RadioShack 43160 - Manual - manualsarea.com

Page 2 - FEATURES

2 FEATURES Your Radio Shack Wireless Phone Jack System lets you add atelephone jack anywhere you have an AC outlet, without drillingholes, soldering, squeezing into cramped attic spaces, or fishinga single wire through the wall. The system also has these features: Security Coding — prevents someone ...

Page 3 - OPERATING PRECAUTIONS

3 This symbol is intended to alert you to the presence of unin-sulated dangerous voltage within the product’s enclosure thatmight be of sufficient magnitude to constitute a risk of electricshock. Do not open the product’s case. This symbol is intended to inform you that important operatingand mainte...

Page 5 - FCC INFORMATION

5 FCC INFORMATION We have designed your Wireless Phone Jack System to conformto federal regulations, and you can connect it to most telephonelines. However, each device that you connect to the phone linedraws power from it. We refer to this power draw as the device’sRinger Equivalence Number, or REN...

Page 6 - FCC PART 68 AND CLASS B NOTICES; FCC

6 FCC PART 68 AND CLASS B NOTICES This Wireless Phone Jack System complies with Part 68 of FCC Rules . You must, upon request, provide the FCC Registration Number and the REN to your phone company. These numbersare located on the base unit’s label. Note: You must not connect your Wireless Phone Jack...

Page 7 - LIGHTNING

7 LIGHTNING Your Wireless Phone Jack System has built-in protection circuitsto reduce the risk of damage from surges in telephone line andpower line current. These protection circuits meet or exceed theFCC requirements. However, lightning striking the telephone orpower lines can damage your telephon...

Page 8 - USING THE SYSTEM; INSTALLATION

8 USING THE SYSTEM It is very important that you follow all instructions in the order giv-en. If you have a problem, unplug both units from the AC outlets,unplug the phone(s) from the units, and start over (or see “Trou-bleshooting” on Page 13). INSTALLATION 1. Plug the base unit into a standard AC ...

Page 10 - SETTING THE SECURITY CODE

10 SETTING THE SECURITY CODE This system has preset security codes which prevent interferenceand background noise caused by similar systems. If youencounter interference, follow these steps to set your securitycodes. Note: You should only need to set the security code if you get in-terference from a...

Page 11 - ADDING MORE EXTENSION UNITS

11 3. Wait for the base unit’s indicator to turn off. Then lift the extension telephone’s handset and confirm that you hear adial tone and that there is no interference or backgroundnoise. If there is a problem, repeat these steps. If you cannot get a dial tone, unplug the cords from both phonejacks...

Page 12 - RESETTING THE SYSTEM

12 RESETTING THE SYSTEM If your Wireless Phone Jack System is not operating, you mightneed to reset it. Follow these steps to reset the system. 1. Unplug both the base and extension unit(s) from the AC out- lets and disconnect all phones from the units. 2. Press the coding button on the base for 5 s...

Page 13 - TROUBLESHOOTING

13 TROUBLESHOOTING We do not expect you to have any problems with your system,but if you do, the following suggestions might help. If you stillhave problems, disconnect the base and all extensions and takethem to your local Radio Shack store for assistance. Problem Suggestion Static interference. Mo...

Page 14 - CARE AND MAINTENANCE

14 CARE AND MAINTENANCE Your Radio Shack Wireless Phone Jack System is an example ofsuperior design and craftsmanship. The following suggestionswill help you care for your system so you can enjoy it for years. • Keep the system dry. If it gets wet, wipe it dry immediately. Liquids can contain minera...

Page 15 - NOTES

15 NOTES 43-160.fm Page 15 Thursday, August 12, 1999 2:25 PM