RadioShack 49-1003 - Manual

Please read this user’s guide before

installing, setting up and using your new product

www.radioshack.com

Thank you for purchasing your Wireless
Motion Detector from RadioShack.

motion detector

mounting bracket

mounting screws (2)

machine screw (1)

what’s included

1. Remove

the battery
compartment
cover.

2. Insert 2 AA

alkaline
batteries.

3. Replace the cover.
4. After replacing the batteries, press

arm

to arm your system. Walk past the

motion detector. If the system does not
trip, register the motion detector again.
Follow steps 1 thru 6 of “registering
your motion detector”.

If the motion detector stops working properly, or

PROBLEM

appears on your console display, replace

the motion detector’s batteries.

• Dispose of old batteries promptly and properly.
• Do not burn or bury batteries.
• Use only fresh batteries of the required size and

recommended type.

• Do not mix old and new batteries, different types

of batteries, or batteries of different capacities.

installing batteries

49-1003

Wireless Motion Detector

1. Hold down

TEST

on your motion detector for

3-4 seconds and then release it.

Note: If you need to register the motion
detector a second time, remove the batteries,
and then hold down

TEST

for 3-4 seconds to

pick up a random code.

2. Press

menu start

or on your security

system console.

ENTER PIN

(Personal

Identification Number) appears on the
display.

3. Use the console keypad to enter your four-

digit PIN. * appears on the display as each
digit is pressed. After you enter your PIN

, 1.

INSTALL

appears.

4. Press

ok

and

1. INSTALL / ZONE

appears.

5. Press

TEST

on your motion detector. The

console chimes and

ZONE 1 SET

appears on

the console display to confirm registration.

6. Press

clear

to navigate backward through

the console menu options. Press

1

to return

to the main display, or press

2

to stay in

install mode and register additional motion
detectors.

Refer to your Wireless Security Kit User Guide (49-
1000) for instructions on how to change your PIN.

registering your motion detector

This wireless motion detector is for use with

your Wireless Security Kit (49-1000). Your

Wireless Security Kit includes one motion

detector. Purchase up to 29 additional (30

total) motion detectors to expand and protect

all 30 system zones. You can add additional

door/window sensors and additional motion

detectors, as long as the additional units do not

exceed 30 (number of zones in your system).

Refer to your 49-1000 user guide for more

information on adding motion detectors and

door/window sensors to your wireless system.

The motion detector senses movement up to

40 feet away, and should be mounted within

100 feet of the console to work properly.

mounting bracket

mounting screws (2)

motion detector

machine screw (1)









