RadioShack 43-327 - Manual

Te le ph on e Se tu p Battery Installation and Charging Install the battery as shown below. For best performance, charge the handset for at least 16 hours before use. When not in use, place the handset in the telephone base or charger. See page 41 for battery operating times. 1. If the battery compa...

Te le ph on e O pe ra ti on Installation Options Your telephone base is now ready for table top use. If you want to mount your telephone on a wall, use the provided wall bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purcha...

Te le ph on e O pe ra tio n Message window Shows the number of messages and other answering system information. VOL • Press to adjust the volume during playback. • When the phone is not in use, press to adjust the telephone base ringer volume. IN USE light • Flashes when there is an incoming call, o...

10 Te le ph on e Se tu p Handset Layout CHARGE light On when the handset is charging in the telephone base or charger. / FLASH • Press to make or answer a call.• During a call, press to receive an incoming call when you receive a call waiting alert. 1 While reviewing a call log entry, press repeated...

12 Te le ph on e Se tu p Handset Ringer Volume You can set the ringer volume or turn the ringer off. 1. Press MENU/SELECT to show the menu. 2. Press  or  to select > RINGER VOLUME , then press MENU/SELECT. 3. Press  or  to adjust the volume. A sample of each ringer volume plays as you scroll ...

13 Te le ph on e S et up LCD Language You can select ENGLISH, FRANÇAIS or ESPAÑOL to be used in all screen displays. 1. Press MENU/SELECT to show the menu. 2 Press  or  to select > LCD LANGUAGE , then press MENU/SELECT. 3. Press  or  to scroll through the choices. 4. Press MENU/SELECT to conf...

14 Te le ph on e Se tu p Use the clear voicemail feature when the telephone indicates that there is new voicemail but there is none (for example, when you have accessed your voicemail while away from home). Clearing the voicemail waiting indicator only turns off the indicators; it does not delete yo...

1 An sw er in g Sy st em S et up Answering System Setup Use a handset to change your answering system settings. Number of Rings You can choose from two, four, or six rings; or toll saver. With toll saver selected, the answering system answers after two rings when you have new messages, and after fou...

1 An sw er in g Sy st em S et up 4. Press  or  to select > MSG ALERT TONE , then press MENU/SELECT . . Press  or  to select ON or OFF , then press MENU/SELECT to confirm your selection. n Note: The answering system must be turned on for the message alert tone to function. Announcement The tel...

17 An sw er in g Sy st em S et up Delete Your Announcement 1. Press MENU/SELECT to show the menu. 2. Press MENU/SELECT to select > ANS. SYSTEM . 3. Press  or  to select > ANS SYS SETUP , then press MENU/SELECT . 4. Press  or  to select > ANNOUNCEMENT , then press MENU/SELECT . The hands...

1 Te le ph on e O pe ra ti on Telephone Operation Make a Call Press /FLASH or . You will hear a dial tone. Dial the number. Predial a Call Dial the number.Press /FLASH or . Answer a Call Press /FLASH , , or any of the dialing keys ( 0-9, #, * ). n Notes: • The screen shows the elapsed time as you ta...

1 Te le ph on e O pe ra tio n Mute The mute function allows you to hear the other party but the other party cannot hear you. 1. During a call, press MUTE/REMOVE on the handset. The handset screen shows MUTED for a few seconds. MUTE appears at the bottom of the screen until the mute function is turne...

20 Te le ph on e O pe ra ti on To access a number in the directory while on a call: 1. Press MENU/SELECT twice to select > DIRECTORY . 2. Scroll to the desired entry by pressing  or  . 3. Press MENU/SELECT to dial the displayed number. To access a number in the call log while on a call: 1. Pres...

21 Te le ph on e O pe ra tio n • If you have more than two handsets, your screen shows INTERCOM TO: . Use the dialing keys to select the other handset. Your screen shows CALLING HANDSET X . The other handset rings and its screen shows either OTHER HANDSET IS CALLING or HANDSET X IS CALLING . 2. To a...

23 D ire ct or y Directory The directory can store up to 50 entries with up to 30 digits for each phone number and 15 characters for each name. • When there are no records in the directory, the screen shows DIRECTORY EMPTY . • When the directory is full and you try to save an entry, the screen shows...

24 D ir ec to ry • Copy a number from the redial list by pressing REDIAL/PAUSE and then  ,  , or REDIAL/PAUSE to select a number. Press MENU/SELECT to copy the number. . Press MENU/SELECT to move to the name. The screen shows ENTER NAME. . Use the dialing keys (see “Character Chart” below) to ente...

2 D ire ct or y Search the Directory Entries are sorted alphabetically. To search the directory: 1. Press when the handset is not in use. -OR- Press MENU/SELECT when the handset is not in use. Press  or  to select > DIRECTORY and then press MENU/SELECT twice. 2. Press  or  to browse. Alphabet...

