RadioShack 63-1037 - Manual

©

2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by

RadioShack Corporation.

OWNER’S MANUAL —
Please read before using this equipment.

www.radioshack.com

™

63-1037

Thank you for purchasing the RadioShack
Wireless Pool/Spa Thermometer. Your
thermometer measures water temperature,
and is useful in swimming pools, hot tubs,
and freezers. It is for use with an in/out
thermometer (not supplied, available at your
local RadioShack store or online at
www.radioshack.com). The supplied wall
mount holder and stand let you mount it
wherever you like.

+056#..+0)

"

$#66'4+'5

Your thermometer requires two AA batteries
(not supplied) for power. For the best
performance and longest life, we
recommend RadioShack alkaline
batteries.

RRRRý

.

.

.

.

1. Remove the wall-mount holder from the

back of the thermometer.

2. Use a Phillips screwdriver to loosen the

screws on the battery compartment
cover and remove the cover.

3. Slide

CHANNEL 1/2/3

to the desired

setting, then press

RESET

. The selected

channel appears on the display.

4. Slide

°°°°

C/

°°°°

F

to the desired setting.

5. Place two batteries in the compartment

as indicated by the polarity symbols
(+ and –) marked inside.

6. Replace the cover and secure it with the

screws.

RRRRý

12'4#6+10

Place the temperature sensor probe where
you want to test. The current temperature
and selected channel appear. Signals
transmit to the main unit about every 30
seconds.

±

±

±

±

4

'5'66+0)

"

6*'

"

5

;56'/

If your thermometer stops working properly,
use a pointed object to press

RESET

. This

resets the temperature and reinitializes the
sensor transmitter.

/1706+0)

Place your thermometer on a flat surface
using the supplied stand, or mount it on the
wall using screws (not supplied) and the
supplied holder.

5

'.'%6+0)

"

#

"

.

1%#6+10

Choose an indoor or outdoor location for
your thermometer that is within 60 – 90 feet
(20 – 30 meters) of the main unit.

±

±

±

±

P O O L

S P

A

W I R E

L E S S

T H E

R M O M

E T E R

Liquid Crystal Display — The
current temperature and selected
channel appear.

Temperature Sensor Probe — Place it in
water to test the temperature.

°C / °F — Select Centigrade (°C) or
Fahrenheit (°F) for your desired degree
format.

Wall Mount Holder — Use to mount
the thermometer on a wall.

Removeable Stand — Use to set
thermometer on a table or other flat surface.

Channel 1/2/3 — Slide to Channel 1, 2, or 3. Set
to a different channel than the other remote
sensors you are using.

y

y

y

y

— Appears if the batteries are weak.

.

"

%#76+10

"

.

• Use only fresh batteries of the required size

and recommended type.

• Do not mix old and new batteries, different

types of batteries (standard, alkaline, or
rechargeable), or rechargeable batteries of
different capacities.

• If you do not plan to use the thermometer for

a month or more, remove the batteries.
Batteries can leak chemicals that can
destroy electronic parts.

°

C/

°

F

CHANNEL 1/2/3

RESET

Battery
Compartment
Cover

R

"

9#40+0)

"

R

Dispose of old batteries promptly and properly.
Do not burn or bury them.

±

"

016'

"

±

"

Operation

• Do not set two or more thermometers to the

same channel when using them with one
main unit. Otherwise you will unable to judge
which thermometer the digits represent.

• Your thermometer comes with a protective

film covering the display which should be
removed before use.

Selecting a Location

The construction of your home or office might
affect the transmission range between the
main unit and the thermometer. If you have a
choice of several locations, try each to see
which provides the best performance.

9KTGNGUU

"

2QQN

1

5RC

"

6JGTOQOGVGT

#

"

+/2146#06

"

#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon
for pertinent information.

RRRRý

— Warning

#

— Important

±

±

±

±

— Note

.

.

.

.

— Caution

°

°

°

°

— Hint