measurement

unit to be

BAR

,

KG/cm

2

, or

KPa

.

4.

Connect the tire gauge to the tire valve and hold in place

for a few seconds to read the measurement.

The display turns off after 20 seconds if no further operation

is made.

3

Measure Tire Tread

1.

Slide the switch at the back of the tire gauge to extend

the tire tread measurement guide and insert it between tire

treads.

Depth

Indicator

Status

> 6mm

Green

Safe.

2-6mm

Amber

Alert. Check tires.

< 2mm

Red

Dangerous. Replace tires.

2.

After measurement, slide the guide in.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.






Printed
in China

07A09

63-235

CHECK

Press to turn on your

tire gauge. Press once

more to change units.

© 2009. Ignition L.P. All rights reserved.

Swivel work lights/

emergency lights

270 degree swivel LED

lights.

Air pressure

release pin

Connect to the tire valve if

the pressure is too high.

Air pressure

measurement head

Connect to the tire valve

and hold in place for a few

seconds to measure the

tire pressure.

LIGHT

Press once: the lights are on.
Press twice: the lights flash.
Press the third time: lights off.

Protect the environment by recycling used electronics. Go

to E-CyclingCentral.com to find an electronic recycling

center near you.

Tire tread measurement guide

To measure tire tread.

Tire tread

indicator

Slide to extend

the tire tread

measurement

guide

Built-in Magnet

Place the tire gauge on

any metallic surface.

AA

A

AA

A