2 D ir ec to ry Edit a Directory Entry Use the following steps to edit an entry in the directory. 1. Press when the handset is not in use. -OR- Press MENU/SELECT when the handset is not in use. Press  or  to select > DIRECTORY and then press MENU/SELECT twice. 2. Press or  or  , or use the al...

27 C all L og Call Log About Caller ID You can use this telephone with regular caller ID service or combined caller ID with call waiting. You can use the telephone’s other features without subscribing to caller ID services. There might be fees for caller ID services and these services might not be a...

2 C al l Lo g • XX MISSED CALL(S) shows when there are new call log entries (including missed and unreviewed calls). • CALL LOG EMPTY shows when there are no records in the call log. • Only one handset can review the call log at a time. If a handset tries to enter the call log while another handset ...

2 C all L og 4. Press  or  to browse through the call log. • The name (if available), telephone number, date and time of all incoming calls are shown on the screen. • You hear a double beep when the list reaches the beginning or end of the call log. Make a Call Log Entry Ready to Dial Although the...

30 C al l Lo g 4. Press MENU/SELECT to move to the name. The screen displays EDIT NAME. • Use the dialing keys (see “Character Chart” on page 24) to edit the name using the same method as explained in step 3 above. Press # to insert a space. . Press MENU/SELECT to save. • If the entry is already sav...

31 C all L og Redial List The telephone stores the five most recently dialed numbers. • When there are already five entries, the oldest entry is deleted to make room for the new entry. • Entries are shown in reverse chronological order.• Press REDIAL/PAUSE to browse the redial list. Dial a Redial En...

32 An sw er in g Sy st em O pe ra ti on Answering System Operation About the Answering System and Voicemail Your telephone has separate indicators for two different types of voice messages: those left on its built-in answering system and those left at your service provider’s voicemail (fees may appl...

33 An sw er in g Sy st em O pe ra tio n To turn on or off with the telephone base: • Press ANS ON/OFF to turn the answering system on or off. If the answering system is turned on, it announces, “Calls will be answered.” If the answering system is turned off, it announces, “Calls will not be answered...

34 An sw er in g Sy st em O pe ra ti on To play messages with the telephone base: 1. Press /PLAY/STOP to listen to messages. Options during playback:• Press   VOL  to adjust the speaker volume. • Press /SKIP to skip to the next message. • Press /REPEAT to repeat the message currently playing. Pres...

3 An sw er in g Sy st em O pe ra tio n To delete all messages with a handset: 1. Press MENU/SELECT to show the menu. 2. Press MENU/SELECT to select > ANS. SYSTEM . 3. Press  or  to select > DEL ALL OLD , then press MENU/SELECT . 4. The handset shows DELETE ALL OLD MSGS? Press MENU/SELECT to ...

3 An sw er in g Sy st em O pe ra ti on Window displays Descriptions 1-99 (flashing) Current message number during new message playback. 1-99 Current message number during old message playback. 1-8 T Telephone base speaker volume level while adjusting. -- Telephone is answering a call or being access...

3 Ad di ti on al I nf o Additional Information Handset Display Screen Messages ALREADY SAVED The telephone number entered is already stored in the directory. CALL LOG EMPTY There are no call log entries. CALLING HANDSET X Calling another handset. CONNECTING... The cordless handset is searching for t...

40 Ad di ti on al I nf o Handset and Telephone Base Indicators Handset Lights On when the handset speakerphone is in use. CHARGE On when the handset is charging in the telephone base or charger. Telephone Base Lights IN USE Flashes when there is an incoming call or another telephone sharing the same...

41 Ad dit io na l I nfo Battery It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance: Operation Operating time While in handset use (talking*) Up to eight hours While in speakerphone mode (talking*) Up to five hours While not...

42 Ad di ti on al I nf o Expanding your Telephone System The handsets provided with your telephone system are pre-registered. Each handset is assigned a number that shows on the handset display. Additional handsets registered to the telephone system are assigned in sequential order. For instance, if...

43 Ad dit io na l I nfo Replace a Handset If you want to replace a handset or re-assign the designated handset number of a registered handset, you must de-register all the handsets and then individually register each handset.To make de-registration easier, read all of the instructions on this page b...

44 Ad di ti on al I nf o Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit your local RadioShack store or www.RadioShack.com. My telephone does not work at all. • Make sure the battery is installed and charged correctly (see pag...

2 Ad di ti on al I nf o Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructio...

3 Ad dit io na l I nfo • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technici...

4 Ad di ti on al I nf o Maintenance • Taking care of your telephone– Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. • Avoid rough treatment– Place the handset down gently. Save the original packing materials to protect your telephone if you ever nee...

Ad dit io na l I nfo • Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery cha...

Ad di ti on al I nf o FCC Information This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interferenc...

7 Ad dit io na l I nfo The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be c...